Herdio HMA-BTB01

Contents

Herdio 2-Channel 5.1 Bluetooth Amplifier User Manual

Model: HMA-BTB01 (Also referred to as BT-01 / AMP-BTX01)

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Herdio 2-Channel 5.1 Bluetooth Amplifier. This device is designed to provide high-quality audio amplification for passive speakers, offering versatile connectivity options including Bluetooth, AUX, and TWS (True Wireless Stereo) functionality. Please read this manual thoroughly before use to ensure proper setup and optimal performance.

Herdio AMP-BTX01 Bluetooth Amplifier and power adapter
Herdio AMP-BTX01 Bluetooth Amplifier and included power adapter.

2. Safety Information & FCC Compliance

FCC Requirement: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

3. Package Contents

Please verify that all items are present in your package:

  1. Bluetooth Dongle (Amplifier Unit)
  2. Adhesive Backing Tape
  3. 2pcs Non-corrosive Screws
  4. Power Adapter (EU/UK/AU/US plug, depending on region)
Image showing different power adapter plug types (EU, UK, AU, US)
Various power adapter plug types available.

4. Setup

4.1 Mounting the Bluetooth Dongle

The Bluetooth Dongle can be secured using either the provided adhesive backing tape or the non-corrosive screws. Ensure the mounting surface is flat, clean, and dry before applying the adhesive backing tape. If using screws, tighten them carefully to avoid distorting the Bluetooth Dongle.

4.2 Bluetooth Receiver Wiring Instructions

Follow these steps for proper wiring:

  • Red Wire (B+): Connect to the positive terminal of the power supply.
  • Black Wire (GND): Connect to the negative terminal of the power supply.
  • Blue Wire (ACC/REM OUT):
    • Priority connection: Attach to the REM interface of the device.
    • If no REM interface is available: Connect to the ACC interface of the ignition wire.
  • RCA (3.5mm) Audio output (Amp): Connect to your amplifier's audio input.

Notes: Ensure all connections comply with local electrical safety standards. Verify polarity to avoid reverse connection damage.

Diagram showing the 2-channel speaker connection and 30W peak power
Wiring diagram for 2-channel speaker connection.
Diagram illustrating multiple external audio sources (AUX IN, Bluetooth, TWS)
Multiple external audio sources: AUX IN, Bluetooth, TWS.
Video demonstrating the physical product and power adapter connection.

5. Operation

5.1 Pairing with a Bluetooth Device

  1. Ensure the stereo system is turned on and the Bluetooth Dongle is powered on.
  2. Switch the Audio Source Mode to AUX IN or Line IN on your stereo system.
  3. Turn on the Bluetooth function on your mobile device and search for "BT-01". Select it to pair.
  4. The Bluetooth Dongle is now ready for receiving audio via Bluetooth and outputting music to the connected sound system.

Note: To pair with a different device, you must repower the Bluetooth Dongle. The Bluetooth Dongle is in searching mode when it is powered off and on. All music selection & playback is controlled from your mobile device.

Image demonstrating Bluetooth 5.1 connectivity range up to 50 feet
Bluetooth 5.1 connection range up to 50 feet (approximately 15 meters).

6. Technical Specifications

Feature Specification
Model Number HMA-BTB01 (BT-01 / AMP-BTX01)
Bluetooth Version 5.1 (V5.3 according to PDF)
Bluetooth Profiles A2DP
Operating Distance Typically 10m / 33ft (Up to 50 feet / 15 meters)
Operating Voltage +12V~24V DC
Operating Current 20mA
Channels 2 (2.0)
Maximum Power Per Channel 6W (30W Peak Power for 2 speakers)
Weight 96g / 3.386oz
Dimensions 42mm x 44mm x 22mm / 1.65inch x 1.73inch x 0.87inch
Material Plastics (ABS)
Certification CE, RoHS, WEEE
Image showing various speaker scenarios (Ceiling, Outdoor, Marine, Bookshelf Speakers)
The amplifier is suitable for various scenarios including ceiling, outdoor, marine, and bookshelf speakers.

7. Troubleshooting

Problem Cause Solution
No power.
  • Incorrect wiring
  • Fuse is blown
  • Check wiring
  • Replace fuse
No sound.
  • Volume is too low
  • Connection is loose
  • Increase volume
  • Double check connection

8. User Tips

  • Easy Installation: Users have noted the product is easy to install and operate, making setup straightforward.
  • Bluetooth Range: The Bluetooth connection typically works well within 33 feet (10 meters), with some users experiencing connectivity up to 50 feet (15 meters) in open environments.
  • Power Cycling for New Devices: If you need to pair with a new Bluetooth device, simply power off and then power on the Bluetooth Dongle to put it back into searching mode.

9. Warranty and Support

All Herdio speaker products come with a 1-year Limited Warranty against defects in materials and workmanship. Proof of purchase must accompany all claims. During the warranty period, Herdio will replace any defective part and correct any defect in workmanship without charge for either parts or labor.

The Technical Support Center at HERDIO is available from Monday to Friday, excluding holidays. If you have any questions, feel free to send your messages to our mailbox: support@herdiotech.com

For more detailed information about the product, please visit www.Herdiotech.com.

A user manual in PDF format is also available for download: User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.