1. Safety Information
READ ALL SAFETY INFORMATION AND INSTALLATION INSTRUCTIONS BEFORE YOU BEGIN INSTALLING THE FAN.
- To reduce the risk of electric shock, ensure the electricity has been turned off at the circuit breaker or fuse box before you begin.
- All wiring must be in accordance with the National Electrical Code ANSI/NFPA 70-1999 and local electrical codes. Electrical installation should be performed by a qualified licensed electrician.
- The outlet box and support structure must be securely mounted and capable of reliably supporting 35 lbs. (15.9 kg). Use only UL Listed outlet boxes marked "Acceptable for Fan Support of 35 lbs. (15.9 kg) or less".
- The fan must be mounted with a minimum of 7 ft. (2.1 m) clearance from the trailing edge of the blades to the floor.
- Do not operate the reversing switch while the fan blades are in motion. You must turn the fan off and stop the blades before you reverse the blade direction.
- Do not place objects in the path of the blades.
- To avoid personal injury or damage to the fan and other items, use caution when working around or cleaning the fan.
- Electrical diagrams are for reference only. Light kits that are not packed with the fan must be UL-listed and marked suitable for use with the model fan you are installing. Switches must be UL General Use Switches. Refer to the instructions packaged with the light kits and switches for proper assembly.
- After making electrical connections, spliced conductors should be turned upward and pushed carefully up into the outlet box. The wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box.
- All setscrews must be checked and re-tightened where necessary before installation.
WARNING: To reduce the risk of personal injury, do not bend the blade brackets (also referred to as flanges) during assembly or after installation. Do not insert objects in the path of the blades.
WARNING: To reduce the risk of fire or electric shock, this fan is NOT suitable for use with solid-state speed controls.
WARNING: To avoid possible electrical shock, make sure that the electricity is turned off at the main power box before starting work. If you feel you do not have enough electrical wiring knowledge or experience, contact a licensed electrician.
WARNING: Electrical diagrams are for reference only. Optional use of any light kit shall be UL-listed and marked suitable for use with this fan.
WARNING: To reduce the risk of fire, electrical shock or personal injury, ensure that the fan mounting bracket is supported directly from the building structure or the outlet box marked "Acceptable for Fan Support of 35 lbs. (15.9 kg) or less". Use only the screws provided with the outlet box.
2. Pre-installation
2.1. Tools Required
- Phillips screwdriver
- Flat blade screwdriver
- Step ladder
- Drill
- Wrench
- Wire-stripping Pliers
- Electrical Tape
2.2. Hardware Included
Note: Hardware not shown to actual size.
| Item | Description | Quantity |
|---|---|---|
| AA | Tapping Screws | 2 |
| BB | Expansion Bolts | 4 |
2.3. Package Contents
| Item | Description | Quantity |
|---|---|---|
| A | Fan-motor assembly | 1 |
| B | Pin cover | 1 |
| C | Hanging panel | 1 |
| D | Remote control unit | 1 |
| E | Controller | 1 |
| F | Installation instruction | 1 |

Fan-motor assembly

Pin cover

Hanging panel

Remote control unit

Controller

Installation instruction manual cover
3. Installation
3.1. Mounting Hanger (Hanging Part)
Fasten the circular hanging plate to the ceiling using screws provided:
For wooden ceiling:
Start by drilling a pilot hole in the ceiling using a power drill. Then attach the mounting plate using 4 wood screws.

Mounting plate secured with wood screws to a wooden ceiling.
For concrete ceiling:
Use a hammer drill and a suitable carbide drill bit to create a hole in the base material. After clearing out any debris, insert the 4 expansion screws and tighten them using a wrench.

Mounting plate secured with expansion screws to a concrete ceiling.
3.2. Hanging the Fan and Wiring
1. Connect the wire from the ceiling fan into the receiver.
2. Connect the wire from the receiver with the wire from the house.
The controller of the light source and the motor terminal should be connected respectively. Ensure good connection and secure the electricity cable connection at the top.
The fan-motor assembly will be fixed at the top of the motor department's well hole using screws. Ensure stability by screwing the top base firmly.

