Anbernic RG40XXV

Contents

RG40XXV Handheld Game Console User Manual

Model: RG40XXV

Brand: Anbernic

Introduction

This manual provides detailed instructions for the Anbernic RG40XXV Handheld Game Console. Please read this manual thoroughly before using your device to ensure proper operation and to maximize your gaming experience.

Three Anbernic RG40XXV handheld consoles in transparent black, white, and purple, showcasing their large screens and RGB lighting effects.

The RG40XXV console features a retro design with a large screen, Linux 64-bit operating system, support for ported games, and customizable RGB lighting effects.

Package Contents

Upon opening your RG40XXV package, please verify that all items listed below are included:

  • RG40XXV Handheld Game Console
  • Charging Cable (5V/1.5A compatible)
  • User Manual
Contents of the RG40XXV package, including the white game console, a packing box, a charging cable, and the user manual.

Typical package contents for the RG40XXV console.

Setup

Initial Charging

Before first use, it is recommended to fully charge your RG40XXV console.

  • Connect the provided charging cable to the console's TYPE-C charging port and a compatible 5V/1.5A power adapter (not included).
  • The device's indicator light will show a Red light while charging.
  • Once fully charged, the indicator light will turn Green.
  • A Red light twinkling indicates that the battery is low and requires charging.

Inserting a Memory Card (TF/MicroSD)

The console supports external memory cards for additional game storage.

  • Ensure the memory card is formatted to FAT32.
  • Insert the FAT32 formatted memory card into the external card slot (TF2/EXT) on the console.
  • New folders for each supported game platform will be automatically created on the card.
  • You can then transfer games into the respective folders to play them via the "Game Rooms" menu.

Operating Instructions

Game Buttons and Ports Overview

Familiarize yourself with the console's layout:

ComponentDescription
Power KeyTurns the console on/off.
ResetResets the console.
JoystickAnalog input for movement. Features RGB lighting.
D-PadDirectional pad for digital input.
Game Keys (A, B, X, Y)Action buttons.
SELECT / STARTStandard game function buttons.
Left/Right Shoulder Buttons (L1, L2, R1, R2)Trigger and shoulder buttons.
VOL+/-Volume control.
TF1/INTInternal memory card slot.
TF2/EXTExternal memory card slot.
OTG/USBUSB On-The-Go port.
HDMIMini HDMI output for connecting to external displays.
Indicator LightShows charging and battery status.

Main Interface Menu

Navigate the main interface using the D-Pad or Joystick and the A/B/X/Y buttons.

  • Game Rooms: Select "Internal Card" or "External Card" to browse and play games from various platforms.
  • App Center: Access video player, music player, e-book reader, file manager, and expert mode.
  • Favorites: Press the START button in the game center to add games to this section.
  • History: View recently played games. This section can be cleared in settings.
  • Search: Quickly search for games on memory cards. Use X to delete keywords and Y to confirm search.
  • Settings: Access all console settings, including language, backlight, and background.

Common Settings

  • Language Settings: Go to Settings -> Language Settings. Supported languages include Japanese, French, Simplified Chinese, English, German, Spanish, Portuguese, Korean, Russian, and Brazilian Portuguese.
  • Backlight Brightness: Adjust screen brightness in Settings -> Backlight Brightness (5 levels available).
  • Backlight Time: Set the screen backlight timeout in Settings -> Backlight Time (1, 2, 5, 10 minutes, or always on).
  • Key Customization: Customize button mapping for console buttons or gamepads in Settings -> Button Custom.
  • Joystick Light: The joystick features 16 million color RGB lighting with 6 adjustable light effects (constant light, breath, rainbow, marquee, chasing, gaming). Customize colors and brightness in settings.White console joystick with RGB lighting options including Always Mode, Breath light fast, Simulator Phantom, Joystick Chasing light, Monochromatic Rainbow, and Multicolor Rainbow.

    RGB lighting effects for the joystick.

Game Settings

  • Game Quality: Adjust display effects (high-definition, scan line, fast, dot matrix) to achieve different screen filter effects.
  • Game Streaming (Moonlight):
    1. Ensure both the game console and your computer are connected to the same 5G WiFi network.
    2. On the console, select Settings -> Moonlight.
    3. Enter your computer's IP address to initiate pairing.
    4. Enter the PIN code displayed on your computer to successfully pair and connect.
    5. During streaming, press MENU + START to exit.
    An Anbernic RG40XXV console connected wirelessly to a laptop, demonstrating Moonlight Game Streaming functionality.

    Moonlight Streaming allows playing PC games on your console.

  • Bluetooth Settings:
    1. Go to Settings -> Bluetooth Settings.
    2. Select "Enable Bluetooth".
    3. Press the X key to scan for available devices.
    4. Select the desired controller from the device list to connect.

