1. Product Overview
The NINIVISION Solar Security WiFi Camera is a versatile surveillance solution designed for both indoor and outdoor use. Featuring 4MP resolution, 10X optical zoom, PTZ (Pan-Tilt-Zoom) control, two-way audio, and PIR motion detection, this camera offers comprehensive monitoring capabilities. It is powered by a built-in battery and supported by a solar charging panel for continuous operation.
Figure 1: NINIVISION Solar Security WiFi Camera highlighting features like 8MP WiFi PTZ Solar, Color Night Vision, Two-Way Audio, Auto Tracking, IP66 Waterproof, O-KAM APP, PTZ Control, and 10X Zoom.
Product Video Overview
Video 1: A brief demonstration of the camera's features, including physical overview, solar charging, 10X PTZ zoom, two-way audio, auto tracking, IP66 waterproofing, color night vision, and multi-user remote access.
2. Package Contents
Please check that all items are included in your package:
- Security Camera (T Series or M Series, Single or Dual Lens variant)
- Solar Panel
- USB Cable
- Tweezers
- Screws and Anchors (x7)
- Threaded Bracket Drilling Template
- Support Plate
- Quick Guide (User Manual)
Figure 2: The camera shown with its solar charging panel and various accessories.
3. Setup Guide
3.1 Camera Appearance and Structure
The camera is available in T Series and M Series, with options for single or dual lenses. Familiarize yourself with the camera's components:
Figure 3: Visual representation of T Series and M Series cameras, showing both single and dual lens variants.
Key components include the Reset button, SD card slot, Charge port (USB), and the OFF-ON toggle switch. The exact location may vary slightly between T and M series models.
Figure 4: Detailed diagram of the camera's structure, indicating the Reset button, SD card slot, Charge port, and OFF-ON switch for both M Series and T Series.
3.2 Micro SD Card Installation
- Ensure the camera's toggle switch is in the "OFF" state before proceeding.
- Open the silicone cover at the bottom of the bracket.
- Open the black rubber plug on the camera body.
- Using the provided tweezers, hold the Micro SD card and insert it into the SD card slot. Push until it clicks into place.
- Push the silicone cover back to seal the slot.
Important: The camera supports Micro SD cards up to 256GB. Ensure the camera is turned off before inserting or removing the SD card.
3.3 Antenna Placement
For optimal signal reception, ensure the antennas are placed correctly. Avoid placing them in a way that obstructs the signal path.
Figure 5: Illustration of correct antenna placement (V-shape) versus incorrect placement (folded inwards).
3.4 Battery Charging
The camera's internal battery may not be fully charged upon arrival due to shipping regulations. Use the provided USB cable (with a 5V adapter, not included) to charge the camera. The LED indicator will be red during charging and turn off when fully charged. A full charge typically takes about 4 hours.
LED Indicator Information
| LED Indicator | Description |
|---|---|
| Blue light flashes slowly | Waiting for distribution network / Network configuration failed |
| Blue light is always on | Configuration complete |
| Blue light flashes quickly | Disconnected from the network |
| Green light flashes slowly | Restoring factory settings / Device unbinding |
| Green light is always on | AP mode |
| Steady red light | Charging |
| Red light goes out | Fully charged |
3.5 Download the O-KAM Pro App
To manage your camera, download the O-KAM Pro app. You can scan the QR code below or search for "O-KAM Pro" in the App Store (iOS) or Google Play Store (Android).
Figure 6: QR code for downloading the O-KAM Pro app, along with Google Play and App Store logos.
3.6 Add a Camera to the App
- Log into the O-KAM Pro app.
- Follow the on-screen prompts to connect the camera to your Wi-Fi network.
- Place the camera near your Wi-Fi router during the initial configuration.
- In the app's QR code scanning interface, scan the QR code displayed on the camera, or select the "WiFi camera" option to proceed with setup.
Wi-Fi Setup Notes:
- The camera only supports 2.4 GHz Wi-Fi networks, not 5 GHz Wi-Fi.
- Avoid using special characters or symbols (e.g., ~!#$%^&*...) in your Wi-Fi password.
- Perform the configuration near your Wi-Fi router for a stable connection.
