Niditon NZ6688J

Contents

Niditon NZ6688J Sunrise Alarm Clock User Manual

Model: NZ6688J

1. Introduction

Thank you for choosing the Niditon NZ6688J Wake-Up Light. This device is designed to gently prepare your body for waking up using a simulated sunrise, offering a more natural and pleasant start to your day. It also features sunset simulation, FM radio, multiple alarm settings, mood lighting, and a USB charging port. Please read this manual carefully to ensure proper use and to fully enjoy all the features of your new alarm clock.

Front view of the Niditon NZ6688J Sunrise Alarm Clock displaying 08:08, with a warm yellow light gradient.

Figure 1: Niditon NZ6688J Sunrise Alarm Clock

Video 1: Product demonstration of the sunrise alarm clock features.

2. Important Safety Information

Danger:

  • Water and electricity are a dangerous combination. Do not use this appliance in wet surroundings (e.g., in the bathroom or near a shower or swimming pool).
  • Keep the adapter dry.
  • Do not let water run into the appliance or spill water onto the appliance.
  • This appliance is for indoor use only.

Warning:

  • If the adapter, cord, or appliance has been damaged in any way, if liquid has spilled or objects have fallen into and/or onto the appliance, if the appliance has been exposed to rain or moisture, if it does not operate normally, or if it has been dropped or damaged, it should not be operated.
  • Only use the appliance in combination with the adapter supplied.
  • If the adapter (cord) is damaged, always have it replaced with one of the original type in order to avoid a hazard.

Caution:

  • The appliance has no on/off switch. To disconnect the appliance, remove the adapter from the wall socket. The adapter must remain easily accessible at all times.
  • If you often wake up too early or with a headache, reduce the set light intensity level and/or the set Sunrise Simulation time.
  • If you often wake up by the alarm sound, increase the set light intensity level or the set Sunrise Simulation time.

3. What's in the Box

Please check the contents of your package:

  • 1x Niditon Wake-Up Light (NZ6688J)
  • 1x User Manual
  • 1x CR2032 Battery (Pre-Installed)
  • 1x Power Cord
  • 1x 5V/2A Adapter

4. Product Overview

Familiarize yourself with the device's components and controls.

Front view of the alarm clock with blue light, rear view showing speaker and ports, and the product box labeled 'NIDITON'.

Figure 2: Front, Rear View, and Packaging of the Wake-Up Light

4.1. Display Icons

IconDescription
FMFM Radio
♪Sound
🔔Alarm 1/2
ZzSnooze
🌙Fall-asleep
+/-Set+ / Set-
🌈Colored lights
☀️Sunrise light
SETSetting mode

4.2. Button Functions

ButtonFunction
🔔 / 🔔Alarm 1 / Alarm 2 (On/Off, Set)
Zz / ☀️Snooze / Sunrise light (On/Off)
💡 / -Light brightness - / Set -
🌈 / OKColor light (On/Off, Select)
💡 / +Light brightness + / Set +
🔊 / +Frequency + / Volume +
FMFM Radio (On/Off, Search)
🔊 / -Frequency - / Volume -
😴 SleepFall-asleep mode (On/Off, Set)
Dimmer / Time SetDimmer / Time set

Note: All your personalized settings will be permanently stored in the memory and will not be erased by removing the adapter from the electrical outlet. You can change all settings at any time; the last setting will be stored.

5. Setup

5.1. Pulling out Insulation Sheet

The Wake-Up Light comes with a pre-installed CR2032 battery. This battery maintains memory settings during power outages. Before first use, pull out the insulating sheet from the battery compartment to activate memory mode. The battery typically lasts 2 years; replace it when exhausted.

5.2. Power On

Use the supplied 5V/2A adapter to connect the Wake-Up Light to a power outlet. Some functions may be limited if a lower power adapter is used.

5.3. Placement

Place the Wake-Up Light approximately 16-20 inches (40-50 cm) from your head, for example, on a bedside table, for optimal light simulation effects.

