MatSee Plus PJ-1203A

Contents

MatSee Plus Tuya Smart Life ZigBee Energy Monitor User Manual

Model: PJ-1203A / PJ-1203AN

1. Introduction

The MatSee Plus Tuya Smart Life ZigBee Energy Monitor is designed to measure electricity consumption and generation in your home or office. It supports 1 or 2 channels and provides bidirectional current sensing, allowing you to monitor power usage and generation via the Tuya Smart or Smart Life application. This device requires a ZigBee gateway for proper functionality.

MatSee Plus ZigBee Energy Monitor with two current clamps
The MatSee Plus ZigBee Energy Monitor module with two current transformer clamps.

2. Safety Warnings

WARNING: Failure to follow these instructions may result in death, serious injury, fire, electric shock, or damage to property.

  • The power clamp must be installed and serviced only by qualified electrical personnel.
  • Do not touch the terminals of the device during testing.
  • Turn off all power supply for this equipment before installing.
  • Make sure that the power supply is off before connecting or disconnecting it to an auxiliary device.
  • Always use a properly rated voltage sensing device to confirm power is off.
  • Avoid high humidity or extreme temperatures.
  • Avoid long exposure to direct sunlight or strong ultraviolet light.
  • Do not drop or expose the unit to intense vibration.
  • Do not disassemble or try to repair the unit on your own.
  • Do not expose the unit or its accessories to flammable liquids, gases, or other explosives.
  • If you need to remove the current transformer clamp, be sure to turn off the power of the measuring device first, otherwise there is a risk of electric shock.
Danger Electric Shock Warning Symbol
Always ensure power is off before handling electrical components.

3. Specifications

Feature Specification
Input Voltage AC 100-240V 50/60Hz
Measuring Range 0.2-80A
Wireless Protocol ZigBee (2.4GHz)
Measurement Error Within ±2%
Module Size 50*45*23mm
Clamp Diameter 10mm
Clamp Cable Length 1m
Ambient Temperature Range -10°C to +55°C
Compatibility Tuya Smart, Smart Life (requires Tuya ZigBee Gateway)
Certification CE, RoHS
Channel Option 1 or 2 Channels
Direction Bidirectional

4. Setup

4.1 Unpacking

Carefully unpack the energy monitor and its components. Ensure all parts are present:

  • ZigBee Energy Monitor Module
  • Current Transformer (CT) Clamps (1 or 2 depending on model)
  • DIN Rail Mounting Accessory (optional)
  • Instruction Sheet
Product packaging and contents
Verify all components are included in the package.

4.2 App Download

To use the energy monitor, you need to download the 'Smart Life' or 'Tuya Smart' application on your smartphone or tablet.

  1. Scan the QR code provided in the instruction sheet or search for 'Smart Life' or 'Tuya Smart' in your device's App Store (iOS) or Google Play Store (Android).
  2. Install the application.
  3. Register or log in to your account.
QR codes for Smart Life and Tuya Smart apps
Scan the QR codes to download the Smart Life or Tuya Smart app.

4.3 Wiring Diagram & Installation

IMPORTANT: Ensure the main power supply is OFF before performing any wiring. Installation should only be performed by a qualified electrician.

The energy monitor is designed for 35mm DIN rail mounting. Attach the module to a DIN rail in your electrical distribution box.

35mm DIN Rail Mounting diagram
The module can be easily mounted on a standard 35mm DIN rail.

Follow the wiring diagram below to connect the energy monitor and current transformer (CT) clamps:

Detailed wiring diagram for energy monitor
Wiring diagram for the energy monitor and CT clamps.

Note: When installing, please ensure that the circuit measured by the CT clamp is in the same phase as the circuit powered by the module.

The monitor can be used to measure energy consumption and generation, for example, with solar panel systems:

Application diagram for energy monitor with solar panels
Example application: monitoring energy from the grid and solar panels.
Installed smart switch in electrical panel
Example installation of the energy monitor within an electrical panel.

4.4 Adding the ZigBee Meter to the App

This device requires a ZigBee gateway (hub) to connect to the Tuya Smart or Smart Life app.

