1. Introduction
This manual provides essential information for the safe and effective use of your Malcayang PDC (Park Distance Control) Parking Sensor, model 95720-3W000. This sensor is designed to assist drivers in parking by detecting obstacles and is a direct replacement part for compatible vehicles.

Figure 1: Malcayang PDC Parking Sensor (Top View)
2. Safety & Warnings
Important Safety Information: Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
3. Product Description & Features
The Malcayang PDC Parking Sensor is a durable and reliable component designed for vehicle parking assistance systems. It features:
- Material: High-quality ABS for durability.
- Type: Visible sensor.
- Corrosion Resistance: Engineered for long-lasting performance.
- Direct Replacement: Designed to perfectly fit and replace original equipment sensors.
Compatibility: This sensor is compatible with various models, including Kia Sportage 2.0L 2.4L from 2011-2013, among others. Please verify the OEM part number for exact fitment.
4. Setup & Installation
Professional installation is highly recommended for this product. Installation instructions are NOT included with the sensor.
To install the sensor:
- Ensure the vehicle's ignition is off and the battery is disconnected if working near electrical components.
- Locate the old or broken parking sensor on your vehicle's bumper.
- Carefully remove the old sensor. This may involve disconnecting an electrical connector and releasing retaining clips.
- Connect the new Malcayang PDC Parking Sensor to the vehicle's wiring harness. Ensure a secure connection.
- Insert the new sensor into its designated slot in the bumper until it is securely seated.
- Reconnect the vehicle's battery (if disconnected) and test the parking assist system.

Figure 2: Sensor Electrical Connector
5. Operating Instructions
The PDC Parking Sensor operates automatically as part of your vehicle's parking assist system. When the vehicle is put into reverse gear, the system typically activates, and the sensors begin to detect obstacles. The system will provide audible or visual warnings (depending on your vehicle's specific features) to indicate the proximity of objects.
6. Maintenance
- Cleaning: Keep the sensor surface clean from dirt, mud, ice, or snow. Use a soft cloth and mild soap solution if necessary. Avoid abrasive cleaners or tools that could scratch the sensor.
- Inspection: Periodically inspect the sensor for any physical damage, cracks, or loose connections. Ensure it is securely mounted in the bumper.
- Avoid Impact: Protect the sensor from direct impacts, which can damage its internal components.
7. Troubleshooting
If your parking sensor system is not functioning correctly after installation, consider the following:
- Sensor Not Working: Check the electrical connection to the sensor to ensure it is firm and properly seated.
- False Alarms or Inconsistent Readings: Ensure the sensor surface is clean and free from obstructions (dirt, ice, stickers, etc.). Verify the sensor is correctly installed and flush with the bumper surface.
- System Error Message: If your vehicle displays a system error, it may indicate a fault beyond the sensor itself. Consult a professional mechanic or your vehicle's service manual.
- Professional Diagnosis: For persistent issues, professional diagnostic tools may be required to identify the root cause.
8. Specifications
| Attribute | Detail |
|---|---|
| Brand Name | Malcayang |
| Model Name | Parking PDC Sensor Reverse Assist Bumper |
| OEM NO. | 95720-3W000, 957203W000, 96890-3X000, 968903X000, 95720-2T000, 957202T000, 95721-2T100, 957212T100, 95720-3W100, 957203W100, 95720-3U100, 957203U100, 96890-A5000, 96890A5000, 4MS271H7D, 4MS271H7A, SW0012 |
| Material | ABS |
| Type | Visible |
| Talk Range | Standard |
| Certification | CE |
| Origin | Mainland China |
| Package Dimensions (L x W x H) | 8 cm x 6 cm x 5 cm |
| Package Weight | 0.08 kg |
9. User Tips
- Always double-check the OEM part number against your vehicle's original sensor to ensure perfect compatibility before purchasing and installing.
- When replacing, take note of the orientation of the original sensor to ensure the new one is installed correctly.
- After installation, perform a functional test in a safe, open area to confirm the sensor is working as expected.
10. Manufacturer Information & Support
Manufacturer:
Company Name: Guangzhou yangchi auto parts co.LTD
Address: CN-2 # 1003 min jie ke chuang, minying ke ji yuan, tai he zhen, baiyun district, Guangzhou
E-Mail: ouyan99@dingtalk.com
Telephone: 86-18102513142
EU Authorized Representative:
Company Name: CET PRODUCT SERVICE LTD
Address: Osterholzallee 144, 71636 Ludwigsburg Germany
E-Mail: info.cetservice@gmail.com
Telephone: Tel +4971416432236
For further details and compliance information, please refer to the official User Manual (PDF) available at https://manuals.plus/m/dcbe382a6a390a9e7626023a523fcb7b778f1634cc43bc1b420e81423c94d286.