Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Smart Tuya WiFi/Zigbee TRV Thermostatic Head Radiator Valve Actuator. This device is designed to enhance your home heating system by offering smart, room-by-room temperature control, compatible with popular smart home platforms like Amazon Alexa, Google Assistant, and Alice.
The TRV supports 4 standard modes and up to 6 programs for 7 days a week, allowing for personalized heating schedules and energy efficiency.
Safety Instructions
- This product is for controlling water heating systems only.
- Avoid high temperatures and humidity for the battery.
- If you notice unusual issues like overheating, leaks, or strange smells, stop using it immediately and contact a professional.
- Do not disassemble or attempt repairs yourself.
- Our products comply with CE conformity (RED, LVD, EMC) and RoHS conformity.
Package Contents
Please check that all items are present:
- Smart Tuya WiFi/Zigbee TRV Thermostatic Head Radiator Valve Actuator
- Adapter Set (for Danfoss RA, Danfoss RAV, Giacomini, Caleffi, M28 valves)
- User Manual (PDF available online)
Technical Specifications
| Feature | Specification |
|---|---|
| Model Number | WiFi/Zigbee Thermostatic Head |
| Power | 3x 1.5V Alkaline AA batteries |
| Standby current | 6 μA Min |
| Operating temperature | 0-50°C (indoor use only) |
| Storage temperature | 20-70°C |
| Communication Protocol | IEEE 802.15.4, Tuya Zigbee 3.0 |
| Radio frequency range | 2.400GHz-2.4835GHz |
| Temperature sensor | NTC 8-3380, R25-10KD1% |
| Surface temperature | 90°C Max (at the radiator) |
| Connection | M30 x 1.5 mm |
| Dimensions (WxHxD) | 59.7 mm x 95.3 mm x 59.7 mm |
| Weight | 145 g |
| Certification | CE, RoHS, WEEE |
Setup Guide
Device Overview
Step 1: Install/Replace Batteries
Important Note: This product must use LR alkaline batteries. It is recommended to choose new, high-quality batteries and regularly check the battery level to ensure it meets temperature control needs. When the TRV or app shows a low battery, please replace the batteries as soon as possible.
- Press the battery compartment latch and lift the cover upwards to remove the battery cover.
- Insert 3 new LR6 AA batteries into the battery compartment and press them down.
- After installing the battery, the device displays. Press the "Set Button" briefly to adjust the screen to the appropriate direction.
- Reattach the battery compartment cover and latch it into place.
Step 2: Install Adapter (if needed)
First, check if your valve interface is M30 x 1.5 mm. If it is, you can directly install the product on the valve. If your valve interface is not M30 x 1.5 mm, you need to mount an adapter on the valve.
- Check your valve's connector type.
- Choose the correct adapter from the provided set.
- Firmly screw the adapter onto the valve and make sure it's properly secured for correct operation.
Step 3: Install Thermostat
- Please wait for the "05" animation to complete. When you see the animation loading, it indicates that the device is initializing.
- After the loading animation ends, use the valve nut to attach the device to the radiator.
- Once the device is attached to the radiator, press the "Mode Button" quickly, and the screen will display "", which means the device is adapting to the valve.
- When the device adaptation is successful, the screen will display the initialized screen.
Important: The valve must be installed, otherwise an F5 error code will be displayed.
App Connection
Step 1: Download the Smart Life App
Scan the QR code below or search for "Smart Life" in the App Store or Google Play to install the Smart Life app and sign in to your account.
Step 2: Add Gateway (for Zigbee version only)
Attention: This thermostat requires a Tuya Zigbee gateway to operate if you have the Zigbee version. Please set up the gateway before connecting this device. Ensure that Bluetooth and Wi-Fi are enabled on your smartphone and that the Smart Life app has permission to access Bluetooth functionality.
- Open the app's "Home" interface, click on "+" in the upper right corner and select "Gateway Control Wireless Gateway (Zigbee)".
- Please power on the Zigbee gateway device. Press and hold the button for 5 seconds until the red light starts flashing. The device enters Wi-Fi setup mode.
- Select 2.4 GHz Wi-Fi and enter the password, click "Next". Wait for a while for the device to be successfully added, then click "Done" to complete the installation.
Step 3: Add Device (TRV)
Attention: The gateway must be added before adding the TRV.
- In custom mode, press and hold the "Minus Button" until the screen displays "OFF".
- Press and hold the "Mode Button" for a minimum of 3 seconds. When a circular animation begins on the display, the device has successfully entered network configuration mode.
- Open the app's "Home" screen, tap the "+" icon, select "Add Device", and scroll to the bottom. Tap "Other", then "Other Devices (Zigbee)", and select your gateway.