5.4. Setting the Clock Time

You must set the clock time when you plug in the appliance for the first time:

  1. Press the Light Brightness - / + button to adjust to 12-hour or 24-hour format. Press the Color Light / OK button to confirm.
  2. Press the Light Brightness - / + button to set the Hours. Press the Color Light / OK button to confirm.
  3. Press the Light Brightness - / + button to set the Minutes. Press the Color Light / OK button to complete.

For subsequent time settings, press and hold the Dimmer / Time Set button to enter the time setting process.

6. Operating Instructions

6.1. Setting Alarms (Alarm 1 & 2)

The device supports two independent alarms (Alarm 1 and Alarm 2). Alarm 2 is set in the same way as Alarm 1.

  1. Press and hold the Alarm 1 button to enter Alarm 1 setting.
  2. Set Alarm Hours: Use Light Brightness - / + to adjust, then Color Light / OK to confirm.
  3. Set Alarm Minutes: Use Light Brightness - / + to adjust, then Color Light / OK to confirm.
  4. Set Alarm Sounds: Use Light Brightness - / + to select from:
    • OFF: No Sound
    • S01-S07: Wake-Up ringtones (Bird, Ocean wave, Beep, Piano, Stream, Valley Echo, Bell)
    • FM Radio: Wakes up to the last listened FM channel.
    Press Color Light / OK to confirm.
  5. Set Alarm Volume: Use Light Brightness - / + to adjust (level 01-20), then Color Light / OK to confirm.
  6. Set Sunrise Simulation Time: Use Light Brightness - / + to set the duration (10-60 minutes before alarm). Press Color Light / OK to confirm.
  7. Set Maximum Sunrise Brightness: Use Light Brightness - / + to adjust (level 01-20). Press Color Light / OK to complete.

6.2. Turning Alarms On/Off

Press the respective Alarm 1 or Alarm 2 button to toggle the alarm on or off. The alarm icon will appear/disappear on the display.

6.3. Snooze Function

When the alarm sounds, tap the Snooze / Sunrise Light button to activate snooze. The lamp stays on, but the sound is muted for 9 minutes. After 9 minutes, the alarm sound will resume.

6.4. Turning the Alarm Off

When the alarm goes off, press the respective Alarm 1 or Alarm 2 button to turn it off. This deactivates the alarm profile for that day. The light and sound will automatically turn off 30 minutes after the alarm has gone off if not manually turned off.

6.5. FM Radio

6.5.1. Searching for FM Channels

Before listening to the radio, search for channels:

  1. Press the FM button to turn on the FM radio.
  2. Press and hold the FM button for 2 seconds to automatically search for channels (frequency range: 76.0MHz to 108MHz).

User Tip: After the initial search, you can directly step into the previous channel by simply clicking the FM button.

6.5.2. Listening to the Radio

  1. Press the FM button to turn on the FM radio.
  2. Adjust Channels Manually: Press and hold Frequency - / + buttons to manually adjust channels after automatic search. (Ensure antenna is unwound for best reception).
  3. Adjust FM Volume: When FM is enabled, use Volume - / + buttons to adjust the volume (range 01-20).
  4. Press the FM button again to turn off the radio.

6.6. Lighting Functions

Three panels illustrating light uses: Nursing (warm white), Bed Time (night light), Relaxing (multi-color). Below are icons for features.

Figure 3: Various lighting modes for different activities.

6.6.1. Using Sunrise Light as a Lamp

  1. Press the Snooze / Sunrise Light button to turn on the sunrise light.
  2. Adjust Brightness: Use Light Brightness - / + buttons to adjust the brightness (range 01-20).
  3. Press the Snooze / Sunrise Light button again to turn off the sunrise light.

