1. Product Overview
The Tuya WiFi Smart Home Wireless Thermostat is an intelligent digital temperature controller designed for gas boiler and water heating systems. It provides precise room temperature control by comparing ambient temperature with your set preferences, enhancing comfort and promoting energy efficiency. This thermostat features a liquid crystal display (LCD VA color screen), touch keys, and supports wireless communication for flexible placement and smart home integration.
2. Package Contents
Upon unpacking, please ensure all the following components are present:
- Launch Panel (Thermostat Display Unit)
- Receiver Panel
- Signal Line
- Installation Screws
- User Manual (this document and PDF)
3. Setup and Installation
3.1. Power Supply for Launch Panel
The launch panel can be powered by batteries or a USB cable:
- Remove the back clasp of the launch panel.
- Insert three AAA alkaline batteries, ensuring correct positive and negative polarity.
- Close the back cover.
- Alternatively, use a USB Type-C cable to power the device.
3.2. Installation of Receiver Panel
The receiver panel should be installed by a professional electrician. Follow these steps:
- Use a flat-head screwdriver to carefully open the upper and lower covers of the receiver.
- Insert the necessary cables into the terminal connections.
- Tighten the connections securely with a screwdriver.
- Confirm that all connections are firm and nothing is loose.
- Close the back cover.
Note: Ensure the inserted wire does not touch or press the spring mechanism inside the receiver.
3.3. Wiring Instructions (Receiver)
The receiver panel connects to your heating system as follows:
- K1 and K2: Connect to the gas boiler signal line.
- M: Connects to the water pump.
- N: Connects to the Neutral line.
- L: Connects to the Live line.
- NC: Connects to the valve to open.
- NO: Connects to the valve to close.
Safety Tip: Wiring must be performed by professional staff. Live operation is strictly prohibited.
3.4. RF Connection Process
To establish a wireless connection between the launch panel and the receiver:
- Ensure the launch panel is powered (batteries or USB).
- With the launch panel in a shutdown state, long-press the 'F' key for 5 seconds. A signal icon will flash in the lower right corner of the display.
- Power on the receiving panel. Press the signal connection button on the receiver. The green indicator light on the receiver will turn on.
- Press the signal connection button on the receiver again. The green indicator light will flash, indicating it is pairing.
- Once the connection is successful, the wireless icon on the launch panel will stop flashing and remain solid.
The maximum transmission distance between the thermostat (launch panel) and the receiver should not exceed 200 meters.
3.5. Mobile App Setup (Tuya Smart / Smart Life)
To utilize the smart features of your thermostat, download and configure the mobile application:
- Download the App: Search for "Tuya Smart" or "Smart Life" in your mobile app store (Google Play Store or Apple App Store) or scan the QR code below.
- Register an Account: If you are a new user, select "Create New Account." Agree to the privacy policy, enter your mobile number or email, get a verification code, set a password, and complete registration. If you already have an account, simply log in.
- Add Device:
- Click "Add Device" or the "+" icon on the top right of the app homepage.
- Ensure your phone's Bluetooth and location services are enabled for easier device discovery.
- Find the thermostat product (WIFI model) in the device list.
- On the thermostat, long-press the 'F' key for 3 minutes to enter Wi-Fi distribution state (the Wi-Fi icon will flash slowly).
- In the app, confirm that the indicator is flashing slowly, then click "Confirm indicator rapidly blinks" (or similar prompt).
- Select your 2.4 GHz Wi-Fi network and enter the password.
- Click "OK" to initiate the network pairing process.
- Once connected, you can rename the device and select its room location.
Video 1: App Pairing and Settings Demonstration.
4. Operating Instructions
4.1. Display Icon Description
Familiarize yourself with the icons on the thermostat display:
- Sun/Cloud Icon: Weather display
- °F/°C Toggle: Temperature unit conversion
- On/Off Icon: Power status
- Time Display: Current time
- WiFi Icon: WiFi connection status
- Battery Level: Current battery charge
- Heating Icon: Indicates heating is active
- Mode Key: Button for mode selection
- Period Icon: Indicates programmed period
- Room Temperature: Current ambient temperature
- Weekly Display: Day of the week
- Set Temperature: Desired temperature
4.2. Basic Operations
- On/Off: Press the power button to turn the thermostat on or off.
- Mode Switching: Press the mode key to switch between Manual and Automatic modes.
- Temporary Automatic Mode: In Automatic mode, turning the encoder to adjust the temperature will temporarily override the schedule for a set period.
- Time and Date Adjustment: In the startup state, long-press the switch button to adjust the time and date. Use the mode key to switch between parameters and rotate the encoder to adjust values. (Note: If connected to WiFi, time will automatically synchronize with the internet).
- Child Lock: When the child lock is enabled, simultaneously press the Shutdown and Mode keys to enable or disable it.
- WiFi Distribution State: Long-press the 'F' key on the launch panel for 3 minutes to enter the WiFi distribution state.
- Temperature Unit Toggle: Short-press the 'F' key to toggle between Celsius (°C) and Fahrenheit (°F).
