GTMEDIA V8 FINDER 2

Contents

GTMEDIA V8 Finder 2 Digital Satellite Finder

Model: V8 FINDER 2

Important Safety Instructions

Thank you for choosing our product. Before installation, please review the following notes for safe and proper operation:

  • Be sure to read this user manual before starting operation.
  • You must install the dish with correct direction and angle. If the dish is not working properly, contact your local dealer.
  • When the unit is suddenly moved to a hot area from a cold area, it may cause some problems. In that case, turn off the power, and turn on again after 1-2 hours.
  • Keep the meter placed in a clean space with sufficient ventilation.
  • Do not cover the meter or place it on a unit that emits heat.
  • Clean the case with a soft cloth and a little washing liquid.
  • Do not remove the cover.
  • Do not expose the unit to extreme heat, cold, or humid conditions.
  • No liquids or any other materials should come inside the unit.

Product Overview & Illustration

The GTMEDIA V8 Finder 2 is a portable digital satellite finder designed for DVB-S/S2/S2X signal reception. It features a 3.5-inch HD LCD screen for clear display and a robust set of tools for satellite installation and signal analysis.

GTMEDIA V8 Finder 2 with carrying bag
GTMEDIA V8 Finder 2 Digital Satellite Finder with protective carrying bag.
Detailed view of V8 Finder 2 ports and battery
Professional Satellite Interface (LNB IN), USB and Power Socket, and internal Large Capacity Battery (7.4V / 4000 mAh).
V8 Finder 2 signal decoding capabilities
The V8 Finder 2 supports multiple signal decoding including DVB-S/S2/S2X, BISS/PowerVu, VCM/ACM/Multi-stream/T2MI, PLP, MPEG2, MPEG4, and H.264 (8 Bit).
V8 Finder 2 key features
Key features: DVB S2X/S2/S support, Spectrum analysis, Loop Search, 3.5-inch HD LCD, 7.4V 4000mAh battery, Fsat Charging, Media functions, USB, and Upgrade capability.

Device Layout and Controls

Diagram of V8 Finder 2 front panel and ports
Front panel and port layout of the GTMEDIA V8 Finder 2.
V8 Finder 2 Part Descriptions
No. Description Function
1LCD ScreenVideo display
2Battery Level IndicatorDisplays battery level. Charge immediately if red warning appears.
3PowerPower indicator light
422KHz22kHz indicator light
513V/18VVertical/Horizontal polarization voltage output light
6LockSignal Lock indicator light
7ChargerCharging: Flashing red. Fully charged: Red and blue.
8Red & RECRed Key & Enter record function
9Green & SUBTGreen key & subtitle interface
10Yellow & TEXTYellow key & Teletext interface
11Blue & AUDIOBlue key & Audio interface
12MENUShow the main menu or jump back to previous menu in sub-menu settings
13EXITEscape from current menu and save settings
14Navigation KeyVolume Control, move cursor, channel change, confirm selection
150-9Number key to select channels or enter programming
16SPECSpectrum interface
17LOOPLOOP Search interface
18B.LIGHTDisplay of LCD on/off
19TV/RTV and radio switch
20INFOInfo interface
21SATDisplay the satellite list
22MUTEEnable or disable the audio output
23LNB INConnect to satellite antenna cable
24USBConnect to USB memory
25Power InputConnect to adaptor input (5V/9V/12V)
26Power SwitchTurn on/off meter
27HDMIUse HD cable to connect for TV
28AV OUTConnect to AV port for TV
29AV INConnect to AV port for meter
30SpeakerIntegrated speaker

Setup

Initial Connections

Before operating the V8 Finder 2, ensure all necessary connections are made.

