1. Introduction
This manual provides essential information for the safe and effective use of your 6.5L Portable Plastic Fuel Tank. This tank is an ideal solution for carrying extra fuel or water on any vehicle with a flat surface, providing approximately 1.7 gallons of additional capacity for extended adventures.
2. Safety & Warnings
FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN DAMAGE TO THE PRODUCT, PROPERTY, OR PERSONAL INJURY.
- Read all instructions before use.
- FLAMMABLE LIQUID: This tank is designed for flammable liquids. Handle with extreme care.
- IGNITION SOURCES: Keep away from open flames, sparks, and other ignition sources. Do not smoke while handling fuel.
- VENTILATION: Always fill and dispense fuel in a well-ventilated area.
- CHILD SAFETY: Keep out of reach of children. Do not allow children to handle or be near the tank unless supervised by an adult.
- INSPECTION: Inspect the product for any damage (cracks, leaks, loose caps) before each use. Do not use if damaged.
- OVERFILLING: Do not overfill the tank. Leave space for fuel expansion, especially in warm conditions.
- STORAGE: Do not store the tank in vehicles or living areas. Store in a cool, well-ventilated area, away from direct sunlight and ignition sources.
- HANDLING: Handle with care to avoid cuts or injuries.
- INSTALLATION: Follow all installation and operation guidelines to avoid injury and ensure secure mounting.
3. Product Overview
Components
- 6.5L Plastic Fuel Tank
- Screw Cap (standard)
- Faucet Cover (optional, for models with dispensing faucet)
- Mounting Brackets (e.g., One-Line Bracket, Anti-Theft Bracket - typically sold separately)
Dimensions & Material
- Material: Advanced Engineering Plastics (HDPE)
- Volume: 6.5 Liters (approximately 1.7 Gallons)
- Length: 635 mm
- Width: 128 mm
- Height: 165 mm


4. Setup & Installation
The fuel tank is designed for flat surface installation on various vehicles. Mounting brackets are typically sold separately and are essential for secure attachment.
- Choose Mounting Location: Select a secure, flat, and stable surface on your vehicle, such as a roof rack, rear cargo carrier, or other designated exterior mounting points. Ensure the location does not obstruct visibility, vehicle lights, or other critical functions.
- Attach Brackets: If using a 'One-Line Bracket' or similar mounting hardware, follow the instructions provided with your specific bracket system to securely attach it to the vehicle.
- Mount the Tank: Position the fuel tank onto the installed brackets. Ensure it fits snugly and is properly aligned.
- Secure the Tank: Use the provided fasteners (e.g., knobs, bolts) from your mounting kit to firmly secure the tank to the brackets. If using an 'Anti-Theft Bracket', ensure it is properly engaged and locked.
- Verify Security: Before driving, gently shake the tank to ensure it is stable and will not shift or detach during vehicle movement. Re-tighten any fasteners if necessary.




5. Operating Instructions
5.1 Filling the Tank
- Place the tank on a stable, flat surface in a well-ventilated area, away from any ignition sources.
- Carefully unscrew and remove the main cap.
- Slowly pour fuel into the tank. Use a funnel to prevent spills.
- DO NOT OVERFILL. Leave a small air gap (approximately 5-10% of the tank volume) to allow for fuel expansion, especially in warm weather.
- Securely replace the cap, ensuring it is tightly sealed to prevent leaks.
- Wipe away any spilled fuel immediately and dispose of rags safely.
5.2 Dispensing Fuel
- Position the tank on a stable surface where fuel can be safely dispensed into your vehicle or equipment. Ensure good ventilation.
- If your tank model includes a faucet, carefully open the faucet to control the flow of fuel.
- If your tank does not have a faucet, carefully unscrew the cap and pour the fuel. Use a funnel if needed.
- Once dispensing is complete, close the faucet or securely replace the cap.
- Clean up any fuel spills immediately.
6. Maintenance
- Regular Inspection: Periodically inspect the tank for any signs of wear, cracks, punctures, or leaks. Pay close attention to seams and the area around the cap.
- Cap and Seals: Ensure the cap is always tight and the internal seal (if present) is intact and free from damage. Replace if worn or damaged.
- Cleaning: Clean the exterior of the tank with mild soap and water. Do not use harsh chemicals, solvents, or abrasive cleaners, as these can degrade the plastic material.
- Storage: When not in use, store the tank in a cool, dry, well-ventilated area, away from direct sunlight and any potential ignition sources. If storing for extended periods, especially if switching between fuel and water, it is recommended to empty and thoroughly clean the tank.
7. Troubleshooting
- Leakage from Cap: Ensure the cap is screwed on tightly and the seal is properly seated and undamaged. If the seal is compromised, it may need replacement.
- Leakage from Tank Body: If you observe leaks from the tank body, it indicates a crack or puncture. The tank should be immediately emptied, safely disposed of, and replaced. Do not attempt to repair a damaged fuel tank.
- Difficulty Dispensing: Check the spout or faucet for any blockages. Ensure the tank is positioned correctly for gravity-fed dispensing if applicable.
- Tank Deformation: Ensure the tank was not overfilled, especially in hot weather, which can cause pressure buildup. Always leave expansion space. Store the tank properly to avoid prolonged exposure to extreme temperatures.
8. Specifications
| Model | 11XLDB819 |
| Item Type | Petrol Cans |
| Material | Advanced Engineering Plastics (HDPE) |
| Volume | 6.5 Liters (approx. 1.7 Gallons) |
| Dimensions (L x W x H) | 635 mm x 128 mm x 165 mm |
| Color Options | Black, Orange |
| Origin | Mainland China |
9. User Tips
- Mounting Accessories: Mounting brackets and anti-theft locks are often sold separately. Verify your purchase includes these if needed for your intended use.
- Expansion Space: Always leave some air space (5-10% of volume) when filling to allow for fuel expansion, especially in warm conditions. Avoid storing a full tank in direct sunlight.
- Dual Purpose: While primarily designed for fuel, this tank can also be used for emergency water storage. Ensure thorough cleaning if switching between liquids.
10. Compliance Information
This product bears the CE mark, indicating compliance with EU national safety regulations. The use of harmful substances has been minimized during the manufacturing process. Please dispose of waste products properly and do not dispose of them casually.
11. Manufacturer & Support
Manufacturer
Hefei Mingyun Building Materials Co., Ltd.
Room 202, Building 9, Donghuachao Residential Park
388 Shimen Road, Shushan District, Hefei City, Anhui Province, China
Postal Code: 340104
Phone: +86-13675510922
Email: 29100689@qq.com
EU Authorized Representative
TOCYA TRADING
79 rue de patay, 75013, Paris Paris Ile-de-France
Phone: +33-143443019
Email: TOCYATRADING75013@outlook.com
Warranty & Support
For warranty information, technical support, or service inquiries, please contact your original seller or the manufacturer directly using the details provided above. Please have your model number (11XLDB819) and purchase date available.