1. Introduction
The TK909 Pet GPS Tracker is designed to locate and track pets using existing GSM/GPRS networks and GPS satellites. It offers real-time tracking, geofencing, and various alarm functions to help you keep your pet safe. This manual provides detailed instructions for setting up and operating your device.
Product Video Overview
2. Specifications
| Content | Specs. |
|---|---|
| Size | 70mm * 37mm * 20mm (2.7" * 1.4" * 0.78") |
| Net Weight | 44g |
| Ver. 2G | GSM: 850/900/1800/1900MHz |
| Network | GSM/GPRS |
| GPS sensitivity | -159dBm |
| GPS accuracy | 5m |
| Time To First Fix | Cold status 45s, Warm status 35s, Hot status 1s |
| Input | 5V - 1.0A |
| Battery | Rechargeable 3.7V 1000mAh Li-ion battery |
| Charging Period | 3 hours |
| Standby | 10 days (up to 400 hours) |
| Storage Temp. | -40 to +85 centigrade degree |
| Operation Temp. | -20 to +55 centigrade degree |
| Humidity | 5%-95% non-condensing |
3. Getting Started
3.1 Package Contents
Please check the package contents upon receipt:
- 1 x Main Unit (GPS Tracker, available in 6 colors)
- 1 x USB Cable
- 1 x User Manual
- 1 x Original Box (Optional)
3.2 Device Overview
Familiarize yourself with the components and indicator lights of your GPS tracker:
- SOS Button: Used for emergency alerts.
- GPS Signal Indicator Light: Shows GPS signal status.
- GPRS Signal Indicator Light: Shows GPRS network status.
- SIM Card Slot: For inserting the GSM SIM card.
- USB Port: For charging the device.
Indicator Light Status Meanings:
| Indicator Light Status | Meaning |
|---|---|
| Yellow light - Solid | No GPRS signal |
| Yellow light - Flash | GPRS connection |
| Blue light - Solid | No GPS signal |
| Blue light - Flash | GPS connection |
| Yellow & Blue lights - off | In a Power Saving Zone |
3.3 Charging the GPS Tracker
Before first use, fully charge your GPS tracker using the provided USB cable.
- Connect the USB cable to the device's USB Power Connector and a 5V-1.0A power source.
- The red light on the device indicates that the battery is charging.
- Once the battery is fully charged, the red light will disappear.
NOTE: Do not use a fast charger. This can damage the battery.
3.4 SIM Card Installation
The TK909 tracker requires a 2G GSM SIM card for network communication. Ensure your SIM card meets the following requirements:
- It must be a Normal SIM card (Standard SIM card). If you have a Nano/Micro SIM card, you will need an adapter.
- The SIM card must support making calls, sending messages, and GPRS network.
- Ensure the SIM card's PIN code is deactivated.
- Make sure call forwarding is not active.
- The SIM card must have sufficient balance.
Installation Steps:
- Open the rubber cover on the device.
- Insert the standard SIM card into the SIM card slot correctly.
- The indicator light will turn on when the SIM card is inserted.
- The device automatically turns off when the SIM card is removed.
NOTE: GPS ONLY works outdoors. Make a note of your GPS SIM card number for future reference.
4. Operation
4.1 SMS Tracking
All SMS commands are identical to APP commands. The device will execute the last command received via SMS or APP.
To get position: Call the SIM card phone number in the tracker, or send the message "G123456#" to the SIM card phone number in the tracker. You will receive a Google Maps link of the device's position.
Explanation of SMS Parameters:
- lat:XX.XXXXX lon:YYY.YYYYY: Positioning of the latitude and longitude values.
- Spd:ZZZ: Device moving speed in km/h.
- T:DD/MM/YY HH:MM: Real-time tracking time (Default is London time, can be set in APP).
- bat:PPP%: Battery charge remaining (between 10% and 100%). Alarms if below 20%.
- ID:XXXXXXXXXX: Device ID number for APP and platform login.
- Last:T:DD/MM/YY HH:MM: Time when tracker got the last GPS signal.
- Google maps link: Link to Google Maps showing the tracker's position.
- lac:XXXX YYYY: Real-time LBS positioning data (when no GPS signal).
4.2 Admin Number Setting
After setting an admin number, all SMS operations to the device will only be accepted from this number.
- Command:
admin123456 [phone number](Use your mobile phone number, not the tracker's SIM card number). - Reply:
admin ok - Example:
admin123456 13265790180
If the unit triggers an over-speed, shake sensor, or low battery alarm, it will send an alert to the admin number.