4.3. Weekly Programming Mode
To set up a weekly heating schedule:
- Long-press the Mode key to enter Programming Mode.
- Press the Mode key again to switch between different programming periods.
- Rotate the encoder to adjust the time and temperature settings for each period.
- Press the button to exit and save your settings.
Default programming schedule:
| Time Period | Default Time | Temperature |
|---|---|---|
| Working Day 1 | 06:00 | 20°C (68°F) |
| Working Day 2 | 08:00 | 15°C (59°F) |
| Working Day 3 | 11:30 | 15°C (59°F) |
| Working Day 4 | 12:30 | 15°C (59°F) |
| Working Day 5 | 17:00 | 22°C (72°F) |
| Working Day 6 | 22:00 | 15°C (59°F) |
| Day Off 1 | 08:00 | 20°C (68°F) |
| Day Off 2 | 22:00 | 15°C (59°F) |
4.4. Advanced Options Settings
To access advanced settings:
- With the thermostat in the off state, long-press the Mode key to enter Advanced Options.
- Press the Mode key to navigate through the different settings.
- Rotate the encoder to adjust the parameters for each option.
- Press the button to exit and save your Advanced Options.
| No. | Advanced Option Name | Default Value | Option Range |
|---|---|---|---|
| 1 | Temperature Calibration | -2°C | -9 to 9°C |
| 2 | NTC Sensor Selection | IN | 0:IN, 1:OUT, 2:AL |
| 3 | High Temperature Protection | 60°C | 5-60°C |
| 4 | Temperature Difference Starting | 0.5°C | 0.5-5°C |
| 5 | Low Temperature Protection | On | 0:ON, 1:OFF |
| 6 | Weekly Programming | 1 | 01:5+2, 02:6+1, 03:7 |
| 7 | Maximum Set Temperature | 40°C | 30-90°C |
| 8 | Minimum Set Temperature | 10°C | 5-20°C |
| 9 | Factory Recovery | ||
| 10 | Backlight Standby Brightness | 0 | 0-100 |
| 11 | Energy Saving Mode Temperature | 18°C | 5-45°C |
4.5. Voice Control Integration
The thermostat supports voice control through popular smart home assistants:
- Alexa: Integrate with Amazon Alexa for voice commands.
- Google Home: Control your thermostat using Google Assistant.
- Yandex Alice: Compatible with Yandex Alice for voice control.
5. Maintenance
To ensure optimal performance and longevity of your thermostat:
- Regularly clean the exterior of the thermostat with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Check battery levels periodically for the launch panel and replace them when indicated by the low battery icon.
- Ensure the receiver panel's connections remain secure and free from dust or debris.
- Keep the thermostat away from direct sunlight, drafts, or heat sources that could affect its temperature readings.
6. Troubleshooting
If you encounter issues with your thermostat, consider the following common solutions:
- Thermostat not responding: Check the battery level of the launch panel. Ensure the receiver panel has power.
- No heating/cooling: Verify that the thermostat is in the correct mode (Manual/Automatic) and the set temperature is appropriate. Check the wiring connections to the boiler/water pump.
- WiFi connection issues: Ensure your Wi-Fi network is 2.4 GHz. Re-enter the Wi-Fi password in the app. Try re-pairing the device with the app (refer to Section 3.5). Ensure the thermostat is within range of your Wi-Fi router.
- Inaccurate temperature readings: Check for drafts or direct heat sources near the thermostat. Consider adjusting the temperature calibration in Advanced Options (refer to Section 4.4).
- RF signal loss: Ensure the launch panel and receiver are within the 200m transmission range and there are no significant obstructions. Re-establish the RF connection (refer to Section 3.4).
- Child Lock enabled unexpectedly: Simultaneously press the Shutdown and Mode keys to disable the child lock.
If problems persist, consult the detailed user manual PDF or contact customer support.
7. Specifications
7.1. Launch Panel (Thermostat Display Unit)
- Product Dimensions: 118mm x 86mm x 24mm
- Power Supply Mode: 3 alkaline batteries / USB cable (Type-C interface)
- Setting Range: 5℃-60℃
- Operating Environment: 5℃-50℃
- Temperature Control Accuracy: 0.1℃
- Shell Material: Flame retardant PC/ABS V0 grade
- Protection Level: IP20
- Self-consumption Power: 1W
- Transmission Distance: ≤300m (Wireless RF)
- Wireless Frequency: 433MHZ
7.2. Receiver Panel
- Product Dimensions: 86mm x 86mm x 26mm
- Power Supply Mode: AC 90V-240V, 50-60HZ
- Working Environment: 5℃-50℃
- Shell Material: Flame retardant PC/ABS V0 grade
- Protection Level: IP20
- Self-consumption Power: 1W
- Load Current: 3A
- Transmission Distance: ≤300m (Wireless RF)
- Wireless Frequency: 433MHZ
7.3. General
- Certification: CE
- Origin: Mainland China
8. Warranty and Support
For detailed warranty information and customer support, please refer to the official product documentation or contact the seller directly. A comprehensive user manual in PDF format is available for download: