1. Introduction
This manual provides essential information for the installation, operation, and maintenance of your HIGHRS Iridium Spark Plugs and Performance Ignition Coils. These components are designed to enhance your vehicle's ignition system, offering improved performance and reliability.
The HIGHRS ignition coil features higher ignition energy compared to ordinary ignition coils, leading to smoother acceleration, more linear power delivery, elimination of idle shaking, and resolution of jerking problems. The spark plugs are double iridium for enhanced durability and performance.
Video: Demonstration of HIGHRS Performance Ignition Coils.
2. Product Features
- Direct fit for specified vehicle models.
- Plug and Play, non-destructive installation.
- Accurate igniting for optimal engine function.
- Improved combustion efficiency.
- Increased ignition energy by 5% to 36% compared to original equipment.
- Designed to eliminate idle shaking and resolve jerking issues.
3. Specifications
3.1 General Product Specifications
| Attribute | Value |
|---|---|
| Brand Name | HIGHRS |
| Manufacturer Part Number | HG-062 G |
| OEM NO. | 12137594937 |
| Interchange Part Number | 12137594938, 1213172219, 12122158253 |
| Replace Parts # | 0221504470, UF-592, 00044, 12137594 937, 12137571643 |
| Material | PBT PPO Copper |
| Ignition Type | Separate Ignition |
| Type | Open Magnetic |
| Country/Region of Car Manufacture | Germany |
| Origin | Mainland China |
| High-concerned chemical | None |
3.2 Packaging Dimensions & Weight
- Length: 21 cm
- Width: 20 cm
- Height: 12 cm
- Weight: 1.98 kg
3.3 Spark Plug Models and Engine Compatibility
This product includes double iridium spark plugs. Please ensure you select the correct spark plug model for your engine series.
SP-060 Double Iridium Spark Plug: Fits for N51 N52 engines.
SP-062 Double Iridium Spark Plug: Fits for N13 N18 N20 N43 N53 N54 N55 S55 S63 engines.
4. Vehicle Fitment
This product is compatible with a wide range of BMW and Mini Cooper models. Please refer to the list below to confirm compatibility with your vehicle.
Image: Comprehensive list of compatible BMW and Mini Cooper vehicle models.
Partial list of compatible models:
- BMW 1 SERIES M 2011
- BMW 128I 2008-2013
- BMW 130I 2006-2010
- BMW 135I 2008-2010
- BMW 320I 2005
- BMW 323I 2007-2011
- BMW 325CI 2006
- BMW 325I 2006-2010
- BMW 325XI 2006
- BMW 328I 2007-2013
- BMW 328XI 2007-2008
- BMW 330I 2007
- BMW 335I 2007-2010
- BMW 335IS 2011-2013
- BMW 335XI 2007-2008
- BMW 525I 2006-2009
- BMW 525XI 2006-2007
- BMW 528I 2008-2011
- BMW 528XI 2008
- BMW 530I 2005-2009
- BMW 530XI 2006-2007
- BMW 535I 2008-2009
- BMW 535XI 2008
- BMW 550I 2010-2016
- BMW 550I GT 2010-2015
- BMW 650I 2012-2016
- BMW 740I 2011-2012
- BMW 740LI 2011-2012
- BMW 750I 2009-2015
- BMW 750LI 2009-2015
- BMW 760LI 2009-2015
- BMW ALPINA B7 2011-2015
- BMW ALPINA B7L 2011-2013
- BMW M5 2013-2016
- BMW M6 2012-2016
- BMW X3 2007-2012
- BMW X5 2007-2016
- BMW X6 2008-2016
- BMW Z4 2006-2016
- MINI COOPER 2006-2013
- MINI COOPER COUNTRYMAN 2011-2013
- ROLLS-ROYCE GHOST 2011-2012
- ROLLS-ROYCE PHANTOM 2011-2012
5. Installation & Setup
The HIGHRS ignition coils and iridium spark plugs are designed for a direct fit and plug-and-play installation. However, proper post-installation steps are crucial for optimal performance.
