1. Introduction
Thank you for choosing the CETANT LED Wall Lamp. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new lighting fixture. Please read this manual thoroughly before installation and keep it for future reference.
2. Safety Information & Installation Requirements
WARNING: To avoid electric shock, always cut off the power supply before installation or maintenance.
- Check all parts and accessories of the lamp for damage before installation. Do not install if any parts are damaged.
- Ensure the main power supply is turned off or the main circuit breaker is closed before commencing installation.
- Do not install or operate the lamp in flammable or humid environments.
- Installation should be performed by a qualified electrician or in accordance with local electrical codes.
- Operating voltage: 85V-265V AC. Ensure your electrical system matches this requirement.
3. Package Contents
Please verify that all components are present and undamaged:
- LED Wall Lamp fixture
- Mounting hardware (screws, wall anchors)
- Connector for wiring
- Remote Control (for models with 'Remote Control' option)
- User Manual (this document)
4. Specifications
The CETANT LED Wall Lamp is available in various sizes and configurations:
| Feature | Description |
|---|---|
| Brand Name | CETANT |
| Model Number | PL230 (SWLX018) |
| Material | Aluminum, Silicone |
| Body Material | Aluminum |
| Light Source | LED bulbs (Included) |
| Luminous Flux | 249-2000 lumens |
| Power Source | AC |
| Voltage | 85V-265V (110V, 220V compatible) |
| Installation Type | Wall Mounted, self-contained |
| Shade Direction | Up & Down |
| Base Type | Wedge |
| Features | No flicker, antiglare, Smart Device (for RC models) |
| Is Dimmable | Yes (for RC models) |
| Certification | CCC, CE, PSE, ROHS |
| Warranty | 2 years |
Size and Power Variants:
| Size (W*H) | Chassis | Power Source | Material | Lighting Area |
|---|---|---|---|---|
| W13*H100cm | 40cm | 18W | Aluminum silicone | 10-15m² |
| W10*H80cm | 32cm | 25W | Aluminum silicone | 8-12m² |
| W8*H60cm | 25cm | 13W | Aluminum silicone | 5-10m² |
5. Installation
Follow these steps carefully to install your LED wall lamp:
- Use a screwdriver to secure the lamp's mounting bracket to the panel.
- Determine the desired location for the lamp on the wall, mark the spots where holes need to be drilled.
- Confirm the installation area and drill the marked holes.
- After drilling, insert the rubber plugs (wall anchors) into the holes and gently tap them with a hammer until flush with the wall, if necessary.
- Use a screwdriver to securely fix the mounting bracket to the wall.
- Connect the live wire (L), ground wire (GND), and neutral wire (N) from your electrical supply to the corresponding terminals on the lamp's connector. Ensure connections are secure.
- After wiring, cut off the power supply again and then connect the lamp's cables to the mounting bracket's connector.
- Carefully tighten the screws to fix the lamp body onto the wall bracket. Ensure the lamp is securely fastened.
For a detailed visual guide, please refer to the official user manual PDF mentioned in the 'Warranty & Support' section.
6. Operation
Basic On/Off:
Once installed and powered, the lamp can be turned on and off using your standard wall switch.
Remote Control (for 'Remote Control' models only):
If you have purchased a model with the 'Remote Control' option, your lamp is a smart device and includes a remote for advanced functions:
- Power Button: Press to turn the lamp on or off.
- Brightness Adjustment: Use the '+' and '-' buttons to increase or decrease the light intensity.
- Color Temperature Adjustment: Cycle through different color temperatures (e.g., warm white, cool white, neutral white) or adjust the color temperature gradually.
- Scene Modes: Some remotes may offer pre-set scene modes for different ambiances.
Ensure the remote control has working batteries and is pointed towards the lamp for optimal response.
7. Maintenance
- Cleaning: Disconnect power before cleaning. Use a soft, dry cloth to wipe the lamp body. Do not use abrasive cleaners, solvents, or liquids that could damage the finish or electrical components.
- LEDs: The integrated LED light source is designed for long life and is not user-replaceable. If the LEDs fail, please contact customer support.
- Inspection: Periodically check the lamp for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified technician.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | No power supply; Loose wiring; Faulty switch. | Check circuit breaker and wall switch. Verify all wire connections are secure. Consult an electrician if necessary. |
| Light flickers or is dim. | Unstable power supply; Loose connection; Incorrect dimmer switch (if applicable). | Ensure stable power. Check wiring. If using a dimmer, ensure it is compatible with LED lighting. |
| Remote control not working. | Dead batteries; Remote out of range; Obstruction. | Replace remote batteries. Ensure remote is within range and pointed at the lamp. Remove any obstructions. |
9. User Tips
- For optimal aesthetic appeal, consider the lamp's length relative to your wall space. Longer lamps (100cm, 120cm) are ideal for larger walls or as a central feature, while shorter ones (60cm, 80cm) work well for bedside or smaller accent lighting.
- When installing multiple lamps, ensure consistent spacing and alignment for a harmonious look.
- If you have a 'Remote Control' model, experiment with different brightness and color temperature settings to find the perfect ambiance for various activities or times of day.
10. Warranty & Support
This CETANT LED Wall Lamp comes with a 2-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.
For technical support, troubleshooting assistance, or warranty inquiries, please contact your retailer or the CETANT customer service department.
An official user manual in PDF format is available for download. You can typically find this on the product page or by contacting customer support. The PDF may contain additional diagrams and multi-language instructions.