Wiring diagram showing connections from house to receiver and receiver to ceiling fan. Brown and Blue wires for DC IN L and DC IN N respectively.
4. Operation
4.1. Remote Control
The remote control uses 2.4G wireless digital remote control technology, providing one-to-one control, simple operation, and strong anti-interference ability. The remote control must match the same code to receive commands.

Remote control unit with labeled buttons.
Remote Control Functions:
- NO/OFF: Power on/off.
- Wind speed 1-6 gear: Adjust fan speed.
- Increased brightness: Increase light intensity.
- Reduced brightness: Decrease light intensity.
- Fan forward/reverse switch: Change fan rotation direction.
- General (turn off all functions): Turn off both fan and light.
- Turn off the fanCode: Disconnect remote from fan.
- Increased color temperature: Adjust light color to cooler tones.
- Lower color temperature: Adjust light color to warmer tones.
- Natural Wind: Simulate natural breeze.
- 2-hour time: Set a 2-hour timer.
- Night light: Activate night light mode.
Remote Control Matching Code:
Use only when the remote control cannot control the lamp. Turn on the power and press and hold the STOP key within 5 seconds of the light turning on. When you hear a sound or see the light flash, the code match is successful. If you need to match the code a second time, you may need to wait 30 seconds before turning on the power and repeating the operation.
4.2. APP Control
The fan can also be controlled via a mobile application.
- Step 1: Scan the QR Code below to download and install the app on your phone.
- Step 2: Turn on the light and search for the light in the app. Pair them.
- To pair, turn on the light and press the pairing button in the app immediately. The pairing will be done.

Scan to download the control APP.

APP interface showing light and fan controls, including color temperature adjustment.
5. Care and Cleaning
WARNING: Make sure the power is off before cleaning your fan.
- Because of the fan's natural movement, some connections may become loose. Check the support connections, brackets, and blade attachments twice a year. Make sure they are secure. It is not necessary to remove the fan from the ceiling.
- Clean your fan periodically to help maintain its new appearance over the years. Do not use water when cleaning, as this could damage the motor, or the wood, or possibly cause an electrical shock. Use only a soft brush or lint-free cloth to avoid scratching the finish. The plating is sealed with a lacquer to minimize discoloration or tarnishing.
- You can apply a light coat of furniture polish to the wood for additional protection and enhanced beauty. Cover small scratches with a light application of shoe polish.
- You do not need to oil your fan. The motor has permanently-lubricated sealed ball bearings.
6. Troubleshooting
| Problem | Solution |
|---|---|
| The fan will not start |
|
| The fan is noisy |
|
| Remote control communication lost |
|
7. Specifications

Diagram showing dimensions and key specifications for the 42-inch model.
| Feature | Specification |
|---|---|
| Brand Name | IRALAN |
| Item Type | Ceiling Fans |
| Model | Invisible Ceiling Fan with LED Light |
| Available Sizes | 42inch (105x105x24CM), 48inch |
| Power (42inch model) | 78W (LED: 38W, Motor: <30W) |
| Luminous Flux (42inch model) | 6950LM |
| Luminous Flux Range | 2000-82000 |
| Color Rendering Index | Ra>98 |
| CCT | Stepless dimming |
| Lighting Mode | Side Light |
| Light Source | LED (Bulbs not included, integrated LED) |
| Is Dimmable | Yes |
| Control Method | Remote Control + APP |
| Switch Type | REMOTE CONTROL |
| Input Voltage | 85-265V AC (100-240V for specific components) |
| Power Source | AC |
| Motor Type | DC Brushless Motor |
| Wind Speeds | 6 speeds |
| Rotating Speed | 160-230r/min |
| Sound Level | 30dB (Quiet for Sleep) |
| Number of Blades | 4 (Invisible) |
| Reversible | Yes |
| Fan Timing | 2H |
| Body Material | ABS, Copper, IRON, PMMA |
| Installation Method | Assembly |
| Application Space | 10-20M² |
| Application Scenario | Dining room/bedroom/room |
| Certification | CE |
| Warranty | 2 years |
| Remote Control Battery Type | AAA*2 |
| Valid Remote Distance | 8-20 meters (15M stated in manual) |
| Product Origin | Mainland China |
| Package Weight | 5.237 kg |
| Package Dimensions | 57cm (L) x 50cm (W) x 13cm (H) |

Product overview highlighting input voltage (85-265V) and low sound level (30dB).