Wiring diagram for V8 Finder 2 to TV and TV Box
Connection diagram for the V8 Finder 2 to a television via HDMI or AV, and to a TV Box. Also shows AC/DC adapter and antenna cable connections.
  • Power Connection: Connect the AC/DC adapter to the power input (25) on the V8 Finder 2 and plug it into a power outlet. The device supports 5V/9V/12V fast charging up to 18W.
  • Satellite Antenna: Connect your satellite antenna cable to the LNB IN port (23).
  • External Display (Optional):
    • For HD display, connect an HDMI cable from the V8 Finder 2's HDMI port (27) to your TV's HDMI input.
    • For standard definition, connect AV cables from the V8 Finder 2's AV OUT port (28) to your TV's AV IN ports.
  • External Device (Optional): Connect a TV Box to the AV IN port (29) on the V8 Finder 2 if needed.
  • USB Device (Optional): Connect a USB memory device to the USB port (24) for media playback, software upgrades, or data backup.

Menu OSD Instruction

After connecting the cables, press the MENU button (12) to display the Main Menu on the screen.

Main Menu OSD of V8 Finder 2
Main Menu On-Screen Display (OSD) showing Installation, Spectrum, Loop Search, Calculate, Channel, Media, Tools, and System options.
  • Installation: For setting up satellite parameters.
  • Spectrum: For viewing signal spectrum.
  • Loop Search: For performing loop searches.
  • Calculate: For calculating satellite installation data.
  • Channel: For managing channels.
  • Media: For playing media files.
  • Tools: For various utility functions.
  • System: For system settings.

Installation Menu

From the Main Menu, select Installation and press OK to enter the Satellite list.

  • Use the Navigation keys (14) to move the cursor and select the desired item. Press OK to confirm.
  • Satellite: Select the satellite you want to configure.
  • LNB Freq: Select the correct LNB frequency.
  • DiSEqC1.0 / DiSEqC1.1: Set the port number for DiSEqC switches.
  • 22K: Turn on or off the 22 kHz switch.
  • LNB Power: Set LNB power output to H (Horizontal), V (Vertical), Auto, or Off (Default is Auto).
  • Motor Setup: If using DiSEqC1.2 or USALS, press the Navigation keys to select IF Channel and use the number keys to input the Center Frequency.
  • Red Key (REC): Add a new satellite.
  • Green Key (SUBT): Edit the currently selected satellite.
  • Delete Key: Delete the currently selected satellite.
  • Blue Key (AUDIO): Select the current satellite, enter the satellite search setting menu, and confirm the program search.
  • "0" Key: Enter the Transponder setting menu. The operation method is similar to the satellite setting menu.
  • Info Key: Enter the current Transponder signal information display interface.

Operating Instructions

Calculate

Select Calculate from the Main Menu and press OK.

  • Longitude: Displays the longitude of the current satellite.
  • Local Longitude: Use number keys to enter your local longitude.
  • Local Latitude: Use number keys to enter your local latitude.
  • Calculate: Based on the set latitude and longitude, the device calculates data references needed for satellite installation.

Channel

Select Channel from the Main Menu and press OK to enter the Sub menu.

  • TV Channel List: View and manage television channels.
  • Radio Channel List: View and manage radio channels.
  • EPG: Access the Electronic Program Guide.
  • Timer Setting: Configure timer events.
  • Favorite: Manage favorite channels.
  • Delete All: Delete all channels.

Media

Select Media from the Main Menu and press OK to enter the media menu.

  • Music: Play music files.
  • Picture: View picture files.
  • Movie: Play movie files.
  • Record Manager: Manage recorded TS programs.
  • HDD Information: View information about connected storage.
  • DVR Configuration: Configure Digital Video Recorder settings.

Tools

Select Tools from the Main Menu and press OK to enter the Sub menu.

  • Information: Press OK to view product information.
  • Factory Setting: Press OK to confirm factory reset. Note: A factory reset will erase all user settings and the database.
  • USB Upgrade: Update firmware from a USB drive.
  • USB Backup: Backup software or database to a USB drive.
  • Record: Record TS stream to a USB drive.

System

Select System from the Main Menu and press OK to enter the menu list.