To cancel admin number:
- Command:
noadmin123456 - Reply:
noadmin ok
4.3 SOS Function Setting
Set an SOS number to receive emergency alerts.
- Command:
sos123456 [phone number] - Reply:
sos number ok
After setting, press the SOS button for 3 seconds. The device will send "help alarm!" SMS to the SOS number.
To cancel SOS number:
- Command:
nosos123456 - Reply:
nosos number ok
4.4 Terminal (Local) Time Setting
Adjust the device's local time zone for SMS positioning.
- Command:
timezone123456 [local time zone](e.g.,timezone123456 +1for GMT+1,timezone123456 -1for GMT-1,timezone123456 0for GMT0). - Reply:
time ok!
4.5 Reset Hardware
Resets the device to factory settings, except for APN settings.
- Command:
begin123456 - Reply:
begin ok
4.6 Online Tracking (Web Platform & Mobile App)
For online tracking via web platform or mobile app, you need to set the APN (Access Point Name) for your tracker. If the device is already online on the APP, you may not need to send these commands.
Every SIM card carrier has its own APN content. You can find this by checking your SIM card carrier online or by inserting the SIM card into a mobile phone to find the APN settings.
APN Setting Commands:
| Instruction | Command | Reply |
|---|---|---|
| Set APN (any existing will be replaced) | apn123456 [apn content] |
apn ok |
| Set APN username | apnuser123456 [content] |
apnuser ok |
| Set APN password | apnpasswd123456 [content] |
apnpasswd ok |
NOTE: There is a small blank space after '123456' in every command. After successful APN setting, re-insert the SIM card to reboot the device.
Example for SpeedTalk SIM card (US):
- APN: Mobilenet
- APN username: (none)
- APN password: (none)
To set APN for SpeedTalk, send SMS: apn123456 mobilenet. Once you receive "apn ok", remove and re-insert the SIM card to reboot.
Web Platform Tracking:
- Platform: www.mytkstar.net
- Select "Login by ID" on the bottom of the screen.
- ID No.: Found on the back side of the device cover.
- Password: 123456
Mobile App Tracking:
Search for "WINNES GPS" in the Apple App Store or Google Play Store, or scan the QR Code below to install the application on your cell phone.
Login by ID (for single tracker):
- Select "Login by ID" on the bottom of the screen.
- Server: www.mytkstar.net
- ID No.: Found on the back side of the device cover.
Login by Username (for multiple trackers):
- Click "Sign Up" on the app to register an account. You can add multiple device ID numbers to your account.
- Select "Login by username" on the bottom of the screen.
- Server: www.mytkstar.net
- Username: The email used to create your account.
- Password: The password you set during registration.
Real-time Tracking:
The app and web platform provide real-time tracking of your device. On the map, use "+" and "-" to zoom in and out. You can also switch between 2D/3D map views.
History Route Playback:
The "Historical route" feature allows you to view the device's route history for up to six months by selecting a start and end time. This is available on both the web platform and the mobile app.
Geofence Setup:
Set up a virtual boundary (geofence) for your tracker. If the device moves outside this area, an alarm will be triggered.
Steps:
- Select "Geofence" on the screen.
- Click the "+" icon in the upper right corner of the main menu.
- The device's current position will be set as the center automatically.
- Adjust the radius distance using "+" and "-" on the map (default is 100 meters, recommended is over 500 meters).
- Click "OK" to save settings. The device will send alarm information when it exits the defined range.
- Long press on a geofence to delete it.
Alarm Functions:
The device supports various alarms, configurable via the app's "Issue" icon settings:
- Set Admin number: The phone number that controls the device via SMS and receives alarm messages. (Cancel by deleting the number and clicking "OK".)
- Set SOS number: The number that receives SOS alarm messages. (Cancel by deleting the number and clicking "OK".)
- Low Battery Alarm Switch: Turn on/off low battery alarm messages.
- Set Overspeed Alarm: Input a speed value. If the unit exceeds this speed in continuous positioning mode, it sends "speed alarm!" every 5 minutes to the admin number. (Cancel by entering "0" and clicking "OK".)
- Shake Alarm: After setting, keep the tracker stationary for 5 minutes. If the unit is shocked, it sends "sensor alarm!" to the admin number.
- Vibration Alarm Switch: If enabled, you receive a vibration alarm when the tracker vibrates in sleep mode. An alarm is issued if vibration occurs after 5 minutes of continuous stationary.
Sleep Mode:
- Sleep by time mode: After this setting, the tracker works for 5 minutes after waking up, then returns to sleep mode. GPS shuts off, and GSM works in low consumption mode. SMS or calls can wake up the tracker.