- Select "Confirm Indicator Light is Flashing" and tap "Next". The system will connect to the device. Wait for the device to be added successfully, then tap "Done" to complete the installation.
Operating Modes
1. Temperature Setting
Press the "Plus Button" or "Minus Button" to adjust the temperature per level in 0.5° increments.
2. Temperature Control Mode
Short press the "Mode Button" to switch between four standard modes and programming mode.
Four Standard Modes:
- Comfort Mode (Default: 20°C): Ensures ideal indoor temperature by constantly maintaining the pre-set comfort temperature.
- ECO Mode (Default: 15°C): An energy-saving feature that maintains basic indoor comfort and significant energy savings.
- OFF Mode: If heating is not required, switch the device to OFF mode to close the valve. To set OFF mode, either press the "Minus Button" until "OFF" appears on the display, or short press the "Mode Button" to switch between modes.
- Anti-Frost Mode (Default: 5°C): Prevents pipe freezing by maintaining a safe temperature of 5°C when activated, ideal for extended absences or colder climates. If frost protection is activated in software settings, the device will automatically enable this function even in OFF mode. The valve opens automatically when room temperature falls below 5°C and closes when temperature rises above 7°C.
Custom Mode:
When "" is displayed on the screen, the device is in custom mode. The temperature is controlled according to the value set using the button. It remains activated until the next manual change.
Attention: Before initial network configuration, the device has limited functionality. Programming, Vacation, and Boost Modes are temporarily disabled and will be available once network setup is completed.
Programming Mode:
If the screen says "G", the device is in programming mode. Configure temperature and schedules via the dedicated mobile app with smart programming. Set up to 6 programs daily with 4 mode options (Comfort mode, ECO mode, Frost Protection mode, and Custom mode).
Vacation Mode:
This mode is used when you are on vacation. You can specify the duration, and the device will maintain the temperature slightly below comfort level to prevent excessive heating and energy waste. After the set duration, the device automatically switches to the previous mode. You can choose this mode only in the app. When activated, "" and "" appear on the screen.
- Attention: Vacation Mode temperature follows Anti-freeze Mode temperature.
- To exit Vacation Mode manually, press and hold the "Mode Button" for 3 seconds to return to the previous mode.
Boost Mode:
In vacation or Programming mode, activate boost mode by setting a duration. The device will switch to boost mode and then return to the previous setting. Boost mode is automatically disabled when the device is turned off. You can only choose this mode in the app. When it is activated, "" is displayed on the screen.
Activating Switch-On Mode & Heating Pause:
Press the "Plus Button" until "00" displays. This action will fully open the valve.
- Winter Operation: If the external hot water supply is turned on and hot water is present in the pipes, setting the device to "On-Mode" will forcefully open the valve to heat the indoor space.
- Summer Operation: If the external hot water supply is turned off and there is no hot water in the pipes, setting the device to "On-Mode" will not heat the indoor space. This setting allows the internal spring of the valve to retract, which helps extend its lifespan.
System Modes (For App Use Only):
The system modes determine how the device controls and regulates the heating process.
- ON-OFF Mode: In this mode, the valve operates in a fully open (100%) or fully closed (0%) manner. When heating is activated, the valve opens completely; when heating is turned off, the valve closes completely. The valve position remains fixed and does not make any adjustments.
- PID Mode: In this mode, the valve continuously adjusts its opening percentage. This gradual adjustment helps align the actual heating temperature with the desired target temperature, maintaining a comfortable room temperature with minimal fluctuations.
Attention:
- PID mode typically consumes more energy than ON-OFF mode. Please select the system mode that best suits your needs.
- Frequent switching between system modes may negatively impact device performance, therefore it is recommended to operate it with caution.
Advanced Features
Voice Control
The TRV is compatible with Amazon Alexa, Google Assistant, and Alice for convenient voice control. Here are some example commands:
| Command Type | Example Commands |
|---|---|
| Scene Activation | "Alexa, Turn on SCENE NAME" / "OK Google, Turn on SCENE NAME" |
| Mode Control | "Set the DEVICE NAME to auto" / "Set the DEVICE NAME to off" |
| Temperature Adjustment | "Set the DEVICE NAME to 26 degrees" / "Drop the DEVICE NAME by 1 degree" / "Increase DEVICE NAME temperature" |
| Status Inquiry | "What mode is the DEVICE NAME?" / "What is the temperature of DEVICE NAME?" / "What is battery on the DEVICE NAME?" |
Note: "SCENE NAME" and "DEVICE NAME" are customizable. Ensure temperature units are consistent between the device and smart speaker.
