Tuya TRV WiFi Zigbee Thermostatic Head

Contents

Tuya TRV WiFi Zigbee Smart Thermostatic Radiator Valve User Manual

Model: TRV WiFi Zigbee Thermostatic Head

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Tuya TRV WiFi Zigbee Smart Thermostatic Radiator Valve. This product is designed to control water heating systems, offering smart temperature management for enhanced comfort and energy efficiency.

Tuya TRV WiFi Zigbee Thermostat main product image showing compatibility with WiFi, Zigbee, Tuya, Google Assistant, and Amazon Alexa.
Tuya TRV WiFi Zigbee Thermostat: Smart control for your heating system.

2. Safety Instructions

  • This product is for controlling water heating systems only.
  • Avoid high temperatures and humidity for the battery.
  • If you notice unusual issues like overheating, leaks, or strange smells, stop using it immediately and contact a professional.
  • Do not disassemble or attempt repairs yourself.
  • Our products comply with CE conformity (RED, LVD, EMC) and RoHS conformity.

3. Technical Specifications

FeatureSpecification
Model NumberWiFi/Zigbee Thermostatic Head
Power3*1.5V LR6 alkaline AA batteries
Standby CurrentMin
Operating Temperature0-50°C (for indoor use only)
Storage Temperature20-70°C
Communication ProtocolIEEE 802.15.4, Tuya Zigbee 3.0
Radio Frequency Range2.400GHz-2.4835GHz
Temperature SensorNTC 8-3380, R25-10KD1%
Protection IntervalP20
Surface Temperature90°C Max (at the radiator)
ConnectionM30 x 1.5 mm
CompatibilityCompatible with most radiators available on the market.
Dimensions (WxHxD)59.7 mm x 95.3 mm x 59.7 mm
Weight145 g
CertificationCE, RoHS, WEEE
OriginMainland China

4. Setup and Installation

Follow these steps to install and set up your Smart Thermostatic Radiator Valve.

Video: Quick Start Guide for Smart Thermostat Radiator Valve Installation and App Setup.

4.1. Package Contents

  • Smart Thermostatic Radiator Valve
  • Adapter Set (for Danfoss RA, Danfoss RAV, Danfoss RAVL, Giacomini, Caleffi, M28 valves)
  • User Manual (PDF available online)

4.2. Install/Replace Batteries

  1. Press the battery compartment latch and lift the cover upwards to remove the battery cover.
  2. Insert 3 new 1.5V LR6 alkaline AA batteries into the battery compartment.
  3. After installing the battery, the device displays the temperature. Press the "Set Button" briefly to adjust the screen to the appropriate direction.
  4. Reattach the battery compartment cover and latch it into place.

Important Note: This product must use LR alkaline batteries. It is recommended to choose new, high-quality batteries and regularly check the battery level to ensure it meets temperature control needs. When the TRV or app shows a low battery, please replace the batteries as soon as possible.

Diagram showing how to remove and insert batteries for low battery alert.
Battery installation and low battery alert indication.

4.3. Install Adapter (if needed)

First, check if your valve interface is M30 x 1.5 mm. If it is, you can directly install the product on the valve. If your valve interface is not M30 x 1.5 mm, you need to mount an adapter on the valve.

Installation steps:

  1. Check your valve's connector type.
  2. Choose the correct adapter from the provided set (for Danfoss RA, Danfoss RAV, Danfoss RAVL, Giacomini, Caleffi, M28 valves).
  3. Firmly screw the adapter onto the valve and make sure it's properly secured for correct operation.

4.4. Install Thermostat

  1. Please wait for the "05" animation to complete. When you see the animation loading, it indicates that the device is initializing.
  2. After the loading animation ends, use the valve nut to attach the device to the radiator.
  3. Once the device is attached to the radiator, press the "Mode Button" quickly, and the screen will display "00L", which means the device is adapting to the valve.
  4. When the device adaptation is successful, the screen will display the initialized screen (current temperature).

Important: The valve must be installed, otherwise an F5 error code will be displayed.

4.5. Initialize Product

Short press the Mode button. Wait for initialization to finish, indicated by temperature display.

4.6. Network Configuration (for App Control)

This thermostat requires a Tuya Zigbee gateway to operate (for Zigbee versions). Please set up the gateway before connecting this device. Ensure that Bluetooth and Wi-Fi are enabled on your smartphone and that the Smart Life app has permission to access Bluetooth functionality.

Image of a Multi-mode Gateway (Zigbee Bluetooth) with a USB cable.
Multi-mode Gateway (Zigbee Bluetooth) for network connectivity.

4.6.1. Download the Smart Life App

Scan the QR code below or search for "Smart Life" in the App Store or Google Play to install the Smart Life app and sign in to your account.

QR code for Smart Life app download and illustration of app remote control.

4.6.2. Add Gateway (for Zigbee version)

  1. Power on the Zigbee gateway device.
  2. Press and hold the button for 5 seconds until the red light starts flashing. The device enters Wi-Fi setup mode.
  3. Open the app's "Home" interface, click on "+" in the upper right corner and select "Gateway Control Wireless Gateway (Zigbee)".
  4. Select your 2.4 GHz Wi-Fi network and enter the password, then click "Next".
  5. Wait for the device to be successfully added, then click "Done" to complete the installation.

4.6.3. Add Device (Thermostat)

  1. Enter Network Configuration Mode: In custom mode, press and hold the "Minus Button" until the screen displays "OFF". Then, press and hold the "Mode Button" for a minimum of 3 seconds. When a circular animation begins on the display, the device has successfully entered network configuration mode.
  2. Scan Device in App: Open the app's "Home" screen, tap the "+" icon, select "Add Device", and scroll to the bottom. Tap "Other", then "Other Devices (Zigbee)", and select your gateway.
  3. Select "Confirm Indicator Light is Flashing" and tap "Next". The system will connect to the device.
  4. Wait for the device to be added successfully, then tap "Done" to complete the installation.
App remote control interface showing WiFi and Zigbee versions and temperature settings.
App interface for remote control and device scanning.

5. Operating Instructions

5.1. App Features Overview

The Smart Life app provides a streamlined interface for managing your thermostat. It includes sections for mode and state, temperature setting, statistics data, and more settings.

App interface showing upgraded timer function and device status.
App interface for timer function and device status.

5.2. Main Functions

  1. Temperature Setting: Press the "Plus Button" or "Minus Button" on the device or in the app to adjust the temperature in 0.5°C increments.
  2. Temperature Control Mode: Short press the "Mode Button" to switch between four standard modes and programming mode.
    • Comfort Mode (Default: 20°C): Ensures ideal indoor temperature by maintaining the pre-set comfort temperature.
    • ECO Mode (Default: 15°C): Energy-saving feature that maintains basic indoor comfort while saving energy.
    • OFF Mode: Closes the valve when heating is not required. Can be set by pressing the "Minus Button" until "OFF" appears or by cycling through modes with the "Mode Button".
    • Frost Protection Function: If activated in software settings, the device automatically enables frost protection (valve opens below 5°C, closes above 7°C) even in OFF mode to prevent freezing.
    • Programming Mode: Configure temperature schedules via the dedicated mobile app. Set up to 6 programs daily with 4 mode options (Comfort, ECO, Frost Protection, Custom).
    • Custom Mode: When "C" is displayed, the temperature is controlled according to the value set using the button. It remains active until the next manual change.
    • Vacation Mode: Specify duration in programming mode. The device will maintain a slightly below comfort temperature (antifreeze mode) to prevent excessive heating. After the duration, it switches back to the previous mode. Activated in the app, indicated by "V" and "Z" on screen.
    • Boost Mode: Activated in the app during vacation or programming mode by setting a duration. The device switches to boost mode and then returns to the previous setting. Indicated by "BOOST" on screen.
  3. Screen Display Rotation: Tap the "Set Button" on the device to change the screen orientation.
  4. Child Lock Function: Lock the device operation to prevent unintentional setting changes. To activate/deactivate, press and hold the "Mode Button" for 3 seconds. "CL" will appear/disappear on the screen.
  5. Window Opening Detection: If the room temperature drops over 1.5°C in 5 minutes while heating, the device activates window detection and stops heating for 30 minutes. Status shown on screen. Detection can be cancelled by setting temperature/changing mode in app/device, or if temperature rises by more than 1.5°C within 4.5 minutes.
  6. Anti-Limescale Protection: The device turns on automatically every Monday at 12:00 p.m. for maintenance to prevent valve calcification. During this time, "CAL" is displayed on the screen.
  7. Power Failure Memory Function: The device maintains the current working mode and resumes the previous mode when it is turned back on after a power failure.

