1. Introduction and Function
The Sunster 8KW Diesel Air Heater is designed to prevent damage to vehicles caused by sudden temperature drops, improve interior temperature, and preheat engine coolant to avoid wear at low temperatures. It facilitates vehicle interior thawing, quick starting, and defrosting of car glass.
2. Internal Structure
The heater's internal components work together to provide efficient heating. Key parts include:
- Control Box: Manages the heater's operations.
- Ignition Plug: Initiates the combustion process.
- Air Inlet & Air Outlet: For air circulation.
- Flame Retardant Impeller & Air Fan: Ensures safe and efficient airflow.
- Combustion Chamber: Where diesel fuel is burned to generate heat.
- Heating Zone: Transfers heat to the circulating air.
- Safety Plug: For electrical safety.
- Oil Injection Hole: For adding fuel.
- 5L/1.3GAL Oil Tank: Stores diesel fuel.
- Terminal Design: For electrical connections.


3. Installation
3.1. Safety Precautions
WARNING: Carbon Monoxide Hazard! This heater produces carbon monoxide, which is an odorless, colorless gas that can cause serious injury or death. Always ensure adequate ventilation when operating the heater. Never operate the heater in enclosed spaces without proper exhaust ventilation to the outside. Ensure the exhaust pipe is securely installed and routed away from the living space. Regularly check for leaks and proper functioning of the exhaust system. Do not use this heater as a primary heating source in residential areas without professional installation and carbon monoxide detection.
3.2. Package Contents
Before installation, verify that all components are present:

- Air Diesel Heater Unit
- Power Adapter (AC110-240V)
- Remote Control
- Battery Power Cord (DC12V/24V)
- Air Filter
- Fixed Plate
- Manual
- Air Outlet Pipe
- Intake Pipe
- Exhaust Pipe
- Connection Holder
- Fixture Accessories Set (screws, clamps)
- Silencer
3.3. Installation Positions
The heater can be installed in various locations depending on the vehicle type:
- TRUNCK: On the co-driver's legroom, on the back wall of the cab, driver's seat backrest, or within the tool box.
- RV: In front of the passenger seat, between the driver seat and passenger seat, under the container, or in the trunk.
- 5 Seater/7 Seater: Primarily in the passenger or baggage room. If not possible, fix under the vehicle, but beware of splashing.
- Excavator: Inside the driver's seat, on the back wall of the cab, or inside the protection box.

3.4. Installation Diagram
Follow this diagram for proper assembly and connection of the heater components:

4. Control Panel & Remote Control
The heater features an intelligent LCD panel and a remote control for convenient operation. Two main models are available: S-A2105L and S-A2302B, both using 2*CR2025 batteries for the remote.

4.1. Overall Display
- Off button: Turns the unit off.
- Knob: Used for gear/temperature/item adjustment.
- M button: Mode switch/setting key.
- Screen Display Area: Shows current settings and information.
4.2. Operating Modes
- Manual Mode: Adjust the heating gear from 1 to 10.
- Automatic Mode: Set the desired temperature between 8°C and 36°C. The heater will automatically adjust its running gear based on the cab temperature to quickly reach and maintain the set temperature, operating more intelligently and economically.
- Fault Display: In case of a fault, an error code will flash on the display window for easier troubleshooting.
4.3. Instructions
- On/Off: Press the knob to turn on when the machine is off; press it again to turn off when the machine is on.
- Mode Switching: Press the [M] button to switch between constant temperature mode and gear mode.
- Gear/Temperature Adjustment: Rotate the knob clockwise to increase gear/temperature (+1 unit, up to 10 gears/36°C). Rotate counter-clockwise to decrease gear/temperature (-1 unit, minimum 1 gear/8°C).
- Time Setting: In power-on state, the screen displays current time. Long press the [M] key for 3 seconds to enter time setting mode.
- Item 1: Set current time (press [M] to set, use knob to switch).
- Item 2: Set automatic start time (same method as above).
- Item 3: Set running time after automatic startup (0.5 hours per unit).
- Item 4: ON/OFF setting for auto-start function. Alarm clock icon appears when active.
- Engineering Mode: Press the knob for 5 seconds simultaneously to enter engineering mode. Rotate the knob to adjust the item to view data such as:
- Heater main board version number
- Fault code
- Shell temperature
- Supply voltage
- Heater running gear
- Cab temperature
- Altitude
- Remote Control Matching: In power-on state, press and hold the knob for 3 seconds. The screen displays 'P-1'. Press any button on the remote control. If successful, the interface will automatically exit.
- Language Switching: Press and hold the [M] button and knob for 3 seconds simultaneously in power-on state. Cycles through English, German, Russian, and Voice off.
- Oil Pumping Mode (Manual Pump Oil): Long press the knob for 5 seconds when powered on and turned off for the first time. The screen flashes and shows a 300-second countdown. Wait for the countdown to end or press the knob to end pumping oil. This is useful for priming the fuel system.
5. Bluetooth App Control
The Sunster heater can be controlled via a mobile app for enhanced convenience. The app is called "Sunster Smart Mobility" and can be found by searching "sunster" in your device's app store (App Store for iOS, Google Play for Android).
5.1. App Download and Installation
- For iOS: Scan the QR code or search 'AirHeaterBLE' in the App Store.
- For Android: Scan the QR code to download from Google Play.