Room-by-Room Control
With multiple TRVs and the Smart Life app, you can independently control the temperature of each room in your home, optimizing comfort and energy usage.
Screen Display Rotation
Tap the "Set Button" on the device to change the screen orientation for better readability.
Child Lock Function
The operation of the device can be locked to prevent settings from being changed unintentionally. To activate/deactivate child lock, press and hold the "Mode key" for 3 seconds. "" will be displayed/disappear on the screen.
Window Opening Detection
If the room temperature drops over 1.5°C in 5 minutes while heating, the device activates window detection and stops heating. This function closes the valve for 30 minutes, with status shown on the screen.
Attention: The detection can be cancelled by:
- Setting the temperature or changing the mode in the app or on the device.
- The detected temperature rises by more than 1.5°C within 4.5 minutes.
- If no action is taken, the detection will automatically stop after 30 minutes.
Anti-Limescale Protection
The device turns on automatically every Monday at 12:00 p.m. for maintenance to prevent the device's valve calcification. During this time, "" on the screen.
Calibration (For App Use Only)
The temperature calibration function allows users to adjust the device's temperature measurements to ensure accurate readings.
How to Calibrate:
- In the app, navigate to Settings > Temperature > Calibration.
- Adjust the device's temperature readings as needed to meet your requirements.
- Save the settings to complete the calibration process.
Switching Hysteresis (For App Use Only)
Range: 0.5-5°C. The switching hysteresis function reduces frequent switching by allowing downward deviation. For example, with a target temperature set to 25°C and a hysteresis of 0.5°C, the device will activate heating at 24.5°C and deactivate at 25°C.
Attention: The switching hysteresis setting can only be adjusted in ON-OFF mode.
Maintenance
Battery Replacement
As indicated in the setup section, replace the 3x AA alkaline batteries when the low battery alert appears on the device screen or in the app. Refer to "Step 1: Install/Replace Batteries" in the Setup Guide for detailed instructions.
Anti-Limescale Protection
The device performs an automatic anti-limescale cycle every Monday at 12:00 p.m. to prevent valve calcification. No user intervention is required for this process.
Restoring Factory Settings
Press and hold the "Mode key" and insert the batteries at the same time until "" is displayed on the screen and blinking for 3 seconds. The factory settings of the device will be restored and the device will restart.
Attention: If you restore the factory settings, all previous settings will be lost.
Power Failure Memory Function
The device maintains the current working mode and resumes the previous mode when it is turned back on after a power failure.
Troubleshooting
| Code | Problem | Solution |
|---|---|---|
| E1 | Temperature Sensor Error | Contact customer service staff. |
| F1 | Excessive Valve Travel | Check the installation and heating valve. |
| F3 | Insufficient Valve Travel | Check the heating valve. |
| F4 | Battery Depleted | Replace batteries immediately. |
| F5 | Valve Detection Failed | Check whether the valve is installed. The batteries may be of poor quality and not enough to power the motor. Replace batteries immediately. |
If F5 error persists:
- First, check the following items: Is the installation location correct? Is the connection secure? Is the valve body compatible?
- With the product display screen lit up, briefly press the "Mode Button".
- The product display will show "" initialization animation. Wait for the initialization animation to finish, and the F5 error code status will be cleared.
Attention: Keep power stable during installation. If the F5 error persists, please contact the retailer for technical support.
User Tips
- This TRV works well for making water heaters smart or for condominium heating systems.
- The Zigbee version is compatible with zigbee2mqtt and Home Assistant for advanced users.
- If experiencing difficulty connecting the WiFi version, try setting it up through another gateway if available, or ensure your router is broadcasting a 2.4GHz signal.
- Consider calibrating the temperature in the app to match your room's actual temperature. Some users found adjusting it by -2.0°C to -2.5°C improved accuracy.
- The Smart Life app offers excellent functionality and translation, making it easy to manage multiple TRVs and integrate with other smart home devices like temperature probes and connected outlets for comprehensive home automation.
Frequently Asked Questions
- Q: Is the TRV available in Anthracite color?
- A: Based on available product options, the TRV is offered in colors such as Light Grey, light green, light yellow, Orange, army green, Dark Grey, Lavender, Burgundy, and Chocolate. Anthracite is not listed.
- Q: Do I need a Zigbee gateway for the Zigbee version?
- A: Yes, the Zigbee version of the TRV requires a Tuya Zigbee gateway to function and connect to your smart home network. The WiFi version does not require a separate gateway.
Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official product documentation or contact your retailer. Additional item guides and documents, including a PDF user manual, can be accessed online by scanning the QR code provided in the setup section or by visiting the product page.
For further assistance, please contact customer support.