  • Language: Change the system default language.
  • AV Setting: Enter AV system settings options.
  • Local Time Setting: Configure system time zone settings.
  • OSD Setting: Adjust OSD options, including turning the Beeper on or off.
  • WiFi Manager: Set up WiFi connection settings.

Specifications

Feature Specification
TypeDIGITAL Satellite Finder
Brand NameGTMEDIA
Model NumberV8 FINDER 2
Display3.5 inch High Definition TFT LCD Screen
Video DecodingH.264 (8 Bit), MPEG2, MPEG4
Signal SupportDVB-S/S2/S2X, BISS/PowerVu, VCM/ACM/Multi-stream/T2MI, PLP
High DefinitionYes (1080P)
FTA (Free To Air)Yes
BatteryBuilt-in 7.4V / 4000mAh high-capacity battery
Charging18W Fsat Charging (supports 5V/9V/12V voltage)
ConnectivityUSB, HDMI, AV IN/OUT, LNB IN
With USB WifiNo (WiFi Manager in System menu suggests external USB WiFi dongle support)
PackageYes
OriginMainland China
CertificationCE
Product Dimensions (approx.)Length: 20cm, Width: 16cm, Height: 5cm
Product Weight (approx.)0.586 kg

Maintenance

  • Cleaning: Clean the device case with a soft cloth moistened with a little washing liquid. Do not use harsh chemicals or abrasive materials.
  • Software Upgrade: To update the device firmware, download the update file to a USB memory stick. Insert the USB stick into the V8 Finder 2's USB port. Navigate to the 'Tools' menu, select 'USB Upgrade', choose the update file, and press 'OK'. Warning: Do not turn off power or remove the USB during the upgrade process, as this may damage the device software and prevent it from booting.
  • USB Backup: You can back up the device's software or database to a USB disk via the 'Tools' menu.

Troubleshooting

  • Device Restarts During Charging: When the adapter is charged and plugged in, the machine may restart once. This is normal behavior and not a product problem.
  • Dish Not Working Properly: If you encounter issues with your satellite dish, ensure it is installed with the correct direction and angle. If problems persist, contact your local dealer for assistance.
  • Operational Issues After Temperature Change: If the unit is moved from a cold to a hot environment, it may experience temporary issues. Turn off the power and allow the unit to acclimatize for 1-2 hours before turning it on again.
  • Loss of Settings: Performing a 'Factory Setting' reset from the 'Tools' menu will erase all user settings and the database. Back up important data before performing a factory reset.
  • No Signal / Incorrect Signal Type: This device is a Digital Satellite Finder (DVB-S/S2/S2X). It is designed for satellite signals and cannot measure terrestrial (DVB-T/T2) or cable TV signals. Ensure you are attempting to receive the correct type of signal for this device.

User Tips

  • Durability: Users have reported good long-term performance, with some using the device for several years.
  • Signal Acquisition: The V8 Finder 2 is effective at capturing satellite signals, providing clear image quality for alignment.
  • Feature Exploration: The device offers many options and modes. Take time to explore the different menus (Installation, Spectrum, Media, Tools, System) to fully utilize its capabilities.
  • Wi-Fi Functionality: While not built-in, the device supports Wi-Fi connectivity via an external USB Wi-Fi dongle, which can be configured in the 'System' -> 'WiFi Manager' menu.

Warranty & Support

For product feature introduction, user guides, software updates, or technical support, please refer to the following resources:

Manufacturer Information:

  • Manufactured by: Shenzhen Jiti Multimedia Technology Co., Ltd / GTMAX TECHNOLOGY, S.L.
  • Address: 601A, comprehensive building, Nankeng second industrial zone, Nankeng community, Bantian street, Longgang District Shenzhen, 518000, Guangdong, CN
  • European Address: C. DEL PUERTO DE POZAZAL, 4, NAVE 32, 28031 MADRID, ESPAÑA
  • Contact Person: Samuel
  • Telephone: +34 910641455
  • Email: sp-sales01@gtmedia.cc

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.