  1. Ensure your ZigBee gateway is already set up and connected to the app.
  2. Power on the energy monitor.
  3. Press the reset button on the energy monitor for about 5 seconds until the LED indicator blinks quickly.
  4. In the Smart Life/Tuya Smart app, navigate to your ZigBee gateway and select "Add subdevice" or similar option.
  5. Confirm that the device LED is blinking quickly in the app. The app will then discover and add the device.
  6. Once successfully added, click 'DONE'.
Video demonstrating the Zigbee pairing process and real-time energy monitoring in the app.

5. Operation

5.1 Monitoring Electricity Usage

After successful pairing, you can monitor real-time electricity usage and historical data through the app.

  • The app displays Total Energy (Forward and Reverse), Voltage, Frequency, and Total Power.
  • You can switch between Channel A, Channel B, or view Total usage.
  • Historical data can be viewed by Day, Month, or Year.
App interface showing Zigbee Dual Channel Smart Meter readings
App interface displaying real-time energy data for Channel A and Channel B.
App interface showing electricity statistics
View daily, monthly, and yearly electricity statistics.
App screenshot showing sensor data
Detailed sensor data including current, energy, frequency, power factor, and voltage.
App screenshot showing individual device total usage and energy flow
Visual representation of individual device usage and energy flow.

5.2 Correct Clamp Direction

The direction of the current transformer (CT) clamp is crucial for accurate readings, especially for bidirectional monitoring (consumption vs. generation).

  • If your solar system is generating power, adjust the clamp's direction until the app shows 'Reverse' for generation.
  • If your solar system is not generating (or for general consumption monitoring), adjust the clamp's direction until the app shows 'Forward' for consumption.
  • Perform this adjustment for each channel.
App display for Forward and Reverse energy flow
App display showing 'Forward' for consumption and 'Reverse' for generation, based on clamp direction.

6. Maintenance

The energy monitor requires minimal maintenance. Keep the device clean and free from dust. Do not use harsh chemicals or abrasive cleaners. Ensure the device is not exposed to moisture or extreme temperatures.

7. Troubleshooting

7.1 App shows 'Current and Power as '0''

This indicates that the CT clamp is not sensing current. Ensure the following:

  • A device's wire (either live or neutral, but not both) is correctly placed within the CT clamp.
  • The device connected to that circuit is turned ON and actively drawing power.
Troubleshooting: App shows zero current/power
Ensure a single wire is correctly clamped for current detection.

7.2 App seems stuck after changing report rate

If the app becomes unresponsive after changing the reporting rate to less than 10 seconds, it's likely due to slow network performance.

  • Sign out of the app.
  • Re-enter the app and change the reporting rate back to 10 seconds. This should resolve the issue.
App settings for report rate control
Adjusting the report rate in app settings.

7.3 How to clear App electricity data

To clear the accumulated electricity data in the app:

  1. Press the reset button on the energy monitor 5 times quickly. The indicator LED will blink quickly. If it doesn't, repeat the action until it blinks quickly.
  2. Wait for 10 seconds.
  3. In the app, navigate to the device's settings page and click 'Disconnect and wipe data'.
Instructions for clearing app data
Steps to clear electricity data from the app.

7.4 General Connectivity Issues

  • Ensure your ZigBee gateway is powered on and within range of the energy monitor.
  • Check the ZigBee network status in your app.
  • If the device is not recognized, try resetting the device by holding the reset button for 5 seconds until the LED blinks, then attempt pairing again.

8. User Tips

  • Home Assistant Integration: For advanced users, this device can be integrated with Home Assistant. You may need to install custom quirks (e.g., `TS0601_TZE284_81yrt3lo` for ZHA or modify the Zigbee2MQTT database) to ensure all entities and precise data are displayed correctly.
  • Clamp Direction: Always double-check the direction of the CT clamps. If readings appear inverted (e.g., consumption showing as generation), reverse the clamp direction or adjust in software if supported.
  • Low Current Accuracy: The device's accuracy is specified from 1A onwards. Readings below this threshold may not be precise.
  • ZigBee Router Node: As a continuously powered ZigBee device, the energy monitor can act as a router node, extending the range and stability of your ZigBee mesh network.
  • Data Transmission Frequency: The data transmission frequency can be configured (e.g., from 3 to 60 seconds). A default of 10 seconds is usually stable, but you can experiment with lower values if your network is robust.

9. Warranty & Support

For detailed warranty information and further support, please refer to the official user manual PDF available from the seller. You can typically find this document on the product page or by contacting MatSee Plus customer support.

A user manual in PDF format is available for download: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.