Laiwen AS-T1S-SK

Contents

Laiwen CIC Intelligent Sound Amplifier Hearing Aid User Manual

Model: AS-T1S-SK

1. Introduction and Overview

Thank you for choosing the Laiwen CIC Intelligent Sound Amplifier Hearing Aid. This manual provides essential information for the proper use, maintenance, and troubleshooting of your device. Please read it carefully to ensure optimal performance and longevity of your hearing aid.

1.1 Product Features

  • Digital Chip Design: Advanced digital processing for clear sound.
  • Light & Good Fit: Designed to be lightweight and fit comfortably within the ear canal.
  • Stable Amplification: Provides consistent and reliable sound amplification.
  • Long Battery Life: Battery lasts up to 40 hours.
  • Adaptable for mild to profound hearing loss.
  • Noise Cancelling: Helps reduce background noise for clearer hearing.
  • Designed for comfort with easy controls.
Diagram showing key features: Digital Chip Design, Light&Good Fit, Stable Amplification, Battery Lasts 40 Hours.
Figure 1: Key Features of the Hearing Aid

1.2 Main Application and Scope

This hearing aid is designed for compensation of a patient's hearing loss, suitable for individuals with mild to profound hearing loss.

1.3 Life of Product

The estimated life of the hearing aid is 3 years. Earplugs should be replaced once per year, and batteries approximately every 60 hours of use.

2. Safety Information and Warnings

Important Warning:

This product will not restore normal hearing and will not prevent or improve hearing impairment resulting from organic conditions. This product is designed to help you make greater use of your remaining hearing. You should keep in mind that it can take time to become accustomed to hear new sounds. For best results, using the hearing aids as much as possible.

Medical Evaluation:

It is good practice for a person with a hearing loss to have a medical evaluation by a licensed physician (preferably a physician who specializes in diseases of the ear). Licensed physicians who specialize in diseases of the ear are often referred to as otolaryngologists, otologists, or otorhinolaryngologists. The purpose of a medical evaluation is to assure that all medically treatable conditions that may affect hearing are identified and treated.

Children with Hearing Loss:

In addition to seeing a physician for a medical evaluation, a child with a hearing loss should be directed to an audiologist for evaluation and rehabilitation. Because hearing loss may cause problems in language, educational and social development of a child. An audiologist is qualified to assist the evaluation and rehabilitation of a child with hearing loss. The hearing aid is not applicable for children under 36 months of age and should only be worn by children under adult guidance.

High Sound Levels:

Hearing aids are able to provide more than 132 dB SPL. The hearing aids should be fitted by the professional operator otherwise there may be a risk of impairing the remaining hearing of the patient; The hearing aid should be only used for the hearing impaired, not for other applications.

Choking Hazard:

Avoid being swallowed by children, keep small parts out of children's reach. Once you find that children swallow the battery, please immediately send him/her to hospital.

Biocompatibility and Electromagnetic Compatibility:

Our products meet the requirements of biocompatibility and electromagnetic compatibility relevant. Should stay away from X-ray, MR scans, CT scans, short-wave diathermy, or similar radiation treatments, which have an EMC impact on product.

Special User Considerations:

  • Children can't wear the hearing aid without the guidance of adult.
  • Mental patients should consult a physician before wearing a hearing aid.
  • The hearing aid is not applicable for children under age 36 months.

When to Consult a Hearing Care Professional:

You should see a hearing care professional if you:

  • Visible congenital or traumatic deformity of the ear.
  • History of ear infection or continuous drainage from the ear within the previous 90 days.
  • Sudden unilateral or bilateral hearing loss onset within the previous 90 days.
  • Have acute or chronic dizziness, poor dexterity, poor vision, or significant dementia.
  • Suspect that you have significant ear wax accumulation or a foreign object in the ear canal. Symptoms of significant ear wax accumulation can may lead itching in your ear, a feeling of fullness in your ear, and/or reduced hearing.
  • Experience pain or discomfort in the ear.
  • Have a noticeable difference in hearing between ears.
  • Have sudden onset or rapid worsening of tinnitus (ringing in the ear) in one or both ears within previoust 90 days.