Online Multiplayer

The RG40XXV supports online multiplayer via 5G WiFi:

Two Anbernic RG40XXV consoles, one white and one transparent black, connected wirelessly for online multiplayer gaming.

Enjoy thrilling two-player battles with 5G WiFi support.

To set up online play using RetroArch:

  1. Ensure both consoles are on the same WiFi network.
  2. Note down the IP addresses of both consoles (found in NETWORK SETTINGS -> IP ADDRESS).
  3. On both consoles, enter the same game and open the RetroArch menu.
  4. For Console A (Host): Select Netplay -> Host -> Start Netplay Host.
  5. For Console B (Slave): Select Netplay -> Connect to Netplay Host, enter Console A's IP address, and press the START button to connect.

RA Emulator Shortcuts

The following shortcuts are available within the RetroArch emulator:

ShortcutFunction
MenuOpen Emulator Menu
Menu+R2Fast Forward
Menu+L2Slow Motion
Menu+R1Save State
Menu+L1Load State
Menu+YDisplay Frame Rate
Menu+BScreenshot
Menu+XPause
Menu+STARTQuit Emulator
Menu+VOL+Adjust Brightness
Menu+Left/Right DirectionSelect Save State Slot

Maintenance

  • Cleaning: Use a soft, dry cloth to clean the console's exterior. Avoid using harsh chemicals or abrasive materials.
  • Screen Care: Use a microfiber cloth specifically designed for electronics to clean the screen. Do not press hard on the screen.
  • Storage: Store the console in a cool, dry place away from direct sunlight and extreme temperatures.
  • Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the console when the low battery indicator (red light twinkling) appears. If storing for an extended period, charge the battery to about 50% every few months.

Troubleshooting

  • Console not turning on: Ensure the battery is charged. Connect the charging cable and wait a few minutes before attempting to power on.
  • Screen is blank or frozen: Try pressing the RESET button with a thin object (like a paperclip). If the issue persists, power off the console and restart.
  • Games not loading:
    • Verify that the game files are in the correct folders on the memory card (Internal or External).
    • Ensure the memory card is properly inserted and formatted to FAT32.
    • Check if the game file format is supported by the console.
  • Poor Wi-Fi or Bluetooth connection: Ensure you are within range of the Wi-Fi router or Bluetooth device. Check for interference from other electronic devices.
  • Joystick RGB light not working: Check the joystick light settings in Settings -> Joystick light to ensure it's enabled and configured as desired.

Specifications

FeatureDetail
ModelRG40XXV
CPUH700 quad-core ARM Cortex-A53, 1.5GHz
GPUDual-core G31 MP2
RAMLPDDR4 1GB
Operating SystemLinux (Opendinglinux)
Display Size4.0 inches
Screen TypeIPS, Color Display
Screen Resolution640x480
Internal Storage64G/128G/256G options
Expandable StorageUp to 512GB (TF/MicroSD)
Battery Capacity3200mAh
Wi-FiYes (Supports 5G WiFi)
BluetoothYes (Bluetooth-compatible)
Input/OutputMINI HDMI, TYPE-C (Charging & External Controller Interface)
Dimensions (L x W x H)139mm x 92mm x 22mm
Games Included5000+
Supported LanguagesJapanese, French, Simplified Chinese, English, German, Spanish, Portuguese, Korean, Russian, Brazilian Portuguese
CertificationCE
Diagram showing the H700 Cortex-A53 quad-core processor, Dual-core G31 MP2 GPU, LPDDR4 1GB RAM, and 64GB TF/MicroSD ROM.

Internal hardware specifications of the RG40XXV console.

User Tips

  • Game Library Expansion: While the console comes with 5000+ games, you can easily expand your library by adding a FAT32 formatted MicroSD card to the TF2/EXT slot and placing compatible game ROMs into the automatically created platform folders.
  • Optimizing Performance: Experiment with the "Game Quality" settings (high-definition, scan line, fast, dot matrix) to find the best visual experience for different games.
  • Customizing Your Experience: Don't forget to explore the "Settings" menu for options like language, backlight brightness and time, key mapping, and joystick RGB lighting effects to personalize your console.
  • Online Play Setup: For a smooth online multiplayer experience, ensure both consoles are connected to a stable 5G WiFi network and correctly configure the host/slave settings in RetroArch as described in the "Online Multiplayer" section.

Warranty and Support

For detailed warranty information and technical assistance, please refer to the official resources:

  • Official User Manual (PDF): A comprehensive PDF version of the user manual is available for download. You can access it here.
  • Technical Support Services: For further technical support and inquiries, please visit the official support website: https://win.anbernic.com.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.