Note for Android users: If you upgrade your Android phone to s23ultra or the latest version, the app might close or become unusable. If re-downloading from Google Play doesn't solve the issue, try scanning the QR code again for a fresh download.
5.2. Bluetooth Connection Steps
- Query Bluetooth Name: After powering on, press the knob for 3 seconds. The screen will display the Bluetooth name (e.g., 'EdE8' or 'bLE' followed by a 6-digit character name). If it's a non-Bluetooth version, it will show "NULL". Press any key to exit.
- Connect to Mobile Phone: Open the Sunster app and turn on Bluetooth. Click the Bluetooth symbol in the upper right corner of the app. Search for the corresponding local Bluetooth number (BYD + MAC address of the Bluetooth device + 4 digits from the controller). Click on the Bluetooth number to connect.
- Operate Heater via App: Once connected, you can:
- Long press the power button in the app to turn the heater on/off.
- Click the settings button in the app to set language (English/Chinese), password, and save settings.
- Click the "mode" button to switch between gear mode and temperature control mode. Use "up +" / "down -" buttons to adjust the level (1-10) or temperature (8°C ~ 36°C).




6. Troubleshooting
When the heater fails, an error code (E-xx) will be displayed. Refer to the table below for fault types and solutions:
| Error Code | Type of Fault | Solution |
|---|---|---|
| E01 | Supply Voltage Overrun | Check battery output voltage: 9-16V for 12V heater, 18-30V for 24V heater. |
| E03 | Ignition Unit Fault | Check if the ignition plugin is disconnected. If not, replace it with a new one. |
| E04 | Pulse Pump Fault | Check if the pump plugin is disconnected. If not, replace it with a new one. |
| E05 | Overheating | Check if the air inlet and outlet are blocked. |
| E06 | Fan Fault | Check if the fan plugin is disconnected. If not, replace it with a new one. |
| E08 | Lack of Fuel | Check if the fuel tank is empty and add fuel. |
| E09 | Overheat Sensor Fault | Check if the sensor plugin is disconnected. If not, replace it with a new one. |
| E10 | Startup Failure | Check if the fuel tank is empty and add fuel, or check if the fuel pipe is blocked. |
7. Specifications
| Feature | Specification |
|---|---|
| Rated Power | 8KW |
| Working Voltage | DC12V or DC24V |
| Adapter Input | AC110-240V 50-60Hz |
| Fuel Type | Diesel |
| Startup Current | 13A |
| Rated Current | 3A |
| Tank Capacity | 5L / 1.3 gal |
| Fuel Consumption | 0.16-0.45 (l/h) |
| Remote Control Distance | 98 ft / 30 m |
| Radiator Working Temperature | -40~+50°C |
| Oil Pump Operating Temperature | -40~+40°C |
| Adjustable Temperature Range | 46℉-95℉ / 8℃-35℃ |
| Item Weight | 9 kg |
| Item Dimensions (L x W x H) | 38 cm x 25.5 cm x 27.5 cm |
| Material | Plastic + Carbon Fiber Look |
| External Testing Certification | CE |
| Special Features | Bluetooth APP Function, Automatic Start & Stop (constant temperature), Ventilation Function, Timer Switch, Temperature compensation, Temperature/Gear regulation, Display Altitude |
8. User Tips
- Manual Clarity: The instruction manual's English translation may be challenging. Refer to diagrams and videos for clearer understanding of installation and operation.
- Exhaust Pipe Length: Some users have found the supplied exhaust pipe to be short for their specific installations. Consider checking the required length for your setup and acquiring additional alloy piping if necessary.
- Heating Performance: The heater offers high heating capacity and is efficient, quickly warming spaces like sheds and RVs.
- Operational Noise: Be aware that the unit is not entirely silent and produces some operational noise.
- Power Output: While effective, some users report actual power output around 2500-3000 watts, which may differ from the stated 8KW.
9. Frequently Asked Questions (FAQ)
- Q: What is the diameter of the air outlet?
A: The exact diameter is not specified in the provided documentation. Please refer to the product packaging or contact support for precise measurements if you need to order vent ducting. - Q: What items are included in the delivery?
A: Please refer to the "Package Contents" section (Section 3.2) for a detailed list of all included parts.
10. Warranty and Support
10.1. Contact Support
For any questions or issues regarding your Sunster product, please contact us directly:
- Email: sunster202@163.com
We are committed to helping you resolve any problems as quickly as possible.
10.2. About Sunster
Sunster Official Store is the only authorized store selling 100% original and authentic products. We value your feedback and appreciate your kind support. If you are satisfied with our items, please leave a 5-star review on the website to help other customers.
