1. Product Overview
The WESA EP-03-BM is a wall-embedded EU standard power socket designed for residential and general-purpose applications. It features a durable, flame-retardant plastic construction with a decorative wooden spray paint finish. This non-grounding socket is rated for 16A at 220V and meets CE, RoHS, and WEEE certifications.

Figure 1: WESA Wooden Power Socket (Front View)
2. Safety Information
- Always turn off the main power supply at the circuit breaker before attempting any installation or maintenance.
- Installation should only be performed by a qualified electrician or a person with adequate knowledge of electrical wiring.
- Do not exceed the rated current (16A) or voltage (220V) of the socket.
- This product is designed for indoor use only.
- Keep away from water and excessive moisture.
- The socket is constructed from high-temperature flame-retardant material to prevent fire hazards.

Figure 2: High Temperature Flame Retardant Material
3. Installation (Setup)
This socket is designed for wall-embedded installation. Ensure you have the necessary tools (screwdriver, wire strippers, voltage tester) and follow local electrical codes.
- Turn off Power: Locate the circuit breaker for the area where you will install the socket and turn off the power. Verify with a voltage tester that the power is off.
- Prepare the Wall Box: Ensure you have a standard wall box suitable for an 83mm x 83mm socket.
- Wire Connection:
- Carefully strip about 10-12mm of insulation from the live (brown/red) and neutral (blue/black) wires.
- Connect the live wire to the 'L' terminal and the neutral wire to the 'N' terminal on the back of the socket. This is a non-grounding socket, so there is no ground terminal.
- Ensure all connections are secure and no bare wires are exposed outside the terminals.
- Mount the Socket:
- Gently push the wired socket into the wall box, ensuring wires are not pinched.
- Secure the socket to the wall box using the mounting screws provided (or existing screws in the wall box). The standard mounting screw distance is 58mm (2.28in).
- Attach the decorative front plate.
- Restore Power: Once the socket is securely installed, turn the power back on at the circuit breaker.
- Test: Test the socket with a known working appliance.

Figure 3: Product Dimensions and Back View for Installation. Front: 83mm x 83mm (3.26in x 3.26in). Mounting Screw Distance: 58mm (2.28in). Total Depth: 39mm (1.53in). Mounting Depth: 34mm (1.33in).
4. Operation
The WESA EP-03-BM power socket is designed for straightforward use:
- Insert any EU standard plug into the socket.
- Ensure the appliance connected does not exceed the socket's maximum rated current of 16 Amperes.
- This socket operates at 220 Volts.
- There are no indicator lights or backlights on this model.
The socket can be installed in various indoor environments such as bedrooms, living rooms, kitchens, and bathrooms (ensure compliance with local regulations for bathroom electrical installations).

Figure 4: Versatile Application in Different Rooms
5. Maintenance
The WESA power socket requires minimal maintenance:
- Cleaning: To clean the surface, gently wipe with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the finish or internal components.
- Durability: The socket features a firm shell and is designed with anti-drop and impact resistance for long-lasting performance.
- Inspection: Periodically inspect the socket for any signs of damage, loose connections, or discoloration. If any issues are found, turn off the power and consult a qualified electrician.

Figure 5: Firm Shell with Anti-Drop and Impact Resistance
6. Troubleshooting
If you encounter issues with your power socket, consider the following:
- No Power:
- Check if the circuit breaker for that area has tripped. Reset it if necessary.
- Ensure the appliance you are trying to power is working correctly by testing it in another known-good outlet.
- Verify that the socket is properly wired and connections are secure (only if you are qualified and have turned off the main power).
- Loose Plug: If plugs feel loose in the socket, it may indicate wear. For safety, consider replacing the socket.
- Overheating/Burning Smell: Immediately turn off power at the circuit breaker. Do not use the socket. This indicates a serious electrical fault and requires immediate inspection by a qualified electrician.
For any electrical issues beyond basic checks, always consult a qualified electrician.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | WESA |
| Model Number | EP-03-BM |
| Material | Plastic (High Temperature Flame Retardant) |
| Socket Type | EU Standard, 220V |
| Rated Current | 16A |
| Installation Type | Wall Embedded |
| Grounding | Non-Grounding |
| Standard Size (Front) | 83mm x 83mm (3.26in x 3.26in) |
| Total Depth | 39mm (1.53in) |
| Mounting Depth | 34mm (1.33in) |
| Mounting Screw Distance | 58mm (2.28in) |
| Certification | CE, RoHS, WEEE |
| Is Smart Device | No |
| Backlight/Indication | Not applicable |
| Shape | Square |
| Application | Residential / General-Purpose |
| Origin | Mainland China |
8. User Tips
- For a clean aesthetic, ensure the wall surface is smooth before installation.
- When cleaning, a slightly damp cloth can be used for stubborn marks, but always ensure the socket is completely dry before restoring power.
9. Warranty and Support
For warranty information, technical support, or any product-related inquiries, please contact your original point of purchase or the seller directly.
An additional user manual in PDF format may be available for more detailed information: View User Manual (PDF)