1. Introduction
The Aramox 1218GE-N20 Mini Gear Motor is a compact and versatile micro worm gear reducer brush DC motor designed for various electronic applications. Its robust construction and stable gear transmission make it suitable for projects requiring reliable power output in a small form factor.
Key Features:
- Stable Gear Transmission: Ensures consistent and wear-resistant operation with significant transmission torsion.
- Durable Construction: Made from high-quality copper, brass, and zinc alloy materials for a long service life.
- Protective Coating: Features a 3-layer high-density molecular paint coating that effectively insulates against dust and is resistant to high temperatures.
- Strong Power Output: This brush DC motor delivers powerful and practical motor output.
- Versatile Applications: Ideal for use in electronic locks, smart cars, robots, cameras, and other electronic devices.

2. Specifications
General:
- Item Type: Mini Gear Motor
- Material: Copper, brass, zinc alloy
- Model: 1218GE-N20
- Motor Type: Brush DC motor
- Protect Feature: Explosion-proof
- Commutation: Brush
- Construction: Permanent Magnet
- Origin: Mainland China
- Certification: NONE
- Output Power: <18.65
Performance Parameters (1:236 Reduction Ratio):
| Voltage | No-load Rotate Speed | No-load Current | Load Rotate Speed | Load Current | Load Torsion | Block Load Current | Block Load Torsion |
|---|---|---|---|---|---|---|---|
| 3V | 16RPM | ≤30MA | 13RPM | ≤40MA | 120g.cm | ≤0.4A | 2.6KG.CM |
| 3V | 30RPM | ≤30MA | 25RPM | ≤40MA | 160g.cm | ≤0.4A | 2.2KG.CM |
| 6V | 35RPM | ≤50MA | 28RPM | ≤40MA | 220g.cm | ≤0.4A | 1.5KG.CM |
| 6V | 70RPM | ≤60MA | 61RPM | ≤40MA | 320g.cm | ≤0.4A | 2.2KG.CM |
Approximate Dimensions:
- Motor Body Diameter: Approx. 12mm / 0.5in
- Gearbox Width: Approx. 10mm / 0.4in
- Gearbox Length: Approx. 8.5mm / 0.3in
- Output Shaft Diameter: Approx. 3mm / 0.1in
- Output Shaft Length: Approx. 10mm / 0.4in
- Overall Length (Motor + Gearbox): Approx. 18mm / 0.7in

3. Setup and Installation
This section provides general guidelines for setting up your Mini Gear Motor. For detailed diagrams and specific application instructions, please refer to the official user manual PDF linked in the 'Warranty and Support' section.
Electrical Connection:
- Identify the positive and negative terminals on the motor. These are typically marked or can be identified by the motor's wiring.
- Connect your DC power supply to the motor terminals. Ensure the voltage matches the motor's rated voltage (3V or 6V, depending on the model variant).
- Observe polarity: Reversing polarity will reverse the direction of rotation.

Mechanical Mounting:
- Secure the motor using appropriate mounting brackets or screws through the designated holes on the gearbox.
- Ensure the motor is firmly mounted to prevent vibration and misalignment during operation.
- Connect the output shaft to your desired mechanism (e.g., wheel, gear, lever) using a suitable coupling or direct attachment.
4. Operating Instructions
Once the motor is correctly installed and connected to a power source, it is ready for operation.
- Power On: Apply the rated DC voltage to the motor terminals. The motor should begin to rotate.
- Direction Control: The direction of rotation can be changed by reversing the polarity of the input voltage.
- Speed Control: For variable speed applications, a compatible DC motor speed controller can be used to adjust the voltage supplied to the motor. Refer to the motor's specifications for appropriate voltage ranges.
- Load Management: Avoid exceeding the specified load torsion to prevent damage to the motor or gearbox. Monitor the motor for signs of strain or overheating, especially under continuous operation.
5. Maintenance
Proper maintenance ensures the longevity and optimal performance of your Mini Gear Motor.
- Cleaning: Regularly clean the exterior of the motor to prevent dust and debris accumulation. The 3-layer molecular paint coating helps insulate against dust, but external cleaning is still recommended.
- Inspection: Periodically inspect the motor and gearbox for any signs of wear, damage, or loose connections.
- Lubrication: The gearbox is pre-lubricated. Avoid disassembling the gearbox unless absolutely necessary, as this may void any potential warranty and could lead to improper reassembly.
- Storage: Store the motor in a dry, clean environment away from extreme temperatures and corrosive substances when not in use.
6. Troubleshooting
If you encounter issues with your Mini Gear Motor, refer to the following common problems and solutions:
- Motor Not Running:
- Check power supply: Ensure it is connected correctly and providing the rated voltage.
- Verify connections: Make sure all electrical connections are secure and there are no loose wires.
- Inspect for obstructions: Ensure the output shaft or gears are not mechanically blocked.
- Motor Running Slowly or Weakly:
- Check power supply voltage: Low voltage can cause reduced performance.
- Reduce load: The motor might be overloaded. Ensure the applied load is within the specified torsion limits.
- Inspect for friction: Check for any external friction or binding in the connected mechanism.
- Motor Overheating:
- Reduce load: Continuous operation under heavy load can cause overheating.
- Ensure adequate ventilation: Do not enclose the motor in a way that restricts airflow.
- Check for short circuits: Internal or external short circuits can cause excessive current draw and heat.
- Unusual Noise from Gearbox:
- Check mounting: Ensure the motor is securely mounted and not vibrating against other components.
- Inspect for foreign objects: Small debris might have entered the gearbox.
If the problem persists after attempting these solutions, contact the seller for further assistance.
7. User Tips
Based on user feedback, here are some helpful tips for using your Mini Gear Motor:
- This motor is highly suitable for RC (Remote Control) applications due to its compact size and reliable performance.
- Users appreciate the positioning of the rotating axis, which can be advantageous for various custom projects.
- Its small size and robust design make it a versatile component for a wide range of DIY and electronic projects.

8. Warranty and Support
For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact the seller directly. Keep your proof of purchase for any warranty claims.
For a more detailed user manual and additional technical documentation, you may refer to the official PDF manual available at: User manual (PDF).
9. Frequently Asked Questions (FAQ)
No specific FAQs are available for this product at this time. Please refer to the troubleshooting section or contact support if you have questions.