SEAMETAL D40792

Contents

SEAMETAL LED Car Door Opening Warning Atmosphere Light User Manual

Model: D40792 | Brand: SEAMETAL

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your SEAMETAL LED Car Door Opening Warning Atmosphere Light. This product is designed to enhance vehicle safety by providing illumination and warning signals when car doors are opened, and to add ambient lighting to your vehicle's interior.

The device features infrared induction for automatic operation, multiple lighting modes, and a magnetic attachment system for easy installation and charging.

Setup and Installation

Before installation, ensure the surface is clean and dry. The lights are designed for easy magnetic attachment and removal for charging.

1. Charging the Device

The lights are rechargeable via USB. Before first use, fully charge the device. The magnetic design allows for convenient removal for charging.

SEAMETAL LED light being charged via USB cable

Image: The LED light connected to a USB charging cable, ready to be picked up and placed for charging.

2. Installation Methods

The SEAMETAL LED Car Door Light offers two primary installation methods:

  1. For Iron Surfaces: The device has built-in strong magnets for direct adsorption and fixation. Simply place the light on any suitable iron surface on your car door.

    Hand placing SEAMETAL LED light onto a car door with strong magnetic adsorption

    Image: Demonstrates strong magnetic adsorption for easy access and charging.

  2. For Non-Ferrous Surfaces: If your car door surface is not magnetic, use the provided adhesive iron sheet. Peel off the backing from the adhesive iron sheet and stick it to the desired location. Then, the LED light can magnetically attach to this iron sheet.

    Diagram showing magnetic installation for iron and non-ferrous surfaces

    Image: Diagram illustrating installation on iron surfaces (built-in magnet) and non-ferrous surfaces (using an adhesive magnetic metal sheet).

3. Infrared Sensing Sticker Placement

For optimal automatic on/off functionality, an infrared sensing sticker is provided. This sticker helps the light detect when the door is closed. Remove the protective film from the sticker and align it with the position where the light will close against the car body.

Instruction diagram for infrared sensing sticker placement and light testing

Image: Step-by-step guide for tearing off protective film, aligning the infrared sensing sticker, and testing the lamp.

Important: When testing the lamp, do not cover the sensing area. For accurate testing of the automatic shut-off feature, test the lamp in a dark place. The bright areas will automatically turn off during testing if the sensing area is properly aligned and covered by the door when closed.

Double-sided adhesive installation steps for the light

Image: Visual guide for applying the double-sided adhesive for installation.

Ensure the light is placed in a position that does not interfere with the car door's closing mechanism. A remaining distance of approximately 1-2cm is ideal.

SEAMETAL LED light installed on a car door, showing compact fit and remaining distance

Image: The light's mini and compact design ensures it does not affect the door switch, with an approximate 1-2cm remaining distance.

Operating Instructions

The SEAMETAL LED Car Door Light is designed for both safety and aesthetic purposes.

1. Power On/Off and Mode Switching

The device features a button for control:

  • Power On/Mode Switch: Click the button once to turn on the light and cycle through different lighting modes.
  • Power Off: Long press the button to shut down the device.
Close-up of the SEAMETAL LED light showing the power/mode button

Image: The button on the device allows for power on/off and switching between colorful, breathing, monochrome, and flash modes.

2. Automatic Operation

The light utilizes infrared induction to automatically turn on when the car door is opened and turn off when the door is closed. This provides immediate illumination and a warning signal.

Video: Demonstration of the infrared induction door lighting, showing automatic on/off with door movement, various color modes (breathing, monochrome), and installation steps.

  • Door Opening Illumination: When the door is opened, the light illuminates the ground, helping you avoid stepping into puddles or uneven surfaces.
  • Car door open with LED light illuminating the ground

    Image: The light illuminates the ground when the door is open, preventing accidental missteps.

  • Warning Mode: The light can flash to warn other vehicles and pedestrians of an open car door, enhancing safety.
  • Car door open with flashing LED warning light

    Image: The light flashes to provide a warning for vehicles and pedestrians after opening the door.

3. Lighting Modes

The device supports various lighting modes, including:

  • Colorful/Breathing Mode: Cycles through different colors with a gradual fade effect.
  • Monochrome Mode: Displays a single, static color.
  • Flash Mode: Provides a rapid flashing light, ideal for warning.
SEAMETAL LED lights displaying various colors on car doors

Image: Overview of the product showing different color options for the atmosphere light.

4. Light Sensor Functionality

The integrated light sensor ensures the device only activates in dark conditions, conserving battery life. It will not turn on during the day.

Maintenance

  • Charging: Recharge the device using a standard USB cable when the battery is low. The magnetic attachment allows for easy removal for charging.
  • Cleaning: Wipe the surface of the light with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
  • Storage: If storing the device for an extended period, ensure it is fully charged and stored in a cool, dry place.

Troubleshooting

ProblemPossible CauseSolution
Light does not turn on during the day.Integrated light sensor prevents activation in bright conditions.This is normal operation. The light is designed to only activate in dark environments to conserve battery.
Light does not turn off when the door is closed.The infrared sensing area is not properly aligned or is obstructed.Ensure the infrared sensing sticker is correctly aligned with the light's sensing area and that nothing is blocking it when the door is closed. Re-adjust the sticker or light position if necessary.
Light falls off or moves easily.Weak magnetic attachment or improper surface preparation.Clean the installation surface thoroughly. If using the adhesive iron sheet, ensure it is firmly attached. For stronger hold, consider reinforcing the magnetic attachment with additional adhesive if needed.
Product stopped working after a short period.Battery drained, internal fault, or physical damage.Ensure the device is fully charged. If charging does not resolve the issue, contact customer support for assistance.
Cannot close car door after installation.Insufficient gap between car door and frame.The product is designed to be compact, but some car models may have very tight clearances. Ensure there is at least 1-2cm of space. If not, the product may not be suitable for your specific car door.

Specifications

FeatureDetail
Model NameD40792
Brand NameSEAMETAL
Item TypeCar Door Lights
UseFor Car door Lighting
Wattage5W
VoltageUniversal (Others)
For Vehicle Brands/ModelUniversal
OriginMainland China
Package Length12 cm
Package Width6 cm
Package Height2 cm
Package Weight0.054 kg

User Tips

  • Daylight Sensor: Don't be alarmed if the light doesn't turn on during the day; it's designed to only activate in dark conditions to save battery. Test it in the evening or a dark area.
  • Door Gap Check: Before permanent installation, verify that there is sufficient clearance (approx. 1-2 cm) between your car door and the frame to ensure the light does not obstruct door closure.
  • Magnet Reinforcement: If the magnetic attachment feels loose, consider adding a small amount of extra adhesive to the magnetic sheet for a more secure fit.
  • Infrared Sticker Care: The infrared sensing stickers are crucial for automatic on/off. Handle them carefully during installation, especially in windy conditions, as they can be difficult to replace.
  • Versatile Use: While primarily for car doors, these lights can also be used for interior cabin lighting or as a comforting night light for children in the car, thanks to their portable and rechargeable design.

Warranty and Support

For specific warranty information and support, please refer to the seller or the official product page. If you encounter any issues or have questions, it is recommended to contact the seller directly for assistance.

A detailed user manual in PDF format is also available for download: User Manual (PDF).

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.