1. Introduction
About This Manual
The operational procedures for Modules 3239 and 3240 are identical. All illustrations in this manual show Module 3239. Button operations are indicated using the letters shown in the illustration. Each section of this manual provides you with the information you need to perform operations in each mode. Further details and technical information can be found in the "Reference" section.
Figure 1.1: Casio W-218H-1B Digital Watch (Black)
General Guide
Pressing the 'C' button changes the watch from mode to mode. In any mode, holding down 'A' for about one second will return to the Timekeeping Mode. In Alarm, Stopwatch, and Dual Time modes, the watch always shows the current Timekeeping Mode time in the lower display area.
Figure 1.2: Watch packaging and included manual
Button Functions
The watch features four buttons: A, B, C, and D. Refer to the diagram below for their general functions.
Figure 1.3: Watch with button labels (A: Light, B: Start/Stop, C: Mode, D: Alarm/Chronograph)
- A (Light): Illuminates the display.
- B (Start/Stop): Used for starting/stopping functions in Stopwatch mode, and for increasing settings.
- C (Mode): Changes between different modes (Timekeeping, Alarm, Stopwatch, Dual Time).
- D (Alarm/Chronograph): Used for resetting values, and for moving between settings.
2. Initial Setup
Setting the Time and Date
- In the Timekeeping Mode, hold down A until the seconds start to flash, indicating the setting screen.
- Press C to move the flashing in the sequence: Seconds → Hour → Minutes → Year → Month → Day.
- When the setting you want to change is flashing, press B to increase it.
- For Seconds: Press D to reset to 00.
- For Hour, Minutes, Year, Month, Day: Press B to increase the setting.
- Pressing B while the seconds are in the range of 30 to 59 resets them to 00 and adds 1 to the minutes. In the range of 00 to 29, the minutes are unchanged.
- Press A to exit the setting screen.
Note: The day of the week is automatically displayed in accordance with the date (year, month, and day) settings. The year can be set in the range of 2000 to 2099.
Toggling Between 12-Hour and 24-Hour Timekeeping
In the Timekeeping Mode, press D to toggle between 12-hour timekeeping and 24-hour timekeeping.
- With the 12-hour format, the 'P' (PM) indicator appears to the left of the hour digits for times in the range of noon to 11:59 p.m. No indicator appears for times in the range of midnight to 11:59 a.m.
- With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without any indicator.
- The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is applied in all other modes.
3. Operating Modes
Timekeeping Mode
This mode displays the current time and date. Press C to cycle through modes. Hold down A for about one second to return to Timekeeping Mode from any other mode.
Figure 3.1: Timekeeping display on wrist
Alarm Mode
The multi-function alarm allows you to set an alarm time (hour, minutes, month, day) and an Hourly Time Signal. You can set the alarm to sound once, or as a snooze alarm that repeats up to seven times every five minutes.
Alarm Types
- Daily alarm: Sounds everyday at the set time.
- Date alarm: Sounds at the specific time on the specific date.
- 1-Month alarm: Sounds everyday at the set time, only during the set month.
- Monthly alarm: Sounds every month at the set time on the set day.
To Set an Alarm Time
- In the Alarm Mode, press C to display the alarm screen.
- Hold down A until the hour setting of the alarm time starts to flash. This operation automatically turns on the one-time alarm.
- Press C to move the flashing in the sequence: Hour → Minutes → Month → Day.
- While a setting is flashing, press B to increase it.
- To set a Daily or Monthly alarm (no month/day), set the month/day to '--' by pressing B until the mark appears.
- Press A to exit the setting screen.
To Select the Alarm Type
- In the Alarm Mode, press C to display the alarm screen.
- Press A to cycle through the available alarm settings: Alarm off → One-time alarm on → Snooze alarm on.
Note: The alarm on indicator and the snooze alarm on indicator are shown on the display in all modes while these functions are turned on. The snooze alarm on indicator flashes during the 5-minute intervals between alarms.
To Stop a Snooze Alarm Operation
Pressing any button stops the alarm tone operation. To stop a snooze alarm during any 5-minute interval, while in Alarm Mode, press C to display the alarm screen, then press A to turn off the alarm or select the one-time alarm.
To Test the Alarm
In the Alarm Mode, hold down B to sound the alarm.
To Turn the Hourly Time Signal On and Off
- In the Alarm Mode, press D to display the Hourly Time Signal screen.
- Press A to turn it on and off.
Note: The Hourly Time Signal on indicator is shown on the display in all modes while this function is turned on.
Stopwatch Mode
The stopwatch lets you measure elapsed time, split times, and two finishes. The display range is 23 hours, 59 minutes, 59.99 seconds. The stopwatch continues to run, restarting from zero after it reaches its limit, until you stop it. The stopwatch measurement operation continues even if you exit the Stopwatch Mode.
To Measure Times with the Stopwatch
- Elapsed time:
- Press B to Start.
- Press B to Stop.
- Press A to Clear.
