SHIDU S611

Contents

SHIDU 10W Portable Bluetooth Wireless Voice Amplifier

Model: S611

Brand: SHIDU

Introduction

Thank you for choosing the SHIDU S611 Portable Voice Amplifier. This device is designed to amplify your voice clearly and effectively, making it ideal for teachers, presenters, coaches, and anyone who needs to project their voice to a group. It features UHF wireless microphone technology, multiple audio input options, and a compact, portable design.

Please read this user manual carefully before using the product to ensure proper operation and to maximize its lifespan.

Important Safety Precautions

  • Before turning on the amplifier, ensure that the microphone is not pointed directly at the amplifier to prevent howling.
  • For optimal amplification, aim the headset microphone capsule towards your mouth when speaking.
  • Maintain a distance of more than 60 cm between the voice amplifier and the microphone to avoid howling.
  • Avoid exposing the device to extreme temperatures, direct sunlight, or humid environments.
  • Do not attempt to disassemble or repair the device yourself. Contact customer support if issues arise.

Package Contents

Please check the package for the following items:

  • 1 x SHIDU S611 Voice Amplifier
  • 1 x UHF Wireless Microphone (Headset)
  • 1 x Waistband
  • 2 x USB Charging Cables
  • 1 x User Manual (this document)
Image showing the SHIDU S611 Voice Amplifier, wireless microphone, waistband, two charging cables, and user manual laid out on a surface.
Package contents of the SHIDU S611 Voice Amplifier.

Controls and Ports Overview

Familiarize yourself with the amplifier's controls and ports:

Rear view of the SHIDU S611 Voice Amplifier, showing the belt clip, DC 5V charging port, USB port, MIC input, and ON/OFF/Volume knob.
Rear view of the amplifier with labeled ports.
  • Digital Display: Shows time, mode, and battery status.
  • Previous Button (◀◀): Short press for previous song; long press for fast rewind.
  • Mode Button (M): Short press to switch between TF card, USB flash drive, and UHF modes. Long press in UHF mode to enter pairing status.
  • Play/Pause Button (►►): Short press to play/pause; long press for single repeat (LCD shows "ONE"), long press again for all repeat (LCD shows "ALL").
  • Next Button (▶▶): Short press for next song; long press for fast forward.
  • ON/OFF/Volume Control Knob: Rotate to turn on/off and adjust volume.
  • DC 5V Mini-USB Port: For charging the amplifier.
  • USB Port: For USB flash drive music playback.
  • MIC Jack: For wired microphone input.
  • TF Card Slot: For TF card music playback.
  • Belt Clip: Located on the back for easy attachment.

Technical Specifications

Infographic showing dimensions (180x88x37mm) and key features: UHF Wireless, Signal Through Wall, 2000mAh battery, Noise Reduction, 12H Playtime, TF Card support, U Disk support, Multiple Audio Inputs.
Dimensions and key features.
Parameter Value
Max Output Power 10W
Frequency Response 90Hz-18KHz
Dimensions (WxHxD) 108*88*37mm
Weight 251g
Material ABS
Battery Included Yes
Amplifier Battery Life (50% volume) 12-18 hours
Music Play Time 6-8 hours
Amplifier Charging Time 3-5 hours
Wireless Microphone Battery Capacity 550mAh
Wireless Microphone Working Time 3-5 hours
Wireless Microphone Charging Time 3 hours
Wireless Distance 35m
Working Temperature -10°C to 45°C
Charging Voltage DC5V, 500mA
Support MP3 Yes
Certification CE

Setup Guide

1. Charging the Amplifier

When the battery symbol on the LCD screen flashes, it indicates low power. Please charge the amplifier using the provided Mini-USB cable and a DC 5V output adapter (not included). The battery symbol will flash during charging and stop flashing when fully charged. It is recommended to fully charge the amplifier before its first use.

Video demonstrating various features including charging the amplifier.

2. Charging the UHF Wireless Microphone

The blue indicator light on the wireless microphone will flash when its battery is low. Turn off the microphone and charge it using a Micro USB cable (one of the provided cables) with a DC 5V 500mA+ adapter. The red indicator light will be solid during charging and will turn off when fully charged.

Diagram illustrating how to wear the UHF wireless microphone, along with its charging specifications (550mAh, 3 hours charging, 3-5 hours working time).
UHF Wireless Microphone wearing and charging instructions.

