ToolkitRC M6D

Contents

ToolkitRC M6D Dual Channel Smart Charger Discharger User Manual

Model: M6D

1. Introduction

Thank you for purchasing the ToolkitRC M6D multi-function charger. Please read this manual carefully before use to ensure optimal performance and safety.

Key Points

  • Tips: Helpful advice for better usage.
  • Important: Critical information for safety and proper operation.
  • Information: General details about features and functions.

Further Information

To ensure you have the best experience with this product, visit www.toolkitrc.com for news, information, and firmware updates. You can also refer to the official user manual PDF for comprehensive details: User Manual (PDF).

2. Safety Warnings

Please read and adhere to these safety guidelines to prevent damage to the product, batteries, or personal injury.

  1. The M6D allows an input voltage of 7-28V. Ensure that the power supply voltage is within this range. Pay attention to the positive and negative polarities of the power supply when connecting.
  2. Do not use this product in a hot area or near a heat source. Do not use this product in a damp, flammable, or explosive gas environment.
  3. Only use this product while under direct supervision. Do not leave charging batteries unattended.
  4. When not using this product, please unplug the input power promptly.
  5. When using the charging function, please set the current to match the battery. Do not set excessive charging current, as this may damage the battery.

3. Product Overview

The ToolkitRC M6D is a compact, high-power density, dual-channel balanced charger designed for various battery types. It features an innovative design and high charging accuracy.

Key Features:

  • Battery Compatibility: Charge, discharge, and balance management for LiPo, LiHV, LiFe, Lion (1-6S), NiMh (1-16S), and PB (1-10S) batteries.
  • Charging Power:
    • Synchronous mode: Maximum 25A @ 500W
    • Asynchronous mode: Maximum 15A @ 250W
  • Discharge Current:
    • Recycle mode: Maximum 15A @ 250W *2
    • Normal mode: Maximum 3A @ 12W *2
  • Adjustable Cut-off Voltage: Lithium battery cut-off voltage can be set (TVC function).
  • Constant Current/Voltage Output: Customizable 1-28V constant voltage, 1-15A constant current.
  • UAV Battery Adaptation: Can be adapted to mainstream UAV batteries, with automatic activation and charging.
  • Multi-language System: Supports multiple languages and firmware upgrades.
  • USB Output: Provides 2.1A @ 5.0V output for charging mobile devices.
  • Firmware Upgrades: Connects to PC like a USB drive for easy firmware updates by copying and pasting new firmware files.

Product Video

Official promotional video showcasing the ToolkitRC M6D charger's features and design.

4. M6D Layout

Familiarize yourself with the various components and ports of your M6D charger.

ToolkitRC M6D Dual Smart Charger in green and purple

ToolkitRC M6D Dual Smart Charger in green and purple, showing the main display and controls.

Front view of M6D layout with labels

Front view of the M6D charger, highlighting the display, scroll wheel, exit key, CH key, main ports, temp. sensor ports, and balance ports.

Back view of M6D layout with labels

Back view of the M6D charger, showing the input port, USB output & upgrade port, and cooling fan.

5. Quick Start Guide

  1. Connect a 7-28V power supply or input battery to the input port on the back of the M6D.
  2. The display will show the boot logo for 2 seconds.
  3. A 'do-re-mi' boot sound will accompany the startup.
  4. After booting, the display will enter the main interface, showing charging status and battery information.
M6D Main Interface Display

Main interface display showing charging parameters and cell voltages.

  • Short press [Exit]: Switches the cursor between the left and right channels.
  • Press and hold [EXIT]: Starts testing the internal resistance of the corresponding channel. The internal resistance will be displayed after the test.
  • Scroll [Scroll Wheel]: Use to switch between pages in the corresponding channel.
  • Short press [OK]: Selects a charging task when the channel is idle, and can adjust/end work when the channel is active.
  • Press and hold [OK]: Enters the system setting interface when both channels are idle.
  • Press [Exit]: Ends modification or returns to the previous interface.

Key Function Tips:

  • Short press [Scroll Wheel] once to confirm a key function.
  • Press and hold [Scroll Wheel] for 2 seconds to delete a key function.
  • A 'di-di' prompt tone indicates successful key operation.

6. Charge and Discharge Settings

Short press [OK] on the main interface to enter the charging function. The following interface will be displayed:

Battery Selection Menu

Battery selection menu.

6.1. Battery Type

Scroll the [Scroll Wheel] to move the cursor, select a stored battery type, or create a new battery. Press [Enter] to access the battery setting interface.