- Split time:
- Press B to Start.
- Press A to Split (SPL displayed).
- Press A to Split release.
- Press B to Stop.
- Press A to Clear.
- Two Finishes:
- Press B to Start.
- Press A when the first runner finishes (display time of first runner).
- Press B when the second runner finishes.
- Press A to display time of second runner.
- Press A to Clear.
Dual Time Mode
The Dual Time Mode lets you keep track of time in a different time zone. In this mode, the seconds count is synchronized with the seconds count of the Timekeeping Mode.
To Set the Dual Time
- Press C to enter the Dual Time Mode.
- In the Dual Time Mode, hold down A until the hour setting starts to flash, indicating the setting screen.
- Press C to change the selection in the sequence: Hour → Minutes.
- Press B to increase the setting.
- Press A to exit the setting screen.
4. Maintenance
Water Resistance
This watch is rated for 50-meter (5 Bar) water resistance. This means it is suitable for everyday use and can withstand splashes, rain, and brief immersion in water. It is generally suitable for swimming in shallow depths. However, it is NOT suitable for diving or snorkeling. Do not operate buttons while the watch is wet or submerged.
Figure 4.1: Watch back indicating WATER 50M RESIST
Backlight Precautions
- The backlight uses an LED (light-emitting diode) and a light guide panel that cause the entire display to glow for easy reading in the dark.
- In any mode, press A to illuminate the display for about one second.
- The illumination provided by the backlight may be hard to see when viewed under direct sunlight.
- The backlight automatically stops illuminating whenever an alarm sounds.
- Frequent use of the backlight shortens the battery life.
Battery
The watch uses one lithium battery (Type: CR2025). The approximate battery life is 10 years (assuming alarm operation 10 sec./day, and one backlight operation 1.5 sec./day). Frequent use of the backlight shortens the battery life.
Auto Return Features
If you leave a screen with flashing digits for two or three minutes without performing any operation, the watch automatically saves any settings you have made up to that point and exits the setting screen.
5. Troubleshooting
Common Issues and Solutions
| Problem | Possible Cause | Solution |
|---|---|---|
| Display is blank or dim. | Low battery or battery needs replacement. | Replace the battery (CR2025). Consult a professional if unsure. |
| Buttons are unresponsive. | Watch is wet, or internal malfunction. | Ensure watch is dry. If issue persists, contact support. |
| Time is incorrect. | Time has not been set correctly or reset. | Refer to "Setting the Time and Date" section to adjust. |
| Alarm does not sound. | Alarm is turned off or set incorrectly. | Refer to "Alarm Mode" section to ensure alarm is set and turned on. |
6. Specifications
| Feature | Specification |
|---|---|
| Brand Name | Casio |
| Model Number | W-218H-1B (Modules 3239/3240) |
| Item Type | Digital Wristwatches |
| Movement | Digital (Quartz) |
| Display Type | Digital |
| Style | SPORT |
| Case Material | Resin |
| Case Shape | Rectangle |
| Case Thickness | 11 mm |
| Dial Diameter | 43 mm |
| Dial Window Material Type | Resin |
| Band Material Type | Resin |
| Band Length | 21 cm |
| Band Width | 25 mm |
| Clasp Type | Buckle |
| Water Resistance Depth | 5Bar (50 meters) |
| Features | Complete Calendar, Alarm, Week Display, Backlight |
| Accuracy at normal temperature | ±30 seconds a month |
| Battery Type | One lithium battery (CR2025) |
| Battery Life | Approximately 10 years |
| Origin | Japan (movement), Manufactured in China (assembly) |
7. User Tips
- Authenticity Check: To verify originality, press and hold the 'Start/Stop' button (B) in Timekeeping Mode; the display should show "CASIO".
- Durability: This watch is known for its robust build, making it suitable for daily wear and active use.
- Wrist Size: While the watch has a proper size, its design makes it look good on both smaller and larger wrists. Metal bracelet versions may offer extra length for larger wrists.
- Readability: The digital display is clear and easy to read, even when tilted.
Figure 7.1: Authenticity check displaying 'CASIO'
8. Frequently Asked Questions (FAQ)
- Q: Is this watch original?
- A: Yes, the product is genuine Casio. You can perform an authenticity check by pressing and holding the 'Start/Stop' button (B) in Timekeeping Mode; the display should show "CASIO".
- Q: Can I swim with this watch?
- A: The watch has a 50-meter (5 Bar) water resistance rating, making it suitable for swimming in shallow depths. However, avoid operating the buttons while the watch is wet or submerged, and it is not recommended for diving or snorkeling.
- Q: Is the case made of steel or plastic?
- A: The case material is Resin (a type of durable plastic). Some variations may come with a metal bracelet, but the watch case itself is resin.
9. Warranty and Support
For detailed warranty information, please refer to the official Casio warranty documentation provided with your purchase. For further assistance or inquiries, please contact Casio customer support.
A comprehensive user manual in PDF format is available for download: