1. Introduction
Thank you for choosing the FIFINE X3 Bluetooth Wireless Headset. This manual provides essential information for the proper and safe use of your headphones. Please read it thoroughly before use and keep it for future reference.
2. Important Safety Information
- Do not expose the headphones to extreme temperatures, humidity, or corrosive environments.
- Avoid dropping or subjecting the headphones to strong impacts.
- Do not disassemble or attempt to repair the headphones yourself. This will void the warranty.
- Keep the headphones away from children and pets.
- Use only the provided charging cable and a compatible power adapter (5V, 1A) to prevent damage.
- Prolonged listening at high volumes may cause hearing damage. Adjust volume to a safe level.
3. Package Contents
Please check the box for the following items:
- FIFINE X3 Wireless Noise Canceling Stereo Headphones (1)
- USB-A to USB-C Charging Cable (1)
- 3.5mm Audio Cable (1)
- User's Manual (1)

4. Product Overview
Familiarize yourself with the controls and ports on your FIFINE X3 headphones:

- ANC Button: Controls Active Noise Cancellation and Transparency Mode.
- Volume Control: Adjusts volume, skips tracks.
- Power Button: Power on/off, play/pause, answer/end calls.
- Touch Control Panel (Right Earcup): Activates Temporary Transparency Mode, Gaming Mode, Bass Mode.
- Type-C Port: For charging the headphones.
- 3.5mm Audio Jack: For wired connection.
5. Initial Setup
5.1 Charging the Headphones
Before first use, fully charge your headphones.
- Connect the USB-A end of the included charging cable to a PC or a 5V, 1A power adapter (sold separately).
- Connect the USB-C end to the Type-C port on your headphones.
- The indicator light will turn red and flash slowly during charging.
- A full charge takes approximately 2.5 hours.
- Once charging is complete, the indicator will turn white and stay on for 10 minutes before turning off.
- Unplug the USB cable.

5.2 Power On/Off
- Power On: Press and hold the Power button for at least 2 seconds. You will hear "Power ON" and the indicator will light up white for 2 seconds, then flash continuously.
- Power Off: Press and hold the Power button for at least 2 seconds. The indicator will turn from white to red, then off. You will hear "Power OFF".
6. Operating Instructions
6.1 Bluetooth Pairing
- When the headphones are turned on for the first time, the indicator flashes white quickly, and the headphones automatically enter Bluetooth pairing mode.
- Open the Bluetooth settings on your media device (smartphone, tablet, laptop).
- Turn on your device's Bluetooth and search for available devices.
- Select "fifine x3" from the list.
- Once connected, you will hear "Connected" from the headphones, and the indicator will flash white every 5 seconds.
- If the headphones have been paired before, they will automatically reconnect to the last connected device.
- If disconnected, you will hear "Disconnected from the Headphones".

6.2 Multi-Point Connection
The FIFINE X3 supports connecting to two devices simultaneously.
- After turning on the headphones, pair them with the first device.
- Turn off the headphones. Press and hold the Power button for at least 5 seconds to turn them on again and enter multi-point pairing mode. Pair with the second device.
- Reconnect to the first device by selecting the headphones from its Bluetooth device list.
- You can now enjoy seamless switching between the two connected devices.

