1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your TNCE Tuya WiFi Smart Circuit Breaker. Please read this manual carefully before use to ensure safe and efficient operation.
The TNCE Smart Circuit Breaker is an automatic reclosing protector that integrates multiple safety features including over-voltage, under-voltage, over-current, and leakage protections. It also offers smart functionalities such as app remote control, voice control, timing functions, electricity metering, group control, and device sharing.

2. Safety Information
- WARNING: To avoid danger of suffocation, keep packaging bags away from babies and children. Do not use this bag in cribs, beds, carriages, or playpens. This bag is not a toy.
- Ensure that the screws on the wires are tightened and will not loosen or fall off before turning on the power.
- All devices require a neutral wire to function properly.
- This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
3. Installation
Each device has a corresponding wiring diagram. Please strictly follow the requirements for wiring. Ensure all devices require a neutral wire to work properly.

3.1 Wiring Instructions
Refer to the wiring diagram provided in the product description or SKU option picture. Ensure all connections are secure and correctly aligned with the 'IN' (Inlet side) and 'OUT' (Outlet side) terminals as indicated on the device.
3.2 Device Pairing (Wi-Fi Version)
For the Wi-Fi version, ensure your Wi-Fi network is 2.4GHz. Using a 5GHz Wi-Fi network or a mixed-mode Wi-Fi network may cause pairing failure.
- Long press the pairing button (labeled "Down" or "ON/OFF" in some diagrams, often the bottom right button) on the device for about 5 seconds until the Wi-Fi indicator flashes rapidly.
- Open the Tuya or Smart Life application on your mobile phone.
- Click on the plus sign (+) to add a device.
- The app should search for nearby devices. Click on the discovered "Breaker" device.
- Follow the prompts in the app to enter your Wi-Fi information and complete the matching process.
- Once successfully added, the device will appear in your app.
Video 1: Demonstrates the pairing process for the TNCE Smart Circuit Breaker with the Tuya/Smart Life app.
3.3 Device Pairing (Zigbee Version)
If you purchased the Zigbee version, a Tuya Zigbee gateway is required for proper function. This gateway must be purchased separately.
4. Operation
4.1 App Remote Control
Control your circuit breaker remotely using the Tuya or Smart Life app. You can turn the device on/off, monitor energy consumption, and adjust settings from anywhere.

4.2 Voice Control
The device is compatible with Google Home and Amazon Alexa. Use voice commands to control the circuit breaker.
- "Hey Google/Alexa, turn off the devices in the room."
- "Hey Google/Alexa, turn on the [device name]."

4.3 Backlight Function
The device features a backlight that turns on when operated and automatically turns off when not in use, enhancing visibility and saving energy.

4.4 Timing Function
Set schedules to automatically turn the device on or off at regular intervals. This feature is useful for automating lighting, appliances, or other connected loads.

4.5 Electricity Metering
Monitor your total forward energy consumption for each day, month, and year directly through the app. This helps in tracking and managing electricity usage.

4.6 Group Control Function
Multiple devices in different rooms can be grouped together for simultaneous control, simplifying management of your smart home.

4.7 Device Sharing
Share control of your smart circuit breaker with family and friends through the app, allowing multiple users to manage the device.

