DEUKIO MF 8000/10000/12000 Series

Contents

DEUKIO MF Series Spinning Reel User Manual

Models: MF 8000, MF 10000, MF 12000 Series

1. Introduction

Thank you for choosing the DEUKIO MF Series Spinning Reel. This manual provides detailed instructions for the proper setup, operation, and maintenance of your new fishing reel. Designed for long-shot jigging and surf fishing, these reels offer robust performance with a high max drag, suitable for both freshwater and saltwater environments. Please read this manual thoroughly before using your reel to ensure optimal performance and longevity.

DEUKIO MF Series Spinning Reel, front view

Figure 1: DEUKIO MF Series Spinning Reel, front view.

2. Safety Precautions

  • Always handle the reel with care to prevent damage to its delicate mechanisms.
  • Keep fingers clear of moving parts during operation.
  • Ensure the reel is securely mounted to your fishing rod before casting.
  • Avoid exposing the reel to extreme temperatures or corrosive chemicals.
  • Store the reel in a dry place away from direct sunlight.

3. Components and Parts Diagram

Familiarize yourself with the various parts of your DEUKIO MF Series Spinning Reel. The following diagram and list identify the key components:

Exploded view of DEUKIO MF Series Spinning Reel with numbered parts

Figure 2: Exploded view of the DEUKIO MF Series Spinning Reel.

Serial No. Part Name
04Drag Lining Washer
05Drag Plate
06Spool (Aluminum)
07Line Clip
08Line Clip Spring
09Click Gear Pedestal
10Clicking Spring
11Clicking Spring Holder
12Clicking Spring Holder Plate
13Screw (Bail Arm & Bail Holder)
14Bail Holder
15Bail Wire
16Shaft
17Brass Nut
18Pinion Square Bushing
19Rotor
20Bail Trip Plunger
21Bail Trip Shaft Spring
22Ball Trip Shaft
23Bail Arm Cover
24Bail Arm Cover Screw
25Bail Arm
26Line Roller Screw
27Line Roller Bushing
31Air Rotor Dust Cover
32Pinion Ball Bearing
33Pinion Ball Bearing Holder
34One Way Clutch
35Pinion (Brass)
36One Way Clutch Spring
37Anti Reverse Shaft
38Anti Reverse Lever
39Anti Reverse Lever Screw
40Anti Reverse Spring
41Body (Graphite)
42Body Ball Bearing
43Drive Gear
44Body Cover Ball Bearing
45Body Cover
46Body Cover Chromed Plate
47Body Cover Screw
48Handle Assembled Set
49Oscillation Gear
50Oscillation Slider Shaft
51Oscillation Slider
52Oscillation Slider Screw
53Handle Screw Cap

4. Setup and Assembly

  1. Attach Handle: Insert the handle into the main body of the reel. The DEUKIO MF Series features an ambidextrous design, allowing the handle to be attached to either side for left or right-handed use. Secure it by tightening the handle screw cap (Part 53). Attaching the handle to the spinning reel

    Figure 3: Attaching the handle.

  2. Mount to Rod: Place the reel foot into the reel seat of your fishing rod. Tighten the reel seat securely to prevent any wobbling during use. DEUKIO MF Series Spinning Reel mounted on a rod

    Figure 4: Reel mounted on a rod.

  3. Spooling Line: Open the bail arm (Part 25). Tie your fishing line to the spool (Part 06) using an appropriate knot. Close the bail arm and begin winding the line onto the spool, ensuring even tension. Do not overfill the spool; leave a small gap from the edge. Spooling line onto the reel

    Figure 5: Spooling fishing line.

5. Operation

The DEUKIO MF Series Spinning Reel is designed for smooth and efficient fishing. Here are the basic operating steps:

Video 1: DEUKIO MF Series Spinning Reel features and smooth operation.

