1. Product Overview
The GODIAG GT327 SUPER DOIP ENET OBDII ELM327v1.5 Full Scanner is designed for car maintenance technicians and DIY enthusiasts. It features an ARM core dual-mode Bluetooth communication module, supporting Bluetooth connectivity for Android and Apple phones for OBDII diagnosis. The device can also connect to a computer via an Ethernet cable for use with DOIP (BMW, Benz, Volkswagen, Audi, Bentley, Lamborghini, Land Rover, JAGUAR, VOLVO, Geely) and ENET vehicle-specific diagnostic software for programming and coding operations.
When connected to a vehicle, the GT327 displays the current diagnostic interface voltage. If the voltage drops below 11V, an alarm will sound, indicating that the car battery needs charging. It is crucial not to diagnose or program the vehicle, or attempt to start it, when the voltage is low to prevent battery damage. For mobile diagnosis and programming of DOIP ENET vehicles, a network interface to mobile phone conversion cable is required (not included).
The device operates in an ultra-low power consumption DC-DC mode, incorporating overvoltage and overcurrent protection. It supports a wide range of vehicles from 9-30V, including motorcycles, cars, trucks, commercial vehicles, and SUVs.
2. Product Structure

Image: Front view of the GODIAG GT327 device, highlighting its various ports and indicators.
- OBD2 Male Connector: Used to connect to the vehicle's OBD2 diagnostic interface (supports 24V trucks).
- Voltage Display: Shows the input and output voltage.
- POW Indicator: Power indicator light.
- Bluetooth Data Input Indicator: Lights up when Bluetooth data is being received.
- Bluetooth Data Output Indicator: Lights up when Bluetooth data is being transmitted.
- ENET Interface: Ethernet port for computer connection.
- DOIP ENET Communication Switch: Toggles DOIP ENET communication.
3. Functions
The GODIAG GT327 SUPER DOIP ENET OBDII ELM327v1.5 Full Scanner supports wireless Bluetooth communication for standard OBD II vehicle diagnostics.
Supported Protocols:
- SAE J1850 PWM (41.6 Kbaud)
- SAE J1850 VPW (10.4 Kbaud)
- ISO9141-2 (5 baud init, 10.4 Kbaud)
- ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
- ISO14230-4 KWP (fast init, 10.4 Kbaud)
- ISO15765-4 CAN (11bit ID, 500 Kbaud)
- ISO15765-4 CAN (29bit ID, 500 Kbaud)
- ISO15765-4 CAN (11bit ID, 250 Kbaud)
- ISO15765-4 CAN (29bit ID, 250 Kbaud)
4. Setup and Operating Instructions
4.1. Android Phone Bluetooth Communication
Supported Software: Torque, inCarDoc, CarScanner, MotorData OBD, DashCommand, OBD Car Doctor, Auto Doctor, MiniOBDI, EOBD, etc.
Steps:
- Download and install a diagnostic software on your Android phone (Torque, CarScanner, MotorData OBD are recommended).
- Ensure the DOIP ENET switch on the device is in the 'off' (popped up) state. Do not connect the Ethernet cable for phone-based diagnostics.
- Connect the GT327 device to your vehicle's OBD2 diagnostic interface. The device's voltage display screen will show the current voltage, and the power indicator light will turn on. If the voltage is below 11V, charge your car battery before proceeding.
- On your Android phone, go to Settings > Bluetooth, turn on Bluetooth, and search for devices. Select the Bluetooth name [OBD II].
- Enter the password 1234 or 0000 when prompted.
- Once successfully paired, open your chosen diagnostic software. Refer to the software's specific settings for configuration.
4.2. iPhone Bluetooth Communication
Supported Software: Free software like Car Scanner, FasLink X OBDII Scanner ELM327, and various paid applications. (Note: This device only supports Bluetooth; Wi-Fi or dedicated device software cannot be used.)
Steps:
- Download and install a diagnostic software on your iPhone (CarScanner and FasLink X are recommended).
- Ensure the DOIP ENET switch on the device is in the 'off' (popped up) state. Do not connect the Ethernet cable for phone-based diagnostics.
- Connect the GT327 device to your vehicle's OBD2 diagnostic interface. The device's voltage display screen will show the current voltage, and the power indicator light will turn on. If the voltage is below 11V, charge your car battery before proceeding.
- On your iPhone, go to Settings > Bluetooth and turn on Bluetooth. (Note: iPhones do not allow direct Bluetooth pairing for OBD devices from the system settings; pairing is done within the app).