- Sleep by shock sensor mode: If no shock for 5 minutes, the tracker enters "sleep by shock" mode. GPS shuts off, and GSM works in low consumption. Vibration, SMS, or calls can wake up the tracker.
LED Indicator Light Control:
You can turn the LED indicator light on or off via the app settings.
5. Troubleshooting & FAQ
Here are common issues and their solutions:
-
Fail to turn it on:
- Please check if the battery is charged.
-
No SIM signal:
- Check if the SIM card is installed correctly.
- Verify the network frequency band supported by the SIM card.
- Ensure the SIM card's PIN code is deactivated.
- Confirm that call forwarding is not active.
-
No GPS signal:
- Move the device to an area with a more open view of the sky to ensure it can receive the GPS signal normally.
-
No reply to SMS command:
- The command format might be wrong.
- The SIM card might have insufficient balance.
- Ensure the SIM card supports calls, messages, GPRS, and has call display enabled with call forwarding turned off.
-
SMS position OK, but cannot use the APP and web platform:
- Check if the APN is correctly set. Refer to section 4.6 for APN settings.
-
Platform position is different from the actual position:
- If there's no uploading position time or GPS signal, call the device's phone number to receive a position message.
- If the message shows LBS data (e.g., `lac:27a4 1223`), it means there is no GPS signal, and the position shown is the last known GPS location.
- If the message shows GPS data (e.g., `lat:22.63952 lon:114.17122`), it means the device hasn't reached its uploading time yet.
Notices: Do not disassemble the device without authorization.
6. Safety Information
6.1 Electromagnetic Compatibility
Avoid very strong magnetic fields (e.g., transformers) as they can cause variations in transmission, leading to malfunctions or damage to your Winnes GPS device.
6.2 Risks for Children and People in Need of Care
This device is not intended for use by individuals (including children) with limited physical, sensory, or mental abilities, or lack of experience/knowledge, unless supervised or instructed by a responsible person.
Note: Some countries, states, or regions have laws regarding location-based tracking. It is the sole responsibility of the owner and user to comply with local laws and regulations. Switch off the Winnes GPS tracker before boarding a plane.
6.3 General Safety Advice
A faulty electrical installation or excessive mains voltage can cause electric shock.
- Before use, ensure the mains voltage of the socket matches the information on the type plate.
- Connect the power supply unit to an easily accessible socket to quickly disconnect the charging cable in case of a fault.
- If you notice any visible damage to your GPS tracker or charging cable, do not use it.
- Do not open the housing of the GPS tracker. Repairs should be performed by qualified specialists. Incorrect repairs or operation will void liability and warranty claims.
7. Battery Information
7.1 Battery Operation
Your tracker is powered by a rechargeable lithium polymer battery.
- The battery of the Winnes GPS device cannot be replaced or removed by the user.
- Do not disassemble, throw batteries into fire, or short-circuit them.
- Do not burn or pierce the GPS tracker. Protect it from mechanical damage.
- Never expose the device to excessive heat (sunshine, fire, etc.) as this increases the risk of battery leakage.
- Only use the USB cable provided with your Winnes GPS device. Using other cables might overcharge the battery, leading to fire or explosion.
Disregarding these instructions can cause damage and potentially lead to battery explosion.
7.2 Disposal
Batteries are hazardous waste. Dispose of batteries and the GPS device according to local provisions. Information can be obtained from your local council waste disposal facility.
Dispose of packaging materials (cardboard, plastics) according to type for recycling.
8. Compliance
8.1 Declaration of Conformity
CE RED Directive 2014/53/EU: Juneo declares that the TKSTAR/Winnes GPS Tracker (item no. TK909) conforms to the fundamental requirements and other relevant provisions of directive 2014/53/EU.
The full text of the declaration of conformity can be viewed on the website: www.mytkstar.net/en/doc.html
9. User Tips
Based on common usage and device features, here are some tips for optimal performance:
- Outdoor Use: For best GPS accuracy, ensure the tracker has a clear view of the sky. GPS signals are often weak or unavailable indoors.
- SIM Card Management: Regularly check your SIM card balance to ensure continuous tracking and alarm functionality.
- APN Configuration: If online tracking isn't working, double-check your APN settings. Incorrect APN is a common cause for connectivity issues.
- Battery Care: Always use the provided charging cable and avoid fast chargers to prolong battery life.
- Geofence Strategy: When setting up a geofence, consider a radius of over 500 meters for better reliability, as the default 100 meters might be too small for consistent tracking in some environments.
- Admin Number: Designate a reliable admin number to receive critical alerts like low battery or overspeed warnings.