  1. Casting: Hold the rod and line. Open the bail arm. With your index finger, hold the line against the rod. Swing the rod forward, releasing the line with your finger at the peak of the cast.
  2. Retrieving: Once the lure or bait hits the water, close the bail arm manually or by turning the handle. Begin reeling in the line at your desired speed.
  3. Drag Adjustment: The drag system (controlled by the knob on top of the spool) allows line to be pulled out under tension, preventing line breakage when fighting a fish. Turn the drag knob clockwise to increase tension and counter-clockwise to decrease it. Adjust the drag according to the line strength and target fish.
  4. Anti-Reverse: The reel features an anti-reverse lever (Part 38) that prevents the handle from turning backward. Engage this feature for solid hook sets and to prevent the handle from spinning freely during a fight.

6. Maintenance

Regular maintenance will extend the life and performance of your DEUKIO MF Series Spinning Reel:

  • Cleaning: After each use, especially in saltwater, rinse the reel with fresh water to remove salt and debris. Do not submerge the entire reel. Wipe it dry with a soft cloth.
  • Lubrication: Periodically apply a small amount of reel oil to moving parts such as the handle shaft, bail arm pivots, and line roller. Use reel grease for gears (e.g., Drive Gear Part 43, Oscillation Gear Part 49) and main shaft (Part 16). Avoid over-lubrication.
  • Storage: Store your reel in a cool, dry place, ideally in a protective bag or case. Ensure the drag is loosened to prevent compression of the drag washers.
  • Inspection: Regularly check for loose screws, worn parts, or any signs of damage. Replace damaged parts promptly.

7. Troubleshooting

Reel handle is stiff or grinding:
This could be due to dirt, old grease, or lack of lubrication. Disassemble, clean, and re-lubricate the gears and bearings. If the issue persists, inspect for damaged gears.
Line twists frequently:
Ensure your line roller (Part 27) is spinning freely. If it's seized, clean and lubricate it. Also, check if you are overfilling the spool or using line that is too stiff for the reel.
Drag is inconsistent or sticky:
The drag washers (Parts 04, 05) might be dirty, dry, or worn. Clean or replace the drag washers and apply a light coat of drag grease if necessary.
Bail arm does not close properly:
Inspect the bail spring (Part 08) and bail trip mechanism (Parts 20, 21, 22) for damage or obstruction. Clean and lubricate these parts.

8. Specifications

Feature Specification
Brand NameDEUKIO
Model NumberMF (8000, 10000, 12000 Series)
Gear Ratio4.7:1
Max Drag44LB (approx. 20 kg)
Fishing Reels TypeDistant Wheel
Fishing MethodSpinning
Hand DirectionAmbidextrous
MaterialMetal body and components
Baits TypeFake Bait (suitable for various lure types)
PositionOcean Boat Fishing, Ocean Rock Fishing, Ocean Beach Fishing, Lake, River, Reservoir Pond, Stream, Management Field
OriginMainland China
Package Weight0.798 kg
Package Dimensions19 cm (L) x 18 cm (W) x 13 cm (H)

9. User Tips

  • Initial Inspection: Upon receiving your reel, carefully inspect it for any signs of damage, especially if the packaging appears compromised. While the product is generally robust, a quick check ensures everything is in order before use.
  • Pre-Use Lubrication: Some users have noted minor external grease. It's good practice to perform a light cleaning and re-lubrication of key moving parts before the first use to ensure optimal smoothness.
  • Spool Compatibility: If you are looking for an extra spool, check with the seller or manufacturer for compatible options for your specific MF series model (8000, 10000, or 12000).
  • Saltwater Care: For saltwater fishing, thorough rinsing with fresh water after each trip is crucial to prevent corrosion, despite the reel's metal construction.

10. Frequently Asked Questions (FAQ)

Q: Is the body of the reel made of metal?
A: Yes, the DEUKIO MF Series Spinning Reel features a durable metal body construction.
Q: Where can I get an extra spool?
A: Extra spools may be available directly from the manufacturer or authorized dealers. Please specify your reel model (e.g., MF 8000, MF 10000, MF 12000) when inquiring about spare parts.

11. Warranty and Support

For detailed warranty information, product support, or to purchase replacement parts, please refer to the official DEUKIO website or contact your authorized dealer. A comprehensive user manual in PDF format is also available for download at this link.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.