Battery Type List

List of supported battery types.

The charger supports charging and discharging of 6 types of batteries: LiPo, LiHV, LiFe, Lion, NiMh, and PB. After selecting the battery type that matches your actual battery, short press [OK] and [Exit] to apply the settings and return to the previous interface.

Warning:

  • Choosing the wrong battery type may damage the battery, the charger, and poses a risk of burning. Please choose carefully.
  • Do not use this product to charge batteries that do not indicate their battery type.

Glossary of Battery Terms:

  • LiPo: Lithium polymer battery, nominal voltage 3.70V, fully charged 4.20V.
  • LiHV: High-voltage lithium battery, nominal voltage 3.85V, fully charged 4.35V.
  • LiFe: Iron-lithium battery, nominal voltage 3.30V, fully charged 3.60V.
  • Lion: Lithium-ion battery, nominal voltage 3.60V, fully charged 4.10V.
  • NiMh: Nickel-metal hydride battery, nominal voltage 1.20V.
  • PB: Lead-acid battery, nominal voltage 2.00V.

6.2. Number of Cells

Move the cursor to [Battery cell Number] and press [OK] to modify the number of battery cells.

Cells Selection Menu

Menu for selecting the number of cells.

Turn the [Scroll Wheel] to adjust the value. When set to [Auto], the charger will automatically recognize the number of connected battery cells based on the battery voltage connected to the output port. Short press [OK] and [Exit] to apply settings.

Tips:

  • Over-discharging or over-charging may lead to incorrect recognition of the battery cell number. Manually set the correct cell number if needed.
  • If the cell number is set incorrectly, the battery may not be fully charged or could be damaged by overcharging. Set carefully.
  • For Lixx batteries, connecting to the balance port allows for more accurate cell identification.

6.3. Mode

Move the cursor to [Mode] and press [OK] to modify the working mode.

Mode Selection Menu

Menu for selecting the working mode.

LiPo, LiHV, LiFe, Lion batteries can be charged, discharged, and stored. NiMh batteries can be charged, discharged, or cycled. PB batteries can be charged or discharged. Short press [OK] and [Exit] to apply settings.

6.4. Discharge Mode

When selecting discharge, storage, or cycle mode, the battery setting interface will include discharge mode options.

Discharge Mode Settings

Discharge mode settings interface.

Move the cursor to [Discharge Mode] and press [OK] to modify the discharge mode.

Discharge Mode Options

Options for discharge mode: Internal or Recycle.

The M6D supports two discharge modes:

  1. Internal (Inter) Mode: Discharges through internal heat consumption, supporting a maximum of 3.0A @ 12W.
  2. Recycle Mode: If a suitable battery is connected as input, this function can recover electric energy from the discharging battery to the input battery, supporting a maximum of 15.0A @ 250W discharge.

6.5. Input MaxVoltage

When Recycle discharge mode is selected, the battery setting interface will include the Input MaxVol setting.

Input MaxVol Settings

Input MaxVol setting within the discharge mode interface.

Move the cursor to [Input MaxVol] and press [OK] to adjust. If the input voltage reaches this set voltage during discharge, the discharge will stop.

Tips:

Set the input cut-off voltage within the safe voltage range of the power supply battery. Once the voltage is reached, the charger will automatically stop recycling and discharging. Setting an excessively high over-voltage may damage the input power battery.

6.6. End Voltage (TVC)

Move the cursor to [End Voltage] and press [OK] to modify the end voltage of a single battery cell. When charging, this is the charging cut-off voltage. When discharging, it is the discharge cut-off voltage. Scroll the [Scroll Wheel] to adjust the value in steps of 0.01V.

End Voltage Options

Options for setting the end voltage.

  • Only LiPo, LiHV, LiFe batteries can have the end voltage set.
  • If you are not familiar with battery characteristics, do not modify the cut-off voltage.
  • The charging cut-off voltage can be set within a range of plus or minus 50mV of the full voltage.
  • TVC: Terminal Voltage Control.

6.7. Current Setting

Move the cursor to [Charge Current] or [Discharge Current] and press [OK] to modify the current. Rotate the [Scroll Wheel] to adjust the value in 0.1A steps. Quickly scrolling the [Scroll Wheel] allows for faster increase or decrease. The charger supports up to 15.0A. In synchronous mode, the maximum supported current is 25A.

Charge Current Settings

Interface for setting charge current.

