1. Introduction
This manual provides instructions for the installation, operation, and troubleshooting of your IKSLED Dimmable Touch Sensor Switch. This innovative switch allows for convenient control of LED lighting through various non-metallic surfaces, offering both on/off functionality and dimming capabilities depending on the model.
For optimal performance, please read these instructions carefully before use.
2. Specifications
| Attribute | Value |
|---|---|
| Brand Name | IKSLED |
| Model Number | Touch switch sensor |
| Item Type | SWITCHES |
| Switch Type | Touch On/Off Switch |
| Features | Penetrable switch sensor |
| Material | Plastic |
| Current | 4A |
| Constant Voltage | 3V, 3.7V, 5V, 12V, 24V |
| Max Wattage (3V) | >5W |
| Max Wattage (3.7V) | >7W |
| Max Wattage (5V) | >12W |
| Max Wattage (12V) | >36W |
| Max Wattage (24V) | >48W |
| Certification | CCC |
| Is Smart Device | No |
| Origin | Mainland China |
| Package Weight | 0.069 kg |
| Package Dimensions | 25 x 22 x 2 cm |
The sensor is designed to detect through non-metallic materials such as paper, plastic, acrylic, glass, and wood. Performance may vary with material thickness and density. Thinner materials generally provide better sensitivity. Avoid placing near metal materials to prevent interference.
3. Safety Information
- Ensure the power supply is disconnected before installation or maintenance.
- Verify that the voltage and wattage of your LED light and adapter match the sensor's specifications.
- Do not use induction switches to control motors, solenoid valves, solar lights, constant current lamps, or other equipment not specified for touch switch control.
- Avoid installing the sensor near metal objects, as this may cause interference and affect performance.
- Keep the switch fixed during use to ensure stable operation.
4. Installation and Wiring
Please refer to the wiring diagram and follow these steps for proper installation:
- **Prepare Components**: Ensure you have the touch sensor switch, your LED light, and a compatible constant voltage power adapter (3V, 3.7V, 5V, 12V, or 24V).
- **Connect the Light**: Connect the LED light to the output terminals of the induction switch. Ensure correct polarity (LED+ to switch output positive, LED- to switch output negative).
- **Connect Power**: Connect the power adapter to the input terminals of the induction switch. Ensure correct polarity (Power+ to switch input positive, Power- to switch input negative).
- **Fix the Induction Switch**: Securely fix the induction switch to the desired location, typically underneath the non-metallic surface you wish to make touch-sensitive. Ensure it does not move during use.
- **Apply Power**: Once all connections are secure and the switch is fixed, turn on the power to the system.
Different wire types are available for various applications. Ensure you select the correct type for your setup.
5. Operation
The IKSLED Touch Sensor Switch comes in different models with varying functionalities:
Model A: Touch On, Leave Off
This model operates by detecting the presence of your hand. When your hand is placed over the sensor area (through the surface), the LED light will turn on. When you remove your hand, the LED light will turn off. This model does not support dimming.
Model B: Touch On/Off, Long Touch Dimmable
This model offers more versatile control:
- **Short Touch**: A brief touch on the sensor area will toggle the LED light on or off.
- **Long Touch**: When the light is on, a sustained touch on the sensor area will activate the dimming function, allowing you to adjust the brightness. Release your finger when the desired brightness is reached.
6. User Tips
- **Model Identification**: Models A and B can be visually similar. If not explicitly labeled, test the functionality (especially dimming) to identify your model.
- **Material Thickness**: For best results, use the sensor with non-metallic materials that are as thin as possible. Some users report optimal performance with thicknesses up to 5mm, despite claims of up to 80mm.
- **Stable Installation**: Ensure the sensor is firmly fixed and does not move during use to prevent erratic behavior.
- **Power Memory**: Some models may retain the last brightness setting after power loss, eliminating the need to reset it each time.
7. Maintenance
The IKSLED Touch Sensor Switch requires minimal maintenance. Keep the sensor and surrounding area clean and free from dust or debris that might interfere with its operation. Do not expose the unit to excessive moisture or extreme temperatures.
Always disconnect power before performing any cleaning or inspection.
8. Troubleshooting
If the LED light remains on or off, or the switch does not respond as expected, consider the following:
- **Mismatch of Working Voltage**:
- **Check**: Confirm that your power adapter provides a constant voltage (DC3V, 3.7V, 5V, 12V, or 24V) and that your LED light is compatible with the same voltage.
- **Resolvent**: Ensure the adapter and LED light voltages match the sensor's specifications.
- **Input/Output and Positive/Negative Poles Reversed**:
- **Check**: Verify that the input and output wires are connected with the correct polarity. Positive (+) should connect to positive, and negative (-) to negative.
- **Resolvent**: Turn off the power, correct any reversed connections, and then reapply power.
- **Switch Not Fixed / Movement During Use**:
- **Check**: If the switch moves or is not securely fixed, it may constantly check the environment, leading to erratic behavior.
- **Resolvent**: Turn off the power, securely fix the induction switch in place, and then reapply power.
- **Material Thickness / Type**:
- **Issue**: The sensor may not detect through thick or unsuitable materials. Some users report issues with wood thicker than 5mm.
- **Resolvent**: Test with thinner non-metallic materials. Avoid metal materials entirely.
- **Flickering Light**:
- **Issue**: If the light flickers continuously after installation.
- **Resolvent**: This could indicate an unstable power supply, an overloaded circuit (exceeding max wattage), or a faulty connection. Recheck all connections and ensure power supply stability and wattage compatibility.
If problems persist after following these steps, please refer to the official user manual PDF for further assistance or contact customer support.
The official user manual (PDF) can be referenced here: IKSLED Touch Sensor Switch User Manual (PDF)
9. Frequently Asked Questions (FAQ)
- Q: Can I use this sensor with a 4mm mirror?
- A: Yes, the sensor is designed to work through non-metallic materials like glass, which includes mirrors. For optimal performance, ensure the mirror thickness is within the recommended range (ideally less than 5mm for consistent detection, though up to 80mm is claimed for some models/materials).
- Q: Does the switch remember the last status before power loss?
- A: This feature can vary by specific model or batch. Some versions may have a power-off memory function, while others may default to off or on when power is restored. Please test your specific unit to confirm.
- Q: How do I choose a 24V sensor?
- A: When purchasing, select the option that specifies "24V" for the voltage. Ensure your LED lights and power supply are also rated for 24V to ensure compatibility.
- Q: What is the connection sequence if I disconnect and reconnect the button?
- A: Always ensure the power supply is off before disconnecting or reconnecting any components. The correct sequence is: 1) Connect the LED light to the switch output. 2) Connect the power adapter to the switch input. 3) Securely fix the switch. 4) Turn on the power. If the light doesn't work, refer to the troubleshooting section for voltage and polarity checks.
10. Warranty and Support
This product comes with a 1-year warranty from the date of purchase. The warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.
For technical support or warranty claims, please contact the seller or manufacturer directly with your purchase details.