3. Product Components and Operating Principle

The audible signal is converted into electrical signal through the microphone and is magnified via IC. Then the electrical signal is converted into the audible signal through the receiver. There are analog and digital circuits to amplify the signal through IC. Then the receiver will accept the amplified electrical signal and restore to sound, to achieve the sound amplification purpose and make the compensation for the hearing loss patient. Help the hearing loss patients work and live like normal people.

3.1 Component Identification

Diagram showing internal and external components of the hearing aid: Pull Wire, Battery Door, VC (Volume Control), Microphone, Ear Dome.
Figure 2: Hearing Aid Components (Button Model)

Components (Button Model):

  1. Ear Dome
  2. Shell
  3. Microphone
  4. Battery Door
  5. Pull Wire
  6. Button

Components (VC Model):

  1. Ear Dome
  2. Shell
  3. Microphone
  4. Battery Door
  5. Pull Wire
  6. VC (Volume Control)
Detailed diagram of hearing aid components including Pull Wire, Battery Compartment, Volume Knob, Microphone, and Earplugs. Also shows a fitting range graph.
Figure 3: Detailed Component View and Fitting Range

4. Setup Instructions

4.1 Installing Battery

  1. Open the battery door gently with your fingers.
  2. Use the brush's magnet to hold the battery (positive side up) and insert it into the compartment. Avoid touching the battery directly with your hands.
  3. Brush flat move to the direction of the battery door to separate the battery and brush.
  4. Close the battery door gently. Do not force it, as this may cause damage.
  5. Ensure the "+" sign on the battery aligns with the "+" sign on the battery door.
Quick Guide showing 6 steps for battery installation: 1. Remove battery label. 2. Open battery door. 3. Pick up battery with magnetic brush. 4. Insert battery. 5. Adjust volume dial. 6. Select ear dome and insert hearing aid.
Figure 4: Battery Installation Quick Guide

Battery Model:

10A (PR70)

Compatible Product Models:

D-C-C2B, D-C-C1B, D-L-C1B, D-L-C2B, D-L-C1L, D-L-C2L

4.2 Replacing Earplug

Disassembly:

Pinch the earplug with your hand to separate it from the connector.

Image showing how to pinch and remove the earplug from the hearing aid connector.
Figure 5: Earplug Disassembly

Assembly:

Select the appropriate size of earplug, hold it, and correctly insert it into the connector. Ensure the bottom of the earplug reaches the bottom of the connector so it does not drop off when gently pulled.

Image showing how to correctly attach an earplug to the hearing aid connector.
Figure 6: Earplug Assembly

Tips for Earplug Selection:

  • It is recommended to start with an M size ear dome.
  • If the ear dome is too small, the hearing aid may whistle when worn. Choose a larger size.
  • If the ear dome is too big, you may not be able to wear it comfortably. Choose a smaller size.

4.3 Power On/Off

The battery door also functions as the on/off switch:

  • ON: The battery door is fully closed.
  • OFF: The battery door is open.

If your hearing aid has a Power-On delay feature, it will take several seconds to power up after being turned on. This allows you to place the hearing aid in your ear before it starts amplifying sound. Turn off the hearing aids when not in use to reduce battery consumption.

4.4 Placing the Hearing Aid on the Ear

  1. Turn on the hearing aid before placing it on your ear.
  2. Hold the hearing aid with your thumb and forefinger on the outer edges of the case or by the pull wire on the device faceplate.
  3. Gently insert the canal tip of the instrument into your ear canal until you feel resistance.
  4. Use the tip of your forefinger to softly move the hearing aid forward or backward to position it correctly in the ear canal.
  5. To assist with proper positioning, you can pull the outer ear backwards and upwards with your other hand.
Image showing a hearing aid discreetly placed inside a person's ear.
Figure 7: Hearing Aid Placement in Ear

5. Operating Instructions

5.1 Volume Control (Optional)

For models with a volume control dial:

  • Rotate clockwise to gradually increase the volume.
  • Rotate counter-clockwise to gradually decrease the volume.
Diagram illustrating the volume control dial on the hearing aid, showing 'lower' and 'louder' directions.
Figure 8: Volume Control Dial

Tip:

It is suggested to lower the hearing aid volume before wearing it to avoid whistling in the ear canal.