Tips:

  • Set the charging rate to 1-2C according to the battery capacity. For example, for a 2000mAh battery, set the charging current to 2.0-4.0A.
  • Charging and discharging current settings are only valid in their corresponding working modes.

6.8. NiMH Setting (PeakV)

When the battery type is NiMh, you can set the negative pressure value when the battery is fully charged. The range is 5mV-15mV.

NiMh Peak Settings

Interface for setting NiMh Peak voltage.

Tips:

  • Only NiMh batteries can have negative battery voltage set.
  • PeakV: Refers to the voltage drop of each cell when the nickel-metal hydride battery is fully charged.

6.9. Cycle Setting

When the battery type is NiMh and the work mode is set to cycle, the battery setting interface will include options for the number of cycles and rest time.

Cycle Settings

Interface for setting cycle times and rest time.

Move the cursor to [Cycle times] and press [OK] to set the cycle times from 2-12. The charger will follow a pattern of discharging then charging. For example, 'Discharge->Charge' 2 times.

Move the cursor to [Rest time] and press [OK] to set the interval time for cycle charging. The range is 2 to 10 minutes.

Rest Time Options

Options for setting the rest time between cycles.

6.10. Power Mode Setting

When the battery type is 'Power', the battery setting interface only offers output voltage and maximum current options.

Power Mode Settings

Interface for setting output voltage and max current in Power Mode.

Move the cursor to [Output Voltage] and press [OK] to modify. The voltage range is 1V to 28V. Move the cursor to [Max Current] and press [OK] to modify. This sets the maximum current of the output power supply, with a range of 0.5A to 15A.

6.11. Smart Battery

When the battery type is 'Smart Battery', settings are limited to drone type and maximum current.

Smart Battery Settings

Interface for setting drone model and max current for Smart Batteries.

Move the cursor to [Drone model] and press [OK] to select different drone models (e.g., Mavic2, MavicS, Phantom, Inspire). Move the cursor to [Max Current] and press [OK] to set the charging current (range 0.5A to 15A).

6.12. Synchronous Mode

When the synchronization function is enabled in the settings menu, the M6D allows two channels to charge the same battery with a total current of 25A. Connect as shown in the diagram below.

Synchronous Mode Wiring Diagram

Diagram illustrating the connection for synchronous charging mode.

7. Charge and Discharge Operation

When charging and discharging begins, the charger enters the working interface.

Charge/Discharge Work Interface

Working interface displaying real-time charging/discharging data.

Rotate the [Scroll Wheel] on this interface to switch between bottom status information and internal resistance voltage values. Short press [OK] to dynamically set the working current or stop working.

Adjustment Menu during Operation

Adjustment menu for current and stopping work.

To end the charge and discharge work, short press [OK], move the cursor to [Stop working], then short press [OK] again to stop work and return to the main interface.

When charging is completed or an error occurs, a prompt box will appear, and a tone will sound.

Display Content Description:

  • 24.00V: Input power supply voltage
  • 9A: Input power current
  • 20.0Wh: Total power consumption of input power
  • 45.0°C: Charger internal temperature.
  • Constant pressure sign: Indicates constant current.
  • Current limit sign: Indicates power or input overcurrent.
  • Maximum current: Activates charging.
  • Main port full voltage or single chip full voltage: Indicates charging status.

Scroll [Scroll Wheel] to switch to the second column of the second channel for internal resistance information.

Internal Resistance Information Display

Display showing internal resistance values for each cell.

Scroll [Scroll Wheel] again to switch to the third column of the second channel, which is the information bar.

Information Bar Display

Information bar displaying charge status, battery type, end voltage, and charging current.

Tips:

  • Always supervise charging and discharging to address any abnormalities promptly. Do not leave batteries unattended.
  • When charging/discharging lithium batteries, connecting only to the main port will not perform balance management. Always connect the balance lead for proper balancing.
  • After charging, unplug the battery and connect a new one. The device will automatically continue charging/discharging according to the set mode (if continuous work mode is selected). Ensure the new battery matches the settings or verify auto-detected cell count.

8. System Settings

After long-pressing [OK] on the main interface (when both channels are idle), you can enter the system setting interface.

System Settings Menu

Main system settings menu.

8.1. Input Power Settings

Enter the relevant settings for the power supply. Long-press to select power supply 1, 2, or 3. Short press to expand settings.

Input Power Settings Details

Detailed input power settings.