- Open the settings within your diagnostic software on the iPhone. Select the OBDBLE Bluetooth name.
- Enter the password 1234 or 0000 when prompted.
- Refer to the recommended software matching settings video or the software's help section for specific configuration.
4.3. SUPER DOIP ENET Connection to Computer
This connection method is used for diagnostic programming and coding for BMW, Benz, Volkswagen, Audi, Land Rover, Bentley, Lamborghini, JAGUAR, VOLVO, and Geely vehicles that support DOIP protocol. (Software is not included with this product.)
Steps:
- Ensure the DOIP ENET switch on the GT327 device is in the 'on' (pushed in) state.
- Connect the GT327 device to your vehicle's OBD2 diagnostic interface.
- Connect one end of the provided Ethernet cable to the ENET interface on the GT327 device.
- Connect the other end of the Ethernet cable to your computer's Ethernet port.
- Launch your DOIP ENET compatible diagnostic software on the computer and follow its instructions for vehicle communication.
4.4. SUPER DOIP ENET Connection to Mobile Phone (with conversion cable)
For mobile phone diagnosis and programming of DOIP ENET vehicles, a separate conversion cable (network interface to mobile phone interface) is required. (This cable is not included.)
Steps:
- Ensure the DOIP ENET switch on the GT327 device is in the 'on' (pushed in) state.
- Connect the GT327 device to your vehicle's OBD2 diagnostic interface.
- Connect one end of the provided Ethernet cable to the ENET interface on the GT327 device.
- Connect the other end of the Ethernet cable to the network input of your conversion cable.
- Connect the mobile phone output of the conversion cable to your smartphone.
- Launch your DOIP ENET compatible diagnostic software on your smartphone and follow its instructions for vehicle communication.
5. Maintenance
- Keep the device clean and free from dust and debris. Use a soft, dry cloth for cleaning.
- Avoid exposing the device to extreme temperatures, direct sunlight, or high humidity.
- Do not drop or subject the device to strong impacts.
- Store the device in a dry, safe place when not in use.
- Do not attempt to open or modify the device, as this will void any warranty.
6. Troubleshooting
- Device Not Powering On: Ensure the device is securely connected to the vehicle's OBD2 port. Check the vehicle's battery voltage.
- Bluetooth Connection Issues: Make sure Bluetooth is enabled on your phone. Ensure the GT327 is within range. Try restarting both the device and your phone. Verify the correct Bluetooth name (OBD II or OBDBLE) and password (1234 or 0000).
- Software Not Detecting Device: Confirm the device is paired via Bluetooth (for phone) or connected via Ethernet (for PC). Check the software's settings to ensure the correct communication interface is selected.
- Low Voltage Alarm: If the device alarms (voltage below 11V), immediately stop diagnosis/programming and charge your vehicle's battery. Do not proceed with operations until the battery is adequately charged.
- ENET Connection Problems: Ensure the DOIP ENET switch is in the correct position for computer connection. Verify the Ethernet cable is securely connected to both the GT327 and the computer.
7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | GODIAG |
| Model Name | HKSP545 (GT327) |
| Hardware Version | GT327 |
| Software Version | jumper |
| Special Features | Bluetooth |
| Voltage | 12V (Supports 9-30V input) |
| Power (W) | 8W |
| Item Weight | 0.1 kg |
| Item Length | 18 cm |
| Item Width | 8 cm |
| Item Height | 2 cm |
| Origin | Mainland China |
| Batteries Included | No |
| Use | Not Telecommunication |
| Electronic | No |
| High-concerned chemical | None |
| Package Weight | 0.2 kg |
| Package Dimensions (L x W x H) | 18 cm x 8 cm x 2 cm |
8. User Tips
- Always ensure your vehicle's battery is in good condition and fully charged before performing any diagnostic or programming tasks to avoid interruptions or potential damage.
- When using phone applications, try a few different recommended apps to find the one that best suits your needs and vehicle.
- For complex programming tasks, it is often best to use a stable computer connection rather than a mobile device.
- Keep the device's firmware updated if updates become available from the manufacturer to ensure compatibility and optimal performance.
9. Warranty and Support
For technical support, warranty information, or further inquiries, please contact GODIAG directly:
- Website: www.godiag.com
- Phone: +86 18813687743
- Email: Sales@GoDiag.com
An electronic version of this user manual is also available in PDF format for download:
- User Manual (PDF): Download PDF Manual