Detailed view of the TurboSilent DC Brushless Motor, offering higher performance and 6 wind speeds.

Diagram illustrating airflow and confirming suitability for low-floor installations.

Examples of the fan light in different settings: Bedroom, Study Room, Night Light mode, and Daylight mode.
8. User Tips
- The included wire rope is very helpful for installation, providing extra safety and ease during mounting.
- Despite its weight, the fan operates quietly, especially suitable for smaller rooms.
- The LED lights are bright and offer three distinct types (color temperatures) that can be controlled independently.
- The fan features 1-6 speed settings and maintains quiet operation across speeds.
- The fan blades are designed to fold and unfold, which is a convenient feature.
- Be aware that leveling the fan during installation can be tricky.
- Before installation, carefully check your ceiling structure and appliance mounts to ensure they can support the fan's weight.
9. Warranty and Support
9.1. Warranty Information
To obtain warranty service, you must present a copy of the receipt as proof of purchase. All costs of removing and re-installing the product are your responsibility. Damage to any part such as by accident, misuse, improper installation, or by affixing any accessories, is not covered by this warranty.
Due to varying climatic conditions, this warranty does not cover any changes in brass finish, including rusting, pitting, corroding, tarnishing, or peeling. Brass finishes of this type give their longest useful life when protected from varying weather conditions. A certain amount of "wobble" is normal and should not be considered a defect.
Servicing performed by unauthorized persons shall render the warranty invalid. There is no other express warranty. The manufacturer hereby disclaims any and all warranties, including but not limited to those of merchantability and fitness for a particular purpose to the extent permitted by law. The duration of any implied warranty which cannot be disclaimed is limited to the time period as specified in the express warranty. Some states do not allow a limitation on how long an implied warranty lasts, so the above limitation may not apply to you.
The retailer shall not be liable for incidental, consequential, or special damages arising out of or in connection with product use or performance except as may otherwise be accorded by law. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion or limitation may not apply to you. This warranty gives specific legal rights, and you may also have other rights which vary from state to state. This warranty supersedes all prior warranties. Shipping costs for any return of product as part of a claim on the warranty must be paid by the customer.
9.2. After-sales Support
For after-sales inquiries or support, please contact us via email:
After-sales email: sxdsltd@163.com
A detailed user manual is also available in PDF format for download: User manual (PDF)
10. Frequently Asked Questions (FAQ)
- Q: Is the light intensity adjustable?
- A: Yes, the light features stepless dimming, allowing you to adjust the brightness to your preference.
- Q: How many lumens does the light have?
- A: The 42-inch model has a luminous flux of 6950LM. The range for all models is 2000-82000LM.
- Q: How many blades does the fan have?
- A: The fan has 4 invisible blades.
- Q: What is the weight of the product? Is it suitable for mounting on a plaster ceiling?
- A: The package weight is 5.237 kg. While the exact product weight is not specified, users have noted it is heavier than expected. For plaster ceilings, it is crucial to ensure the ceiling structure and mounting points can securely support at least 35 lbs (15.9 kg) as per safety guidelines.
- Q: My remote control is not communicating with the fan/light. What should I do?
- A: Try re-matching the remote control code. Turn on the power to the fan, then immediately press and hold the 'STOP' button on the remote control within 5 seconds. The light should flash or make a sound to indicate successful pairing. If it doesn't work, turn off the power, wait 30 seconds, and try again.