5.2 Button Control (Optional)

For models with a button control:

  • Program Switch: Press the button to cycle through different program modes. Each press switches to the next program. When the battery door is closed and power is on, the hearing aid automatically defaults to "Program 1".
  • Program Memory: If your hearing aid has program memory, it will return to the last used program when turned back on.
  • Volume Cycle (Short Press - 1 second): Cycle to change the volume. Each short press drops the volume by 3dB. When the lowest volume is reached, pressing again will set the volume to the maximum value within the setting range.
  • Program Mode Switch (Long Press - 2 seconds): Press and hold for 2 seconds to switch between different program modes.
  • Sleep Mode (Extra-long Press - 5 seconds): Press and hold the program button for 5 seconds to enter sleep mode, saving power. Press again for 5 seconds to exit sleep mode and return to working status.

5.3 Removing the Hearing Aid

  • Grasp the device with your thumb and forefinger and gently rotate it as you pull outward.
  • For devices with a pull wire, grasp the pull wire and gently take the hearing aid out of your ear.
  • WARNING: Never use the battery door to pull the hearing aid out, as this can cause damage.

6. Maintenance

Regular cleaning and proper care are essential for the optimal performance and longevity of your hearing aid. Earwax accumulation can significantly affect sound quality.

6.1 Cleaning Hearing Aid

  • Clean and wipe your hearing aid with a dry, soft cloth.
  • Image showing a hand cleaning the hearing aid with a dry soft cloth.
    Figure 9: Cleaning with a Dry Soft Cloth
  • Use the provided brush to clear earwax from the sound hole of the hearing aid.
  • Image showing a brush being used to clean the sound hole of the hearing aid.
    Figure 10: Cleaning the Sound Hole with a Brush
  • When cleaning, place the hearing aid on a soft surface (e.g., a soft cloth or towel on a desk) to prevent damage if it accidentally falls.
  • Image showing a hearing aid placed on a soft cloth for cleaning.
    Figure 11: Cleaning on a Soft Surface
  • Never use any liquid, including water, to clean the hearing aid, as this can cause permanent damage to the circuitry.

6.2 Precautions for Hearing Aids

  • Periodic Inspection: Regular inspections by a hearing aid specialist are recommended to check the device and replace accessories as needed.
  • Moisture-proof: Moisture is a primary concern for hearing aids. Use a special drying box at night to remove moisture and extend the device's life.
  • Waterproof: Do not wear the hearing aid while swimming or in the rain. If it accidentally falls into water, do not use a dryer. Dry it with a soft, clean cotton cloth and place it in a ventilated environment. If a failure occurs, please contact with your local audiologist or contact with the staff from customer service center.
  • Anti-high temperature: Avoid high temperatures or prolonged exposure to sunlight.
  • Anti-vibration: Do not drop your hearing aids or knock them against hard surfaces.
  • Battery Care: Use only the correct battery type. Remove batteries if the device will not be used for a long time to prevent leakage. Keep batteries out of reach of children and infants to prevent accidental ingestion.

7. Troubleshooting

If you encounter any issues with your hearing aid, refer to the table below for common problems and their solutions. If the problem persists, contact an audiologist or customer service.