3.7 Physical Installation (Camera)
Before drilling, ensure the camera has been successfully added to your O-KAM Pro App and can stream video. Find a suitable installation spot where the camera's sight is not blocked and the PIR motion sensor can effectively cover the desired area (approx. 12 meters / 39 feet).
- Use the provided drilling template to mark 4 holes on the wall.
- Drill 4 holes using a 15/64" (6mm) drill bit.
- Insert the anchors into the drilled holes.
- Align the support plate with the anchors and fix it to the wall using the matched screws.
- Align the raised positions on both sides of the camera support with the slots on the support plate. Push the camera upward until it is securely connected to the support plate.
3.8 Solar Panel Installation
The solar panel provides continuous charging for your camera. Choose an installation location that receives full, direct sunlight year-round for several hours a day. The energy output is affected by weather, seasonal changes, and geographic location.
- If the mounting surface is soft or unstable, drill a hole, insert an anchor, and then secure the bracket with screws.
- Screw the gimbal into the back of the solar panel and tighten it with the included nut.
- Screw the locking screw into the gimbal, ensuring the universal joint is angled upward.
- Mount the solar panel bracket to your chosen location.
- Adjust the solar panel's angle for optimal sun exposure. Loosen the locking screw, adjust the panel (left/right, up/down up to 90°), and then tighten the locking screw to secure its position. A tilt of 30-35° is often recommended.
- After installation, ensure all locking mechanisms are tightly secured.
4. Operating Instructions
4.1 PTZ Control
Use the O-KAM Pro app to control the camera's pan, tilt, and zoom functions:
- Slide Control: Swipe up, down, left, or right on the app's live view to move the camera's lens.
- Rotation Control: Use the dedicated rotation controls in the app for precise pan (355°) and tilt (90°) adjustments.
- Live Screen Zoom: Pinch to zoom in or out on the live feed, supporting up to 10X optical zoom.
Figure 7: App interface demonstrating slide control for camera movement and PTZ rotation controls.
4.2 Camera Features (via App)
The O-KAM Pro app provides access to various camera features:
- Night Vision: Toggle between Color Night Vision and IR Night Vision modes. The smart IR-Cut filter automatically switches between day and night to reduce color cast and enhance brightness.
- Motion Detection & Human Tracking: The camera can detect motion and automatically track people within its alarm area.
- Two-Way Audio: Communicate in real-time through the camera's built-in microphone and speaker.
- Remote Shutdown: Power off the camera remotely.
- Screenshot & Record: Capture images or record video directly from the live feed.
- Pre-position & PTZ Calibration: Set and recall specific camera positions.
Figure 8: Illustration of Smart IR-Cut filter functionality, showing Day Vision, Night Vision, and Full Color Night Vision modes.
4.3 Device Sharing
You can share access to your camera with family and friends:
- Open the O-KAM Pro app and select your camera from the home page.
- Go to Camera Settings and click "Share".
- A QR code will be generated. Your friends can scan this QR code with their O-KAM Pro app to gain access.
Note: If you disable sharing permissions, the shared user will only be able to view the video but cannot control camera functions.
5. Maintenance
- Solar Panel Cleaning: Regularly wipe the surface of the solar panel with a soft, damp cloth to remove dust and debris, ensuring optimal charging efficiency.
- Firmware Updates: Ensure your camera's firmware is always updated to the latest version for improved performance, security, and new features. Check the app for update notifications.
6. Troubleshooting (Common Problems)
6.1 Cannot add camera for the first time?
- Ensure the camera is powered on and the working status light is blinking blue slowly, or you hear "Please use the App to configure WiFi" from the camera.
- Verify your Wi-Fi account and password are correct.
- Confirm your Wi-Fi is 2.4GHz; the camera does not support 5GHz.
- Ensure your network is stable and operate close to the router during setup.
- If QR code configuration fails, try AP network configuration (connect your phone to the camera's Wi-Fi hotspot, then return to the app).
- Avoid complex Wi-Fi passwords with special characters like '\'.
- If issues persist, restart your router and try again.
- Provide the nameplate label of the router if seeking further support.