6.3 Music Playback
- Play/Pause: Press the Power button once.
- Next Song: Press the Power button twice.
- Previous Song: Press the Power button three times.
- Volume Up: Press the Volume Control button once.
- Volume Down: Press and hold the Volume Control button.
6.4 Call Answering
- Answer/End Call: When a call comes in, press the Power button once to answer. Press it again to end the call.
- Reject Call: Press and hold the Power button for at least 1 second to reject an incoming call.
6.5 Mode Control
- ANC Mode ON: In power-on state, press the ANC button until you hear "ANC On". This mode reduces outside noise.
- ANC Mode OFF: Press the ANC button until you hear "ANC Off".
- Transparency Mode: Press and hold the ANC button until you hear "Transparency Mode". This mode reduces music volume and allows you to hear your surroundings.
- Temporary Transparency Mode: When connected, press and hold the Right Touchpad. This temporarily activates transparency mode. Release the Right Touchpad to turn it off.
- Gaming Mode (Low Latency): When connected and not in a call, quickly tap the Right Touchpad three times. You will hear "Gameplay Mode".
- Bass Mode: When connected and ANC is on, quickly tap the Right Touchpad twice to turn on/off Bass Mode.
6.6 Reset Bluetooth Settings
To clear all Bluetooth settings, press and hold the Volume button and ANC button for at least 3 seconds. The white light will stay on for 2 seconds, indicating the reset is complete.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | X3 |
| Connectivity Technology | Wireless Bluetooth 5.3 |
| Frequency Range | 20 Hz - 20 kHz |
| Impedance | 32Ω ± 15% |
| Charging Voltage Range | DC 4.8-6.2V |
| Charging Electric Current | <450 mA |
| Battery Capacity | 600mAh |
| Transmission Range | 164ft (50m) |
| Music Playback Time | Up to 65 hours (35 hours at 100% volume) |
| Communication Time | 40 hours |
| Charging Time | Approx. 2.5 hours |
| Driver Diameter | 40mm |
| Material | Plastic, Leather |
| With Microphone | Yes |
| Active Noise-Cancellation | Yes |
| Volume Control | Yes |
| Control Button | Yes |
| Vocalism Principle | Dynamic |
| Certification | CE, FCC, KC |
8. Troubleshooting
| Problem | Possible Solution |
|---|---|
| Headphones won't turn on. | Ensure the headphones are fully charged. Connect to a power source and check the charging indicator. |
| Cannot pair with Bluetooth device. | Make sure the headphones are in pairing mode (indicator flashing white quickly). Turn off and on your device's Bluetooth. Try resetting the headphones' Bluetooth settings (see section 6.6). Ensure the headphones are not connected to another device. |
| No sound or low volume. | Check the volume levels on both the headphones and your connected device. Ensure the headphones are properly paired. If using wired connection, ensure the 3.5mm cable is fully inserted. |
| Sound quality is poor. | Ensure there are no obstructions between the headphones and your device. Move closer to your device. Try disabling ANC if in a quiet environment. |
| ANC is not working effectively. | Ensure ANC mode is activated (you hear "ANC On"). Make sure the earcups form a good seal around your ears. |
| Microphone quality is poor. | Ensure the microphone is not obstructed. Test in a quieter environment. For critical calls, consider using an alternative microphone if available. |
9. User Tips
- Comfort for Extended Use: The soft ear pads and comfortable fit make these headphones suitable for long listening sessions, work, or travel.
- Versatile Connectivity: In addition to Bluetooth, you can use the included 3.5mm audio cable to connect to devices like laptops or gaming consoles, especially useful if the battery is low or for specific audio needs.
- Optimize Audio Experience: Experiment with the Active Noise Cancellation (ANC), Transparency Mode, Gaming Mode, and Bass Mode to find the optimal audio settings for different environments and content.
- Clear Calls: While the microphone is integrated for clear calls, for professional or critical communication, consider testing its performance in your specific environment.
- Portability: The foldable design allows for easy storage and transport, making them convenient for on-the-go use.

10. Care and Maintenance
- Clean the headphones regularly with a soft, dry cloth.
- Do not use abrasive cleaners, alcohol, or chemical solvents.
- Store the headphones in a cool, dry place away from direct sunlight and extreme temperatures.
- When not in use for extended periods, charge the headphones at least once every three months to maintain battery health.
11. Warranty & Support
Every FIFINE product comes with a Limited Warranty that, under normal use, will be free of any defects in material or workmanship for a period of one year from its original date of purchase. For detailed warranty information, please refer to the warranty policy on the official FIFINE website or contact customer support directly.
For further assistance or to view the original user manual PDF, please refer to the following resource: FIFINE X3 User Manual (PDF)
Authorized European Representative:
Name: AOCE INFORMATION TECHNOLOGY
Address: 61 rue de Lyon 75012 Paris France
Tel: +33-633297410
Authorized British Representative:
Name: AOCE LIMITED
Address: Office Suite 29a 3/F 23 Wharf Street, London, England, SE8 3GG
Tel: +44-759 7659775
12. Compliance Information
This device complies with relevant safety and environmental standards.
- Certifications: CE, FCC, KC