  • Power type: Battery and adapter (PSU). Battery can be used to recover energy (Recycle mode). Recycle mode cannot be used with a Power Supply Unit (PSU) or mains power adapter.
  • Max power: Maximum power absorbed from the input port when charging.
  • Max current: Maximum current drawn from the input port during charging.
  • Voltage range: Allowable input voltage range.

8.2. Charging Security Settings

Short press to expand settings.

Charging Security Settings Details

Detailed charging security settings.

  • Safe Inter. Temp.: Device stops main port output if internal temperature exceeds this value.
  • Safe Exter. Temp.: Device stops main port output if external sensor detects temperature higher than this value.
  • Safe time: Maximum continuous charge/discharge time, after which operation stops.
  • Safe capacity: Maximum continuous charge/discharge capacity, after which operation stops.

8.3. Other System Settings

Other System Settings

Menu for continuous work, work completed, backlight, buzzer, language, and default settings.

  • Synchronization mode: Can be enabled or disabled. When enabled, both channels work synchronously for more power.
  • Continuous work: When selected, the charger automatically continues with the same charging settings on the next connected battery. Ensure the next battery requires the same settings.
  • Work completed: Sets whether to stop or trickle charge after completion.
  • Backlight: Adjusts backlight brightness from 1 to 10 levels.
  • Buzzer: Sets the tone of the buzzer (can be turned off).
  • Language: Selects the system display language (English, Chinese, etc.).
  • Default: Restores all settings to factory defaults.

9. Other Functions

9.1. Firmware Upgrade

Connect the M6D to your computer using the USB cable provided. The computer will recognize a USB disk named 'Toolkit'. Download the upgrade file (app.upg) from the official website, then copy and paste it to overwrite the existing files on the USB disk. The firmware will then be upgraded.

9.2. USB 5.0V Output

The USB interface can output 2.0A current at 5.0V to charge mobile devices, in addition to its firmware upgrade function.

9.3. Automatically Continue to Charge and Discharge

When a battery is fully charged, unplug it for 2 seconds, then connect the next battery. The device will automatically continue to charge and discharge. This function can be enabled or disabled in the 'Continuous work mode' menu.

9.4. Fan Level

  • If the internal temperature exceeds 45°C, the fan will operate at half-speed to reduce noise.
  • If the internal temperature exceeds 53°C, the fan will operate at full-speed to enhance heat dissipation.

9.5. Manual Voltage Calibration

In the shutdown state, press and hold the [Scroll Wheel] while connecting the power supply. The system will enter the manual calibration voltage function. Measure the actual voltage of each battery with a voltmeter, then move the cursor to the corresponding voltage value and modify it to match the voltmeter reading for calibration. After calibration, move the cursor to 'save', short press once (a beep will confirm), and then log out or shut down.

9.6. Fully Charged Behavior

When a lithium battery is charged, the display will prompt "Fast charging has ended". If the battery is not removed, constant voltage trickle charging will automatically be performed to ensure the battery is more fully charged.

10. Specifications

FeatureSpecification
Input Voltage7-28V @ MAX 30A
Battery TypeLiPo, LiHV, LiFe, Lion (1-6S)
NiMh (1-16S)
Pb (1-10S)
Balance Current800mA @ 2-6S
Balance Accuracy<0.005V
Charging Power (Asynchronous)0.1-15A @ 250W *2
Charging Power (Synchronous)0.1-25A @ 500W
Discharging Power (Recycle Mode)0.1-15A @ 250W *2
Discharging Power (Normal Mode)0.1-3A @ 12W *2
USB Output2.1A @ 5V (upgrade @ USB3.0)
Battery Voltage Range1.0V-5.0V @ 1-6S
Battery Internal Resistance1-100mR @ 1-6S
DisplayIPS 2.4 inch 320*240 resolution LCD
Product Size98mm * 68mm * 35mm
Product Weight220g
Individual Packing Size108.5mm * 80.5mm * 46mm
Individual Packing Weight300g

11. User Tips

  • The included USB cable is for connecting to a PC for firmware updates, not for powering the charger. A separate power transformer is needed for operation.
  • Some users have reported receiving version 3.14, indicating that a v3 variant of this model is available.
  • While the charger works perfectly out of the box, a small voltage calibration might be beneficial for maximum precision, though discrepancies are typically small.
  • The compact size makes it practical for various setups.

12. Warranty and Support

For detailed warranty information, troubleshooting guides, and customer support, please refer to the official ToolkitRC website (www.toolkitrc.com) or the comprehensive user manual PDF provided.

© ToolkitRC 2020. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.