YuXi Charging PCB Board and Power Switch Flex Cable

Contents

Instruction Manual for Charging PCB Board & Power Switch Flex Cable

Model: Charging PCB Board and Power Switch Flex Cable

Brand: YuXi

1. Product Overview

This product includes 5PCS charging PCB boards and power switch flex cables, specifically designed for Sony game consoles. It is compatible with PS3 slim, PS2, and PS4, with multiple ribbon flex cable pin options (10pin, 12pin, 14pin) to match different console models. The set is used for replacing faulty charging PCB boards or power switch flex cables, ensuring stable power supply and normal operation of the game console.

2. Product Specifications

SpecificationDetail
Quantity5PCS (Charging PCB Board + Power Switch Flex Cable Set)
Product TypeCharging PCB Board, Power Switch Ribbon Flex Cable
Flex Cable Pin Options10pin, 12pin, 14pin
Compatible ConsolesPS3 slim, PS2, PS4
FunctionReplace faulty charging PCB boards and power switch flex cables to restore console power function
Package Dimensions (L x W x H)8cm x 5cm x 4cm
Package Weight0.02 kg
EU LVD VoltageLow voltage: Below 50Vac or 75Vdc
Wireless FunctionalityNo
Battery IncludedNo
High-concerned chemicalNone
ApplicationConsumer Electronics
OriginMainland China

3. Setup (Installation Guide)

Please refer to the following steps for proper installation:

  1. Turn off the game console and disconnect it from the power source. Use appropriate tools (e.g., screwdriver, pry tool) to carefully disassemble the console shell, following the console's disassembly instructions.
  2. Locate the old charging PCB board and power switch flex cable inside the console. Gently disconnect the flex cable from the PCB connector (use a pry tool if needed, avoid pulling the cable directly).
  3. Remove the old charging PCB board and flex cable, then take the new set. Select the flex cable with the correct pin count (10pin/12pin/14pin) that matches your console model (PS3 slim/PS2/PS4).
  4. Install the new charging PCB board in the correct position, then connect the new flex cable to the corresponding PCB connector firmly (ensure it is fully inserted to avoid poor contact).
  5. Reassemble the console shell, tighten the screws, connect the console to the power source, and turn it on to test the charging function and power switch response.

Visual Guide for Flex Cable Selection

The following images illustrate the various flex cable types and their pin configurations, which are crucial for selecting the correct replacement part for your console.

Image showing various flex cables with pin counts and console compatibility (PS4, PS2, PS3 slim).
Figure 1: Overview of different flex cable types and their console compatibility.
Image showing various flex cables with pin counts and dimensions.
Figure 2: Detailed view of flex cables with pin counts and dimensions for accurate selection.
Example of a 10Pin 0.5 35mm flex cable for PS4.
Figure 3: 10Pin 0.5 35mm flex cable for PS4.
Example of a 14Pin 0.5 100mm flex cable for PS4.
Figure 4: 14Pin 0.5 100mm flex cable for PS4.
Example of a 12Pin 0.5 100mm flex cable for PS4.
Figure 5: 12Pin 0.5 100mm flex cable for PS4.
Example of a 7Pin 1.0 250mm flex cable for PS2.
Figure 6: 7Pin 1.0 250mm flex cable for PS2.
Example of a 6Pin 0.5 100mm B flex cable for PS3 slim.
Figure 7: 6Pin 0.5 100mm B flex cable for PS3 slim.
Image of a packaged flex cable with a label showing '14Pin x 100mm'.
Figure 8: Example of packaged flex cable.

Product Video Overview

This video provides a general overview of various electronic components, including some of the flex cables and connectors similar to those in this product set.

Video 1: Product showcase of various electronic components.

4. Operating Instructions

After successful installation, the charging PCB board will provide stable power transmission for the console, supporting normal charging (if applicable) and power supply. The power switch flex cable ensures sensitive response of the console's power button, enabling smooth on/off operation.

Select the correct pin count (10pin/12pin/14pin) according to your console model; incorrect pin count will cause the product to fail to work. This set is compatible with PS3 slim, PS2, and PS4, suitable for console maintenance and part replacement.

5. Maintenance

  • Handle the flex cable with care; avoid bending, twisting, or pulling it violently to prevent internal wire breakage.
  • Store unused PCB boards and flex cables in a dry, dust-free environment, away from moisture and high temperature.

6. Troubleshooting

  • Product Not Functioning After Installation: Ensure you have selected the correct flex cable pin count (10pin/12pin/14pin) for your specific console model (PS3 slim/PS2/PS4). An incorrect pin count will prevent the product from working.
  • Intermittent Power/Charging: Verify that the new flex cable is fully inserted into the corresponding PCB connector to avoid poor contact.
  • Console Damage During Installation: Always disconnect the console from the power source before disassembly and installation to prevent short circuits or damage to internal components. Use appropriate tools for disassembly to avoid scratching the console shell or internal components.

7. User Tips

While specific user tips were not provided, general advice for electronic component replacement includes:

  • Always double-check compatibility before starting any repair.
  • Work in a clean, well-lit area to prevent loss of small parts and ensure clear visibility.
  • Use anti-static precautions (e.g., an anti-static wrist strap) to protect sensitive electronic components from electrostatic discharge.

8. Warranty and Support

For any questions or assistance regarding this product, please contact our customer service. We are committed to providing support for our products.

A user manual in PDF format is also available for download: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.