6.2 How far should the camera be from the router?
In an open area, the Wi-Fi connection can typically reach up to 150 meters. However, thick walls, electromagnetic devices, and large metal objects can significantly interfere with the Wi-Fi signal. For weak or unstable signals, place the camera as close to the router as possible, or consider using a Wi-Fi extender.
6.3 SD card cannot be recognized?
- After inserting the SD card, check the "System Settings" -> "SD Card Recording Settings" in the app to see if the capacity is displayed. If it shows "No SD card detected," the recognition failed.
- Use a reputable brand SD card.
- Ensure the SD card can be recognized by a computer.
- The camera supports FAT32 format only.
- Recommended SD card capacity is between 2GB and 256GB.
- Use a high-speed SD card (Class 4 or above).
- Try inserting and unplugging the SD card several times.
- Try a different SD card.
- After inserting the card, wait about 30 seconds for the camera to recognize it.
6.4 What should I do if the equipment fails?
- Long press the power button to restart the camera.
- If there is no response, open the USB silicone cover at the bottom of the camera, long press the reset button to reset, and then long press the power button to restart the camera.
7. Specifications
| Feature | Specification |
|---|---|
| Model Number | Overs-CWXC-A9 |
| High Definition | 8.0 Megapixels (8MP) |
| Zoom | 10X Optical Zoom |
| Lens (mm) | 2.7-12mm |
| Lens Quantity | Dual Lens |
| Connectivity | IP/Network Wireless (2.4GHz Wifi) |
| Power Mode | Battery Powered (Built-in rechargeable battery) |
| Solar Panel Power | 5W |
| Power Supply (V) | DC 5V |
| Power Consumption (W) | <3W |
| TF Card Support | Max Support 128G Card (FAT32 format) |
| Cloud Storage | Support (Free for one month) |
| Audio Output | Two Way Audio |
| Night Mode | IR Infrared Night Vision, Color Night Vision |
| IR Distance (m) | 40M |
| Minimum Illumination (Lux) | 0.001lux |
| Viewing Angle | 360° |
| Movement Range (Pan) | Other (355° via app) |
| Movement Range (Tilt) | Other (90° via app) |
| Video Compression Format | H.265 |
| AI Functions | Motion Detection, AI Human Detection, Humanoid detection |
| Alarm Action | FTP Photo, Email Photo, Local Alarm, APP Push |
| Smart Playback | Select time to play |
| IP Rating | IP66 (Waterproof / Weatherproof) |
| Scene | Indoor and outdoor |
| Shell Material | Plastic |
| Supported Mobile Systems | Android, iOS |
| Supported Operating Systems | Windows 98, XP, 7, 8, 10 |
| Operating Temperature | -20.5°C to 48.5°C (-5°F to 120°F) |
| Cable Length | 3m |
| Package Dimensions | 21cm (L) x 18cm (W) x 16cm (H) |
| Package Weight | 1.008 kg |
| Certifications | CE, FCC, RoHS |
8. Warranty and Support
This product comes with a 3-year warranty.
For detailed instructions and further assistance, you may refer to the official user manual PDF. A comprehensive user manual (PDF) is available for download. Please refer to the product page or manufacturer's website for the direct link.
FCC Warning: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation must meet two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
9. User Tips
- Optimal Solar Charging: Position the solar panel to receive maximum direct sunlight throughout the day, especially during winter months when sunlight is weaker.
- Regular Cleaning: Keep the solar panel clean from dust, snow, or leaves to ensure efficient power generation.
- Wi-Fi Signal Strength: For outdoor installations, test the Wi-Fi signal strength at the desired camera location before final mounting. A strong 2.4GHz signal is crucial for reliable performance. Consider a Wi-Fi extender if the signal is weak.
- Password Security: Use a strong, unique password for your Wi-Fi network and camera app to protect your privacy and security.
- PIR Motion Detection: When installing, consider the PIR sensor's range (approx. 12 meters / 39 feet) and angle to effectively cover the areas you want to monitor. Avoid placing it where constant, non-threatening motion (e.g., tree branches) might trigger false alarms.
- Firmware Updates: Regularly check for and install firmware updates via the O-KAM Pro app to benefit from the latest features, security patches, and performance improvements.