6.6.2. Colored Lights

  1. Press the Color Light / OK button to turn on the colored lights.
  2. Adjust Lighting Mode: Press the Color Light / OK button repeatedly to cycle through 11 lighting effects:
    • 1-5: Color-Mode (Red, Green, Cyan, Blue, Purple)
    • 6-11: Effect-Mode (Autochromic, Clockwise, Counterclockwise, Aurora, Flame, Snowy Mountain)
  3. Adjust Brightness: Use Light Brightness - / + buttons to adjust the brightness (range 01-20).
  4. Press the Color Light / OK button again to turn off the colored light (when adjusted to C-11 mode).

6.7. Fall-Asleep Mode (Sunset Simulation)

This mode gradually dims the light and plays soothing sounds to help you fall asleep.

  1. Press and hold the Fall-asleep button to enter sleep sound setting.
  2. Select Sleep Sound: Use Light Brightness - / + to choose from:
    • S-01 (Meditation)
    • S-02 (Chirp)
    • S-03 (Ocean Wave)
    • FM Radio (Plays the last listened channel)
    Press Color Light / OK to confirm.
  3. Set Sleep Timer: Press the Fall-asleep button repeatedly to set the duration (ALL (continuous), OFF, 15/30/60/90/120 minutes). The setting will automatically save and start after 2 seconds.
  4. Adjust Sound Volume: Use Volume - / + buttons to adjust the sound volume (level 01-20).

During Fall-asleep mode, you can still adjust sound parameters and light mode. Volume and light brightness will gradually fade until the timer ends.

6.8. Dimmer / Time Set

In the time display interface, click the Dimmer / Time Set button to adjust the screen brightness (100% - 25% - OFF) in turns.

6.9. USB Charging

You can use the USB port on the back of the device to charge your USB-powered devices (maximum output: 1000 mA).

7. Maintenance

7.1. Cleaning

Clean the appliance with a soft, dry cloth. Do not use abrasive cleaners or solvents.

7.2. Storage

If you are not going to use the appliance for an extended period, remove the adapter from the wall socket and store the appliance in a safe, dry location where it will not be crushed, banged, or subject to damage.

7.3. Disposal

Do not dispose of the product with normal household waste. Please hand it in at an official collection point for recycling electronic products, following your local regulations. This helps preserve the environment and prevent potential harm from hazardous substances.

8. Troubleshooting

  • Device not turning on: Ensure the power adapter is securely connected to both the device and a working power outlet. Verify the adapter is 5V/2A.
  • Display is dim or off: Adjust the display brightness using the Dimmer / Time Set button.
  • Alarm not sounding/light not coming on: Check if the alarm is enabled (icon visible on display) and if the alarm time, sound, and light settings are correctly configured.
  • FM Radio reception is poor: Fully unwind the antenna and try repositioning the device for better signal reception.
  • Settings lost after power outage: Ensure the CR2032 battery insulation sheet has been removed. If settings are still lost, the CR2032 battery may need replacement.

9. Specifications

FeatureSpecification
ModelNZ6688J
Rated Input Voltage Adapter100-240V
Rated Input Frequency Adapter50/60Hz
Rated Output Power Adapter10W
USB Charging Port Output5V, 1000mA
Nominal Light Output (Level 1-20)1 ~ 210 lux at 45cm
Nominal Light Color (Mode 1-12)1600W
Dimensions (H x W x D)17 x 17 x 8 cm
Weight Main Unit / AdapterApprox. 0.3kg / 0.04kg
Cord Length Adapter120cm
Operating Temperature0°C to 40°C
Relative Humidity15% to 90% (non-condensing)
FM Operating Frequency76.0 MHz - 108.0 MHz

10. User Tips

  • For a more effective wake-up experience, experiment with different sunrise simulation durations and maximum brightness levels to find what works best for you.
  • Utilize the two separate alarms for different schedules, such as weekdays and weekends.
  • When using the FM radio, fully extend the antenna and try different placements to optimize signal reception.
  • The Fall-asleep mode can be customized with various sounds and light dimming to create a personalized sleep environment.

11. Warranty and Support

Niditon products are manufactured to high-quality standards. For any support inquiries, please refer to the contact information provided on the product packaging or the official store website. Keep your proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.