Anbernic RG Cube

Contents

ANBERNIC RG Cube Handheld Game Console User Manual

Model: RG Cube

Introduction

This manual provides detailed instructions for the ANBERNIC RG Cube handheld game console. Please read this manual thoroughly before using your device to ensure proper operation and to maximize your gaming experience.

ANBERNIC RG Cube Handheld Game Console
Figure 1: ANBERNIC RG Cube Handheld Game Console
RG Cube in multiple color variants
Figure 2: RG Cube available in various colors

Package Contents

Please check the box for the following items:

  • Game Console x 1
  • Gift Box x 1
  • Screen Protector x 1
  • Type-C Charging Cable x 1
  • User Manual x 1 (This document, also available as PDF)
RG Cube accessories included in the box
Figure 3: Included accessories for the RG Cube

A PDF version of the user manual can be found at: RG Cube User Manual (PDF)

Setup

1. First Boot Up

  1. Upon first boot, you will be prompted to select your preferred language.
  2. Follow the on-screen instructions to complete the initial boot configuration.

2. Charging the Device

Use the provided 5V/2A Type-C charging cable. Plug one end into the console's Type-C port and the other into a compatible USB power adapter (not included).

  • Red light on: Device is charging.
  • Green light on: Device is fully charged.
  • Red light twinkling: Battery is low.

Operating Instructions

1. Main Interface Operation (Android UI)

ControlFunction
D-pad and JoystickSelect application
A key / START key / Y key / Touch screenConfirm / Enter the application
SELECT keyOpen menu
B KeyCancel / Close menu
Volume key +/-Volume adjustment
Function keySwitch Android Front-end
Return keyShort press RETURN / Long press HOME

2. RG Android Front-end Usage

To access the gaming front-end:

  1. On the Android main UI, click the RG icon in the Quick settings tile.
  2. The first time you enter, confirm the prompts. The RetroArch decompression process will run. Once complete, it will return to the RG Front-end.

Emulator Interface Functions:

  • SELECT: Function and settings
  • START: Game search (full emulator)
  • Press X button: Scan and refresh games (after changing to a new TF card)

Game List Interface Functions:

  • SELECT: Game settings interface
  • START: Game search (single emulator)
  • X button: Game collection and cancel operation

3. RG Android Front-end Button Description

ButtonMain Interface of EmulatorGame List Interface
A/Yconfirmconfirm
B/F (Short press)cancel (return)cancel (return)
XScan refresh gamecollect
SELECTFunction and settingssetting
STARTsearchsearch
D-pad (joystick)Moving cursorMoving cursor

Note: Long press the Return key in the game running interface to return to the Android front-end interface.

4. Key Mapping

Open the Key mapping from the Quick settings tile. A usage window will appear. Refer to the application's internal usage details for specific instructions.

5. DP Output (DisplayPort)

The RG Cube supports external display devices via USB-C DisplayPort output. This allows you to connect your console to a larger screen for an enhanced gaming experience.

  • Requirement: DP output requires a data cable with DP function.
Illustration of various usage modes including WiFi projection, DisplayPort output, and Bluetooth connection
Figure 4: Various usage modes: WiFi projection, 1080p DisplayPort output, and Bluetooth connection

6. Joystick Light

The joysticks feature 16 million color RGB lighting. You can customize the lighting effects and brightness:

  • Supported effects: Constant light, breath, rainbow, marquee, chasing, gaming, and more.
  • Customize color and adjust brightness to your preference.
Detail of RGB colorful light ring on joysticks with options for Light, Breath, Rainbow, Marquee, Chasing, Gaming
Figure 5: RGB Colorful Light Ring on Joysticks with various modes

7. Wireless Connectivity

The RG Cube supports multiple wireless connection options:

  • Wi-Fi Projection: Cast your screen wirelessly to compatible displays.
  • Bluetooth Connection: Connect external Bluetooth controllers or audio devices.

RG Cube Game Button and Port Layout

The ANBERNIC RG Cube features a comprehensive set of buttons and ports for an optimal gaming experience. Below is a description of their locations:

Front View:

  • Left Joystick: Located on the left side, below the D-Pad.
  • D-Pad: Cross-shaped directional pad, located on the upper-left.
  • SELECT Button: Small button below the D-Pad.
  • Return Key: Small button below the SELECT button.
  • Right Joystick: Located on the right side, below the Game Buttons.
  • Game Buttons (X, Y, A, B): Standard four-button layout on the upper-right.
  • START Button: Small button below the Game Buttons.
  • Power Key: Small button below the START button.
  • Indicator Light: Small LED light, typically near the top center or right.

Top View (from left to right):

  • LT (L2) Button: Left trigger button.
  • LB (L1) Button: Left bumper button.
  • Air Outlet: Vent for heat dissipation.
  • USB Port: For data transfer or external devices.
  • TEL/INT Port: Likely a headphone jack (3.5mm audio).
  • RB (R1) Button: Right bumper button.
  • RT (R2) Button: Right trigger button.

Maintenance

1. Active Heat Dissipation (Fan)

The RG Cube is equipped with an active cooling fan to prevent overheating during extended use. The fan supports:

  • Automatic speed adjustment mode.
  • Multi-mode speed control.
Diagram of active heat dissipation fan for super-fast cooling
Figure 6: Active heat dissipation system with high-speed fan

2. Screen Care

Use the provided screen protector to prevent scratches. Clean the screen with a soft, lint-free cloth. Avoid using harsh chemicals.

Troubleshooting

  • Device not turning on: Ensure the device is charged. Connect to the charger and wait a few minutes before attempting to power on again.
  • Screen unresponsive: Try restarting the device. If the issue persists, ensure the screen is clean and free of debris.
  • Games not loading/crashing: Ensure your TF card is properly inserted. Try scanning and refreshing games from the emulator interface.
  • Connectivity issues (Wi-Fi/Bluetooth): Check your network settings or Bluetooth device pairing. Ensure the console is within range of the access point or device.
  • Slow performance: Close any unnecessary background applications. Ensure the device has sufficient free storage.

Specifications

FeatureDetail
BrandAnbernic
ModelRG Cube
Operating SystemAndroid
Display Size3.95 inches
Screen TypeIPS, OCA full lamination, Multi-touch
Screen Resolution720*720
Battery Capacity5200 mAh
Expandable StorageUp to 2TB
CommunicationWi-Fi, Bluetooth-compatible
Input/OutputUSB, Type-C (Charging & External Controller Interface)
Motion-sensing technologyHandheld
Games Included9000+ (depending on storage option)
JoysticksHall Effect, RGB lighting
Dimensions (L x W x H)153mm x 86mm x 18mm
Supporting LanguageJapanese, French, German, Italian, Spanish, Portuguese, Russian, English, Polish, Korean, Latin American Spanish, Simplified Chinese, Traditional Chinese Style
Recommended age6+
CertificationCE

User Tips

  • Keep Software Updated: Regularly check for system and emulator updates to ensure optimal performance and compatibility.
  • Protect Your Screen: Always use the provided screen protector to prevent scratches and damage to the IPS display.
  • Manage Storage: If you have many games, consider organizing them or using external storage to keep the system running smoothly.
  • Optimal Charging: Use the original Type-C cable and a compatible 5V/2A adapter for efficient and safe charging.
  • Explore Settings: Take time to explore the Android settings and emulator options to customize your experience.

Warranty and Support

For technical support, product information, or warranty inquiries, please visit the official ANBERNIC website:

https://win.anbernic.com

Please retain your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.