1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your YOSOO ND72450 72V 450A Brushless DC Motor Controller. This controller is designed to enhance the performance of electric motorcycles and scooters, offering stable control and improved battery life. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. Safety Information
Always observe the following safety precautions to prevent injury or damage to the product:
- Ensure the power supply is disconnected before any installation, wiring, or maintenance.
- Wear appropriate personal protective equipment, including safety glasses and gloves, when working with electrical components.
- Verify all connections are secure and correct according to the wiring diagram before applying power. Incorrect wiring can cause severe damage to the controller and motor.
- Avoid touching the controller or motor during operation, as they may become hot.
- Do not expose the controller to water, excessive moisture, or extreme temperatures.
- Keep out of reach of children.
3. Package Contents
Please check the package for the following items:
- 1 x ND72450 Motor Controller
- 1 x Wire Harness
4. Specifications
| Feature | Specification |
|---|---|
| Item Type | Electric Motorcycle Motor Controller |
| Material | ABS |
| Voltage | 72V |
| Phase Line Current | 450A |
| Busbar Current | 200A |
| Number of FETs | 24 |
| Sensor Type | Hall sensor |
| Applicable Motor Power | ≤4000W (Normal matching value, can be increased for higher torque and speed) |
| Dimensions (L x W x H) | 180mm (7.1in) x 118mm (4.6in) x 55mm (2.2in) |
| Item Weight | 2580g |
5. Setup and Installation
The installation of this product is complex and requires strong hands-on skills or professional assistance. It is compatible with electric motorcycles and electric scooters equipped with brushless DC drivers.
5.1 Wiring Diagram and Connections
Refer to the detailed wiring diagram below for correct connections. Ensure all wires are connected securely to their corresponding terminals.
- Turn Handle Wire (Throttle): Black (Negative), Pink (Positive), Green (Signal).
- Electric Door Lock Wire: Purple and Gray.
- 3 Position Wire: Black + Black and White + Green and White.
- Pull: Black (Negative), Green and White (Any Gear).
- Black and White (High Gear).
- Tap: Black (Negative), Black and White (Tap to change gears).
- Self-Learning Cable: Yellow + Yellow. After plugging in power, turn on the motor. It will automatically rotate to learn. If reverse rotation occurs, re-operate. Unplug the self-learning line after completion.
- High Level Brake Disconnect Wire: Purple.
- Low Level Brake Disconnect Wire: Black + Black Gray.
- Gauge Wire: White (New protocol one wire sensing).
- Reverse Wire: Black + Gray White.
- 5 Gear Wire: Black + Yellow White.
- Cruise Wire: Brown. Connect to the negative pole. Momentary switch operation is required to activate.
- Computer Debugging Port
- Anti-Theft Wire
- Hall Sensor Wire
5.2 Initial Setup
After all connections are made, perform the self-learning process as described for the 'Self-Learning Cable'. This ensures the controller is properly calibrated with your motor.
6. Operating Instructions
The ND72450 controller is a sine wave controller designed for stable and efficient motor control. It is well-matched with QS hub motors or QS mid-drive motors.
- Enhanced Motor Control: This controller significantly increases motor speed and power output.
- Stable Performance: Enjoy smooth and consistent power delivery due to its stable sine wave control.
- Battery Protection: The controller incorporates features to protect your battery, extending its lifespan and increasing driving distance.
Once installed and calibrated, operate your electric motorcycle or scooter as usual, utilizing the throttle, brake, and gear functions as configured during setup.
7. Maintenance
To ensure the longevity and optimal performance of your motor controller, follow these maintenance guidelines:
- Regular Inspection: Periodically check all wiring connections for tightness and signs of wear or corrosion.
- Cleaning: Keep the controller free from dust, dirt, and debris. Use a dry, soft cloth for cleaning. Do not use liquids or solvents.
- Environmental Protection: Avoid exposing the controller to harsh weather conditions, extreme temperatures, or direct impact.
- Professional Check-ups: If you suspect any issues or require advanced diagnostics, consult a professional repair shop.
8. Troubleshooting
If you encounter problems with your motor controller, consider the following common issues:
- Motor Not Responding: Check all power connections, including the battery, motor, and ignition. Ensure the self-learning process was completed successfully.
- Irregular Motor Operation: Verify that all sensor wires (Hall sensor) are correctly connected and not damaged. Re-run the self-learning process if necessary.
- Overheating: Ensure the controller has adequate ventilation and is not covered. Check for any short circuits in the motor or wiring.
- Reduced Performance: Check battery charge level. Inspect all connections for corrosion or loose contacts.
For complex issues, it is recommended to seek assistance from a qualified technician.
9. User Tips
- Professional Installation Recommended: Given the complexity of wiring and calibration, professional installation is highly recommended, especially for users without strong electrical or mechanical skills.
- Online Resources: For visual guidance on installation, search for "fardriver" on video platforms to find relevant installation tutorials.
10. Warranty and Support
For detailed warranty information and technical support, please refer to the official product documentation or contact your retailer. A user manual in PDF format is also available for download from the product page or by searching for the product model online.