- **Physical Installation**: Install the new ignition coils and spark plugs into their respective positions in the engine. Ensure all connections are secure.
- **Diagnostic Computer Connection**: After physical installation, connect a diagnostic computer to your vehicle's onboard ECU.
- **Clear Fault Codes**: Use the diagnostic computer to clear any existing fault codes.
- **ECU Re-matching**: This process allows the onboard ECU to re-match the ignition coil data, ensuring proper coordination between the engine and the new ignition components. This step is vital for achieving the advertised performance benefits and stable operation.
Warning: Incorrect installation or failure to clear fault codes and re-match the ECU may lead to suboptimal performance or engine issues. Professional installation is recommended if you are unfamiliar with these procedures.
6. Operating Guidelines
Once properly installed and the ECU re-matched, your HIGHRS Iridium Spark Plugs and Performance Ignition Coils will operate automatically as part of your vehicle's ignition system. No special operating procedures are required beyond normal vehicle use. You should experience:
- Smoother engine operation.
- Improved acceleration response.
- More consistent power delivery.
- Reduced or eliminated idle shaking and jerking problems.
7. Maintenance
HIGHRS Iridium Spark Plugs and Performance Ignition Coils are designed for long-lasting performance and typically require no specific maintenance beyond regular vehicle service intervals. It is recommended to:
- Follow your vehicle manufacturer's recommended service schedule.
- Inspect ignition components during routine maintenance for any signs of wear or damage.
- Ensure all electrical connections remain clean and secure.
8. Troubleshooting
If you experience issues after installation, such as continued misfires, rough idling, or reduced performance, consider the following troubleshooting steps:
- **Re-check Connections**: Ensure all ignition coil connectors are fully seated and locked.
- **Verify Spark Plug Installation**: Confirm spark plugs are correctly torqued and seated.
- **Diagnostic Scan**: Perform another diagnostic scan to check for new or persistent fault codes. Clear any codes and re-evaluate.
- **ECU Re-match**: If not done initially, or if issues persist, ensure the ECU has been properly re-matched to the new ignition coils using a diagnostic computer.
- **Identify Misfiring Cylinder**: If a specific cylinder is misfiring, you can swap the ignition coil from that cylinder with a known good one (e.g., from another cylinder) to determine if the coil itself is faulty.
- **Consult a Professional**: If problems persist after basic troubleshooting, it is advisable to consult a qualified automotive technician.
9. Warranty & Support
HIGHRS provides a **2-year quality warranty** starting from the date of purchase. For any issues or warranty claims, please adhere to the following guidelines:
- **Contact within 7 Days**: If you encounter any problems, please contact us within 7 days of receiving the product.
- **Provide Video Evidence**: To facilitate warranty claims, you must provide a video demonstrating the issue. This video should show:
- The engine running with the HIGHRS coils installed.
- You taking off the connector plug of the misfiring coil.
- You plugging the connector back in after a short while.
- **Replacement Process**: If a fault is confirmed, a replacement part will be sent immediately. Upon receiving the replacement, you are instructed to break the connector plug of the faulty coil. This procedure eliminates the need to return the defective part, simplifying the warranty process.
- **Incorrect Purchase**: If you purchased the wrong item by mistake, it could be returned. However, due to high international shipping costs, we suggest reselling it locally and purchasing the correct part.
- **User Responsibility**: The buyer is responsible for issues arising from incorrect installation or improper usage.
For further assistance or to view the official user manual in PDF format, please refer to the following document: User Manual (PDF)
10. User Tips
- Always ensure your vehicle's battery is disconnected before performing any work on the ignition system.
- When installing spark plugs, use a torque wrench to tighten them to the manufacturer's specifications to prevent damage or loosening.
- If you are unsure about any installation steps, it is always best to seek assistance from a certified mechanic.
- Keep a record of your purchase date for warranty purposes.
- Regularly check your engine for any unusual sounds or performance changes, which could indicate an issue with the ignition system or other components.