Failure Cause Solution
Whistling Hearing aid not worn correctly Correctly wear the hearing aid.
Volume is too loud Turn down the volume.
Cracked hearing aid Contact an audiologist.
Hands or objects too close to hearing aid / Too much earwax Move hands/objects away or ensure sufficient distance. Clean earwax or contact an audiologist.
No sound Power off Turn on.
Battery not installed / Low battery or no power Install the battery / Replace with a new battery.
Dirt blocks earplug or tube Clean earwax or contact an audiologist.
Battery failure / Poor contact between battery and pole Replace with new battery / Contact an audiologist.
Small voice / Not clear / Distortion Low battery Replace with a new battery.
Hearing loss change Consult an audiologist.
Hearing aid is damped Dry it with a dry box or contact an audiologist.
Dirt blocks the sound tube Clean the sound tube or contact an audiologist.
Can't adjust volume Volume at maximum or minimum level Rotate the volume knob in the opposite direction.
Dirt blocks sound tube or earplug Clean or contact an audiologist.
Hearing aid still on when not in use / Battery expired Turn off when not in use / Check battery validity.
High power consumption Hearing aid is damped Dry it with a dry box or contact an audiologist.
Poor battery quality Replace it with a new battery.
Local leakage Send it to local service center for maintenance.

8. Specifications

Attribute Value
Brand Name Laiwen
Model Number AS-T1S-SK
Type CIC Hearing Aids, Mini Inside The Ear
Recommended for Hearing Loss Less than 80dB
Battery Type A10 (PR70) battery for hearing aids
Origin China Mainland
Rated Voltage DC1.4V
Normal Atmospheric Pressure Range 86Kpa ~ 106Kpa
Operating Temperature 0°C ~ +40°C
Operating Humidity 0%RH ~ 80%RH
Storage & Transport Temperature -20°C ~ +50°C
Storage & Transport Humidity 0%RH ~ 93%RH
IP Rating IP22 (Protected against solid foreign objects of 12.5 mm and greater; Protected against vertically falling water drops when enclosure tilted up to 15°)

Note:

At least 30 minutes are required for the device to warm from minimum storage temperature or cool from maximum storage temperature before wearing.

9. Warranty and Support

9.1 Unpacking and Check

Upon receiving your hearing aid, please perform the following checks:

  • Verify that the actual parts match the accessory list provided.
  • Confirm that the model marked on the warranty card is consistent with the hearing aid model.
  • Ensure the serial number on the warranty card matches the hearing aid's serial number.
Image showing the contents of the product package: Instructions, Quick Guide, Battery #10, Earplugs *2, Cleaning Brush, Wax Guard and Tool *2.
Figure 12: What's Included in the Package

9.2 Free Warranty Coverage

For any device, failures caused by non-human factors will receive free warranty service from the date of purchase. Please refer to your warranty card for the specific warranty period.

9.3 Exceptions from Free Warranty

The free warranty does not cover:

  • Damage caused by incorrect use or improper operation.
  • Damage resulting from disassembly, assembly of parts, or other human-caused damage.
  • Damage caused by irresistible reasons (e.g., floods, fires, earthquakes).
  • Unauthorized changes to the hearing aid model or serial number on the warranty card.
  • Absence of a valid warranty card.

For any questions or issues, please contact your local service center. Our customer service team, including professional technical personnel and audiologists, is available to provide support and solutions.

A user manual (PDF) is available for download: View User Manual (PDF)

10. User Tips

  • Battery Life: The included #10 batteries typically last between 3 to 5 days, or approximately 40-60 hours of continuous use, depending on the power level used. Keep spare batteries on hand.
  • Comfort and Sound: Many users find these hearing aids very comfortable and appreciate the clear sound quality. Experiment with different earplug sizes to find the best fit for comfort and to prevent whistling.
  • Small Size: The compact, invisible design is a key feature, making them discreet and easy to wear. However, their small size means they can be easily misplaced, so store them carefully when not in use.
  • Ease of Use: Users report that the hearing aids are easy to put on and take off.
  • Packaging: The product often arrives well-packaged in a protective case, which is useful for storage and protection of the hearing aid.

11. Frequently Asked Questions (FAQ)

Q: Is this hearing aid suitable for hearing loss above 100dB?
A: This hearing aid is recommended for hearing loss less than 80dB. For hearing loss above 80dB, please consult a hearing care professional for suitable options.
Q: How long does the battery last?
A: The A10 (PR70) battery typically lasts for 3 to 5 days, or approximately 40-60 hours of continuous use, depending on the amplification level.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.