4.8 Expenses Management (Prepayment)
The app allows for expenses management, including prepayment settings. You can enable prepayment and manage electrical energy consumption based on cost.
To access: In the app, navigate to the device, then select "Expenses" or "Expenses Management". You can enable/disable prepayment, set charge energy, and clear energy data.
4.9 Alarm Settings
Configure various alarm thresholds for enhanced safety and monitoring:
- Leakage Current: Threshold Settings (10-99mA).
- High Temperature Alarm: Threshold Settings (10-85°C).
- Over Current: Threshold Settings (1-63A).
- Overvoltage Alarm: Threshold Settings (120-275V).
- Undervoltage Alarm: Threshold Settings (80-175V).
These settings can be adjusted within the device's settings section in the app.
5. Maintenance
To ensure optimal performance and longevity of your TNCE Smart Circuit Breaker, regular maintenance is recommended:
- Keep the device clean and free from dust and debris.
- Periodically check all wiring connections to ensure they remain tight and secure.
- Ensure the device is not exposed to excessive moisture or extreme temperatures outside its operating range.
6. Troubleshooting
If you encounter any issues with your TNCE Smart Circuit Breaker, please refer to the following:
- Device not pairing:
- Ensure your Wi-Fi network is 2.4GHz (for Wi-Fi version). 5GHz or mixed-mode networks may cause pairing failure.
- For Zigbee version, ensure a Tuya Zigbee gateway is properly installed and connected.
- Long press the pairing button for 5 seconds until the indicator flashes rapidly.
- Device not responding:
- Check power supply to the device.
- Verify Wi-Fi/Zigbee connection status in the app.
- Restart the device by cycling its power.
- Fault reason: You can check the fault reason directly on the app.
If you encounter a problem that cannot be resolved, please contact customer service manually through the methods indicated in the support section.
7. Specifications
| Attribute | Value |
|---|---|
| Brand Name | TNCE |
| Model Number | Smart Energy Meter |
| EU LVD Voltage | High voltage: Above 50Vac or 75Vdc |
| Voltage | 220V |
| Origin | Mainland China |
| Certification | CE, RoHS |
| Working Frequency | 50/60Hz |
| Rated Voltage | AC110/230V |
| Rated current setting range | 1.0-63A |
| Overvoltage setting range | 120-300V (adjustable) |
| Undervoltage setting range | 80-210V (adjustable) |
| Leakage protector setting range | 10-99mA (adjustable) |
| Temperature measurement | 10-85°C (adjustable) |
| Battery display range | 0-9999.99Kw/h |
| Check battery level | hour/ day/ month/ year |
| Metered prepayment | Recharge battery |
| Operating temperature | -30°C to 70°C |
| Timer function | Countdown/ Timing/ Cycle Timing/ Inching Switch |
| Power off memory | Normally open/ normally closed/ memory last time |
| Reclosing time | 1-99 seconds |
| Number of reclosing | 1-30 times |
| Cause of issue | you can check the fault reason on app |
| Protection level | IP20 |
| Reset/Start Delay function | 10-99s |
| Voltage measurement accuracy | 1% (not exceeding 1% of the total range) |
| Connection protocol | 2.4Ghz WIFI |
| APP | compatible with Tuya app and Smart Life app |
7.1 Harmonized Standards and Technical Specifications
The following harmonized standards and technical specifications have been applied:
- IEC 62321-3-1:2013, IEC 62321-5:2013
- IEC 62321-4:2013+AMD1:2017 CSV
- IEC 62321-6:2015, IEC 62321-7-1:2015
- IEC 62321-7-2:2017, IEC 62321-8:2017
- EN 55032:2015+A11:2020, EN 55035:2017+A11:2020
- EN IEC 61000-3-2:2019, EN 61000-3-3:2013+A1:2019
- EN IEC 62368-1:2020+A11:2020
8. User Tips
- Wiring: The product title mentions "2P" (2-pole), which typically means it disconnects both live and neutral wires. Always confirm with the wiring diagram for your specific model to ensure correct installation, especially regarding neutral wire connection.
- App Connectivity: If you experience issues connecting to the app, double-check that your Wi-Fi is 2.4GHz and that the device is in pairing mode (rapidly flashing indicator).
9. Warranty and Support
9.1 Contact Support
If you encounter any unresolved issues or require further assistance, please contact customer service:
- Scan the QR code (see Figure 10) with the AliExpress TNC app on your mobile phone for 24-hour professional consultation, guidance, and after-sales service.
- Alternatively, contact the seller directly via the provided contact information:
- EU Representative (SUCCESS COURIER SL):
Address: CALLE RIO TORMES NO.1, 1ST FLOOR, RIGHT WORKSHOP 3, FUENLABRADA, MADRID, ES(Spain)
Email: successservice2@hotmail.com
Tel: +34 910602659 - UK Representative (EVATOSTCONSULTINGLTD):
Address: Office 101 32 Threadneedle Street, London City of London, UK (United Kingdom)
Email: contact@evatost.com
Tel: +44 2076494690

9.2 Recycling Information
This device, its accessories, cords, and batteries are recyclable. Please dispose of packaging elements in the sorting bin.
