1. Introduction
This manual provides essential information for the safe and effective installation, operation, and maintenance of your MAGIC COLORM Car Front Bumper Fog Lamp Assembly. Please read this manual thoroughly before installation and keep it for future reference.

Figure 1: Product installed on vehicle and product overview.
2. Safety Information
WARNING: Failure to follow these safety instructions may result in product malfunction, damage, or personal injury.
- Do not modify or disassemble the product's circuitry. This may cause malfunctions or safety hazards.
- Do not use the product in damp, high temperature, or flammable/explosive environments.
- Do not adjust the lights while driving to avoid distractions and ensure road safety.
- If abnormal flashing, unusual noise, or odor is detected from the fog lights while driving, turn off the power immediately and conduct an inspection.
3. Package Contents
Please check the package to ensure all items are present and undamaged:
- 2 x Fog Light Assemblies with LED DRL
- 2 x Front Bumper Fog Light Covers/Bezels
- Wiring Harness (if included in specific kit)

Figure 2: Components of the fog lamp assembly kit.
4. Setup and Installation
Professional installation is recommended for optimal performance and safety.
- Pre-Installation Check: After unboxing, visually inspect all items for any damage. Before permanent installation, connect the fog lights to the vehicle's 12V power source for a functional test to ensure proper operation of both the fog light and the LED DRL.
- Plan Installation Location: Identify the designated area or reserved slot on your vehicle's front bumper where the fog lights will be installed.
- Prepare Surface: Thoroughly clean the installation surface to ensure it is free of dust, oil, and moisture. This guarantees a secure and proper fit.
- Mounting: Securely mount the fog light assemblies into their designated slots. Ensure all wiring harnesses are securely connected and properly fastened, with no risk of loosening.
- Connect Wiring: Connect the wiring harness according to your vehicle's electrical system. Ensure all connections are secure and insulated.
- Install Covers: Attach the front bumper fog light covers/bezels around the newly installed fog lights.

Figure 3: Front bumper fog light covers.
5. Operating Instructions
Your fog lamp assembly includes both fog lights and LED Daytime Running Lights (DRL).
- Fog Lights: These are primarily designed to improve forward visibility in low-visibility conditions such as rain, fog, heavy snow, or dust. Activate them using your vehicle's standard fog light switch.
- LED DRL: These lights enhance vehicle visibility to other road users during daylight hours. They typically activate automatically with the vehicle's ignition or can be wired to a separate switch.
Important Usage Precautions:
- Avoid exposing the fog lights to extreme temperatures, excessive humidity, or corrosive environments for extended periods.
- Do not misuse fog lights in normal weather or well-lit conditions to avoid causing glare to other road users.

Figure 4: Demonstration of lighting effects.
Video 1: Product display and lighting effects demonstration.
6. Maintenance
- Cleaning: Periodically clean the lens of the fog lights with a soft, damp cloth to remove dirt and debris that may obstruct light output. Avoid abrasive cleaners.
- Inspection: Regularly check wiring connections for any signs of wear, corrosion, or loosening. Ensure the lights are securely mounted.
- Vehicle Storage: If the vehicle will be parked and unused for an extended period, it is recommended to turn off the power to all added lighting devices to prevent battery drain.
7. Troubleshooting
- Fog Lights Not Illuminating:
- Check if the vehicle's power supply is normal.
- Inspect whether the fog light fuse is blown and replace if necessary.
- Verify that all power and wire connections are secure and reliable.
- Abnormal Lighting (e.g., Unstable Brightness):
- Check for loose or oxidized wiring harness connectors and clean/secure them.
- Inspect the vehicle's voltage stability.
- Overheating Lens or Condensation Inside:
- Stop using immediately. Overheating may indicate an electrical issue.
- Condensation may affect sealing. Contact a professional for inspection.
8. Specifications
| Feature | Description |
|---|---|
| Product Type | Fog Lamp Assembly |
| Special Features | Fog Light Cover with LED DRL (Daytime Running Lights) |
| Voltage | 12 V |
| Material | ABS Housing, PC Lens, LED |
| Color | Black (Covers), Clear (Lens) |
| Item Weight (each) | Approx. 1 kg |
| Package Dimensions (L x W x H) | 40 cm x 25 cm x 14 cm |
| Package Weight | 1.272 kg |
| Origin | Mainland China |
Feature Overview:
- Provides compliant light penetration to effectively enhance driving safety in adverse weather conditions.
- Durable design with good compatibility with the vehicle's electrical system.
- Low energy consumption and long service life.

Figure 5: Product detail highlights.
9. User Tips
- Ensure compatibility with your vehicle model and year (e.g., Hyundai Elantra GT I30 2012-2016) before starting installation.
- Always perform a functional test of the lights before fully securing them to avoid re-work.
10. Warranty and Support
For any questions, concerns, or issues regarding your MAGIC COLORM Car Front Bumper Fog Lamp Assembly, please contact the store customer service where you purchased the product.