3. Pairing the UHF Wireless Microphone

The wireless microphone and amplifier are factory-paired. If there is no sound from the microphone or it becomes disconnected, follow these steps to manually pair:

  1. Step 1: Turn on the amplifier and switch it to UHF mode. The LCD screen will display the "UHF" icon.
  2. Step 2: Long press the "M" key on the amplifier for 5 seconds. The "UHF" icon on the display will start flashing.
  3. Step 3: Turn on the wireless microphone and long press its power key for 5 seconds. The "UHF" icon on the amplifier's display will stop flashing, indicating successful pairing.

4. Wearing the Microphone and Amplifier

  • Attach the amplifier to your belt or pocket using the built-in clip.
  • Alternatively, use the provided lanyard to wear the amplifier around your neck.
  • Wear the headset microphone comfortably, ensuring the microphone capsule is positioned near your mouth for optimal voice pickup.
Front view of the SHIDU S611 Voice Amplifier with headset microphone, showing its compact design.
The SHIDU S611 Voice Amplifier with headset microphone.

Operation

1. Voice Amplification

  1. Turn on the amplifier by rotating the ON/OFF/Volume knob clockwise.
  2. Ensure the wireless microphone is powered on and paired (see Setup Guide).
  3. Speak into the microphone. Your voice will be amplified through the speaker.
  4. Adjust the volume using the ON/OFF/Volume knob on the amplifier or the +/- buttons on the wireless microphone.
Promotional image of a teacher using the voice amplifier, highlighting 10W output power and 2000mAh large rechargeable battery.
Teacher demonstrating the use of the voice amplifier.

2. Music Playback (TF Card / USB Flash Drive)

  1. Insert a TF card (up to 32GB) or a USB flash drive into the corresponding slot on the amplifier.
  2. Short press the "M" button to switch to the audio (MP3) mode. The LCD will display the track number and time.
  3. Use the "◀◀" and "▶▶" buttons to navigate between songs.
  4. Short press the "►►" button to play or pause.
  5. Long press the "►►" button once for single song loop (LCD shows "ONE"). Long press again for all songs loop (LCD shows "ALL").

3. Bluetooth Mode

  1. Turn on the amplifier.
  2. Short press the "M" button until the LCD displays "BLUE" (Bluetooth mode).
  3. On your mobile device, enable Bluetooth and search for available devices.
  4. Select "S611" from the list to pair. Once connected, you can play audio from your device through the amplifier.

4. FM Radio Mode

  1. Turn on the amplifier.
  2. Short press the "M" button to cycle through modes until you reach FM radio mode (indicated by frequency on the display).
  3. Use the "◀◀" and "▶▶" buttons to tune to different radio stations.

Maintenance

  • Clean the amplifier and microphone with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
  • If the device will not be used for an extended period, charge it fully every 3 months to maintain battery health.
  • Avoid dropping or subjecting the device to strong impacts.

Troubleshooting

Problem Possible Cause Solution
Amplifier has no sound after turning on.
  • Low battery.
  • Volume too low.
  • Charge the amplifier.
  • Turn up the volume on the amplifier.
Wireless microphone has no sound.
  • Microphone not powered on.
  • Microphone not paired with amplifier.
  • Microphone volume too low.
  • Ensure microphone is powered on.
  • Re-pair the UHF microphone (see Setup Guide).
  • Adjust microphone volume using +/- buttons.
Voice amplifier produces distinct howling.
  • Microphone pointed at amplifier.
  • Volume too high in a small room.
  • Wear the microphone correctly, ensuring it's not facing the amplifier.
  • Reduce the volume to an appropriate level for the room size.

User Tips

No specific user tips were available from provided reviews or Q&A. However, general advice for voice amplifiers includes:

  • Positioning: Experiment with microphone placement for the clearest sound and to minimize feedback.
  • Battery Management: Fully charge both the amplifier and microphone before important events to ensure uninterrupted use.
  • Volume Control: Adjust volume gradually to avoid sudden loud noises or feedback.
  • Versatility: Utilize the various input modes (Bluetooth, AUX, TF/USB) for playing background music or other audio alongside your voice.

Warranty and Support

SHIDU offers a 1-year warranty for this product. For any questions, technical support, or warranty claims, please contact SHIDU customer service. You can find more information on their website or via email:

Additional Resources

A detailed user manual in PDF format is available for download. This PDF contains comprehensive diagrams and instructions for your SHIDU S611 Voice Amplifier.

You can access the official PDF manual here: SHIDU S611 User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.