XinYi Sini Audio XY-ST21PRO

Contents

XY-ST21PRO 2.1 Channel Bluetooth Digital Amplifier Board

User Instruction Manual

XY-ST21PRO Amplifier Board and Components

Figure 1: XY-ST21PRO Amplifier Board and Included Components

1. Introduction

The XY-ST21PRO is a high-power 2.1 channel Bluetooth digital amplifier board designed for audio enthusiasts. It features dual TPA3221 chips, providing stable high power output of 100W + 100W + 200W. The board incorporates dedicated inductors for high current, low magnetic loss, and effective electromagnetic interference resistance. It supports multiple audio inputs including Bluetooth, AUX, and USB flash drive/sound card, offering versatile connectivity and high-quality sound reproduction with independent tuning capabilities for various frequencies.

2. Safety Information

  • Ensure the power supply matches the specified voltage range (DC12-30V) and current (5A or above) to prevent damage.
  • Avoid short circuits between output terminals or with the power supply.
  • Do not operate the amplifier in wet environments or expose it to liquids.
  • Ensure proper ventilation around the heat sink to prevent overheating.
  • Disconnect power before making any wiring changes or maintenance.
  • WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

3. Package Contents

Please check the contents of your package upon receipt. The exact contents may vary based on the kit version purchased.

  • XY-ST21PRO Amplifier Board (1)
  • Shell Kit (if purchased with case option)
  • Lead Wires for Potentiometers (5, if purchased with external potentiometer option)
  • Screwdriver (1)
  • Mounting Screws and Standoffs
  • Control Knobs

Note: The shipment does not include power adapters or audio cables.

XY-ST21PRO Exploded View

Figure 2: Exploded View of Amplifier Board and Case Components

4. Setup Instructions

4.1 Assembly (If Applicable)

The product is not assembled for delivery. The parts need to be assembled by yourself. Refer to the following images for different configurations:

  • Without Case: The amplifier board as a standalone module.
  • With Case: Assemble the provided shell kit around the amplifier board.
  • External Potentiometer Version: Connect the potentiometers to the board using the provided lead wires.
Amplifier Board Without Case Amplifier Board With Case

Figure 3: Amplifier Board Without Case (Left) and With Case (Right)

Amplifier Board with External Potentiometers

Figure 4: Amplifier Board with External Potentiometers Connected

Dimensions of Amplifier Versions

Figure 5: Dimensions of Integrated Potentiometer, External Potentiometer, and Integrated Panel Versions

4.2 Wiring Diagram

Follow the detailed wiring guide below for proper connection of power, speakers, and audio sources.

Accurate Wiring and Function Guide

Figure 6: Accurate Wiring and Function Guide

  1. Power Supply: Connect a DC12-30V power supply (5A or above) to the 5.5-2.5MMDC block or terminal labeled 'POWER DC:12-30V'.
  2. Speaker Connections: Connect your right channel speaker to the 'R+' and 'R-' terminals, and your left channel speaker to the 'L+' and 'L-' terminals.
  3. Subwoofer Connection: Connect your subwoofer to the 'S+' and 'S-' terminals.
  4. Audio Inputs:
    • AUX Input: Connect an external audio device via the 'AUX IN' jack.
    • USB Audio/U Disk: Insert a USB flash drive or connect a device for USB sound card functionality to the 'USB AUDIO' port.
    • Bluetooth: The board has an integrated Bluetooth module.
  5. Bluetooth Antenna: The board comes with its own onboard antenna, providing a normal range of 10-15 meters. For extended range (20-30 meters) or if installed in a metal casing (which shields the signal), an external 2.4G antenna can be connected to the welded IPEX interface. Customers need to purchase external 2.4G antennas (antenna extension cords, antenna rods) separately.
Bluetooth Antenna Interface

Figure 7: Bluetooth Antenna IPEX Interface

5. Operating Instructions

  1. Power On/Off: Use the 'POWER ON OFF' switch to turn the amplifier on or off.
  2. Input Selection: The amplifier automatically detects and switches between Bluetooth, AUX, and USB inputs. The corresponding indicator lights (USB playback, AUX playback, BT playback) will illuminate.
  3. Volume Controls:
    • SUB-VOL: Adjusts the volume of the subwoofer.
    • L&R VOL: Adjusts the master volume for the left and right channels.
  4. Tone Controls:
    • SUB-FREQ: Adjusts the cutoff frequency for the subwoofer.
    • L&R BASS: Adjusts the bass level for the left and right channels.
    • L&R TREBLE: Adjusts the treble level for the left and right channels.
  5. Bluetooth Pairing: When in Bluetooth mode, the amplifier will be discoverable. Search for 'XY-ST21PRO' on your device and pair.
  6. USB Playback Control: (Refer to Figure 6 for button location)
    • Click: Pause/Play.
    • Double Click: Next track.
    • Three Strikes (Triple Click): Previous track.
    • Four Hits (Quadruple Click): Mode switch (e.g., EQ mode).
    • Press and Hold: Power on/off (if the main switch is not used, or for soft power control).

6. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the amplifier board and case. Avoid using liquid cleaners or solvents.
  • Ventilation: Ensure the heat sink is free from dust and obstructions to maintain optimal cooling.
  • Storage: Store the amplifier in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods.

7. Troubleshooting

Problem Possible Cause Solution
No power/No indicator lights Incorrect power supply voltage/current; loose power connection; power switch off. Verify power supply (DC12-30V, 5A+); check power cable connection; ensure power switch is ON.
No sound output Loose speaker connections; incorrect audio input selected; volume too low; faulty audio source. Check all speaker wires; ensure correct input is active; increase L&R VOL and SUB-VOL; test with a different audio source.
Bluetooth connection issues Device too far; interference; amplifier not in pairing mode; external antenna not connected (if needed). Move device closer; reduce interference; ensure amplifier is discoverable; connect external antenna if using a metal case or for longer range.
Distorted sound Input signal too high; speaker impedance mismatch; insufficient power supply; faulty speakers. Reduce input volume from source; ensure speakers match impedance (4Ω or 8Ω); use a stable power supply; test with different speakers.
Amplifier shuts down Overheating; overcurrent; short circuit; input undervoltage. Check for proper ventilation; verify speaker wiring for shorts; ensure power supply is stable and sufficient; allow amplifier to cool down.

The amplifier is equipped with protection mechanisms for input undervoltage, input anti-reverse connection, overheating, overcurrent, and short circuit. If a protection mechanism is triggered, the amplifier may temporarily stop functioning. Address the underlying issue before resuming operation.

8. Specifications

Feature Specification
BrandXinYi Sini Audio
ModelXY-ST21PRO
Power SupplyDC12-30V / 5A or above
DC Seat5.5-2.5mm
Bluetooth Version5.2
Audio InputBluetooth + AUX + USB Flash Drive / Sound Card
Bluetooth Audio DecodingAAC SBC
USB Audio FormatsWAV FLAC APE MP3
Left & Right Channel Output Power10W+10W @ 8Ω/12VDC; 20W+20W @ 4Ω/12VDC; 35W+35W @ 8Ω/24VDC; 70W+70W @ 4Ω/24VDC; 60W+60W @ 8Ω/30VDC; 100W+100W @ 4Ω/30VDC
Subwoofer Output Power10W @ 8Ω/12VDC; 20W @ 4Ω/12VDC; 35W @ 8Ω/24VDC; 70W @ 4Ω/24VDC; 60W @ 8Ω/30VDC; 100W @ 4Ω/30VDC; 200W @ 2Ω/30VDC
Product Size (Without Casing)Approx. 111 x 100 x 23mm (4.37 x 3.94 x 0.91in)
Product Size (With Shell)Approx. 112 x 102 x 28mm (4.41 x 4.02 x 1.10in)
Potentiometer Connection Wire LengthApprox. 20cm
Product Specifications Table

Figure 8: Product Specifications Summary

9. User Tips

  • Power Supply Quality: Using a high-quality, stable power supply with sufficient current (5A or more) is crucial for optimal performance and to prevent distortion, especially at higher volumes.
  • Speaker Matching: Ensure your speakers' impedance (typically 4Ω or 8Ω) matches the amplifier's capabilities to prevent damage and achieve the best sound.
  • Cable Management: Use shielded audio cables to minimize interference and keep power and audio cables separated where possible.
  • Heat Management: While the amplifier has a large heat sink, ensure it's not enclosed in a way that restricts airflow, especially during prolonged high-power operation.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your seller or the manufacturer directly. Keep your purchase receipt as proof of purchase.

A detailed user manual in PDF format may be available for download. Please check the seller's product page for the latest documentation: View User Manual (PDF).

© 2024 XinYi Sini Audio. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.