5.3. System Mode (For App Use Only)

System modes determine how the device controls and regulates the heating process.

  • ON-OFF Mode: The valve operates in a fully open (100%) or fully closed (0%) manner. When heating is activated, the valve opens completely; when heating is turned off, the valve closes completely.
  • PID Mode: The valve continuously adjusts its opening percentage. This gradual adjustment helps align the actual heating temperature with the desired target temperature, maintaining a comfortable room temperature with minimal fluctuations.

Attention: PID mode typically consumes more energy than ON-OFF mode. Please select the system mode that best suits your needs. Frequent switching between system modes may negatively impact device performance, therefore it is recommended to operate it with caution.

5.4. Calibration (For App Use Only)

The temperature calibration function allows users to adjust the device's temperature measurements to ensure accurate readings.

How to Calibrate:

  1. In the app, navigate to Settings > Temperature > Calibration.
  2. Adjust the device's temperature readings as needed to meet your requirements.
  3. Save the settings to complete the calibration process.

5.5. Switching Hysteresis (For App Use Only)

Range: 0.5-5°C. The switching hysteresis function reduces frequent switching by allowing downward deviation.

Attention: The switching hysteresis setting can only be adjusted in ON-OFF mode. For example, with a target temperature set to 25°C and a hysteresis of 0.5°C, the device will activate heating at 24.5°C and deactivate at 25°C.

5.6. Voice Control

The device is compatible with Amazon Alexa and Google Home. Here are some example voice commands:

  • Amazon Alexa: "Alexa, turn on [SCENE NAME]", "Alexa, set the [DEVICE NAME] to auto", "Alexa, set the [DEVICE NAME] to off", "Alexa, set the [DEVICE NAME] to 26 degrees", "Alexa, drop the [DEVICE NAME] by 1 degree", "Alexa, raise the [DEVICE NAME] by 1 degree", "Alexa, what is the temperature of [DEVICE NAME] set to?", "Alexa, what is the target temperature of the [DEVICE NAME]?", "Alexa, what percentage charge does my [DEVICE NAME] have?"
  • Google Home: "Hey Google, turn on [SCENE NAME]", "Hey Google, set the [DEVICE NAME] to auto", "Hey Google, set the [DEVICE NAME] to off", "Hey Google, set the [DEVICE NAME] to 28 degrees", "Hey Google, decrease [DEVICE NAME] temperature", "Hey Google, increase [DEVICE NAME] temperature", "Hey Google, what is battery on the [DEVICE NAME]?"

Attention: "SCENE NAME" is the scene name and "DEVICE NAME" is the default device name; both can be customized. Please ensure the temperature units are consistent between the device and smart speaker.

6. Maintenance

  • Battery Replacement: When the low battery alert appears (indicator light stays on if charge drops below 20%), replace the three 1.5V LR6 alkaline AA batteries immediately.
  • Anti-Limescale Protection: The device automatically performs maintenance every Monday at 12:00 p.m. to prevent valve calcification. No user action is required for this feature.

7. Troubleshooting

Error CodeProblemSolution
E1Temperature Sensor ErrorContact customer service staff.
E2Valve Response DelayCheck the installation and heating valve.
F3Insufficient Valve TravelCheck the heating valve.
F4Battery DepletedReplace batteries immediately.
F5Valve Detection FailedCheck whether the valve is installed correctly. If the F5 error persists, please contact the retailer for technical support.
F6Excessive Valve TravelCheck the fastening of the valve.
F7Battery Quality IssueThe batteries are of poor quality and not enough to power the motor. Replace batteries immediately.

8. User Tips

  • Wi-Fi Connectivity with FRITZ!Box: Some users have reported Wi-Fi connectivity issues with modern FRITZ!Boxes (e.g., FRITZ!Box 6690), where the device may regularly lose connection. A reliable solution is to use a small, affordable 2.4 GHz access point (e.g., TP-Link TL-WR802N, WPA2) between the FRITZ!Box and the thermostat. This can ensure stable operation without connection drops.
  • Ensure you use new, high-quality alkaline AA batteries for optimal performance and battery life.
  • The product is generally easy to connect and works well once settings are figured out.

9. Warranty and Support

For detailed warranty information and further technical support, please refer to the official product documentation available as a PDF. You can access the user manual PDF at: User Manual (PDF).

For any issues not covered in this manual, please contact the seller or manufacturer's customer support.

© 2024 Tuya. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.