1. Introduction
Thank you for purchasing the T&G TG506 Portable Wireless Bluetooth Speaker. This speaker is designed to provide high-quality audio with versatile connectivity options, including Bluetooth, FM radio, TF card, USB, and AUX input. Its compact and waterproof design makes it ideal for both indoor and outdoor use. Please read this manual carefully before using the product to ensure proper operation and to maximize its lifespan.
2. Safety Information
- Do not expose the speaker to extreme temperatures or direct sunlight for extended periods.
- Avoid dropping or subjecting the speaker to strong impacts.
- Keep the speaker away from water and moisture, despite its waterproof rating, to prevent damage to internal components.
- Do not attempt to disassemble or repair the speaker yourself. Contact qualified service personnel for assistance.
- Use only the specified charging voltage (DC 5V/500mA) to prevent damage to the battery and speaker.
3. Package Contents
Please check that all items are present:
- T&G TG506 Portable Wireless Bluetooth Speaker
- USB Type-C Charging Cable
- User Manual (this document)
4. Product Overview
Familiarize yourself with the speaker's ports and controls:
Interface Diagram:
Control Buttons:
- USB Input Interface: For playing MP3/WAV audio from a USB drive.
- TF Card Input Interface: For playing MP3/WAV audio from a TF card.
- Power Switch: ON/OFF.
- DC 5V Charging Interface: Standard USB Type-C port for charging.
- Mode Button (M): Short press to switch between modes (USB, TF card, FM, Bluetooth).
- Volume Down / Previous Track (-): Short press for previous track (music mode) or previous FM station (FM mode). Long press to decrease volume.
- Volume Up / Next Track (+): Short press for next track (music mode) or next FM station (FM mode). Long press to increase volume.
- Play/Pause / Answer Call (>): Short press to play/pause music. In Bluetooth mode, short press to answer/hang up calls. In FM mode, short press to auto-search/pause FM stations.
5. Specifications
| Feature | Specification |
|---|---|
| Bluetooth Version | 5.3 |
| Bluetooth Protocols | L2CAP/A2DP (AVCTP/AVDTP/AVRCP), HSP/HFP |
| Wireless Working Distance | Up to 10 meters |
| Signal-to-Noise Ratio (SNR) | ≥85dB |
| Battery Capacity | 3.7V 500mAh |
| Normal Playing Time | Approx. 2 hours |
| Speaker Unit | Ø 52 mm plus* 1 |
| Speaker Power | 3W *1 |
| Frequency Response | 120Hz-20KHz |
| Unit Dimensions (LWH) | 123 x 46 x 81 mm |
| Unit Weight | Approx. 258g |
| Charging Input | DC 5V/500mA (Type-C USB) |
| Waterproof Rating | Yes |
| Built-in Microphone | Yes |
| Audio Crossover | Full-Range |
| PMPO | 5 W |
| Channels | 1 |
| Support Memory Card | Yes |
6. Setup
6.1. Charging the Speaker
- Locate the DC 5V charging interface (Type-C USB port) on the speaker.
- Connect the provided USB Type-C charging cable to the speaker and a compatible USB power source (e.g., wall adapter, computer USB port).
- The charging indicator light will illuminate. Once fully charged, the light may change color or turn off (refer to specific indicator behavior if available).
6.2. Powering On/Off
- To power on, slide the power switch to the "ON" position.
- To power off, slide the power switch to the "OFF" position.
7. Operating Instructions
7.1. Bluetooth Mode
- Power on the speaker. It will automatically enter Bluetooth pairing mode (a voice prompt or indicator light may confirm this).
- Enable Bluetooth on your device (smartphone, tablet, laptop, etc.).
- Search for "TG506" in the list of available Bluetooth devices and select it to pair.
- Once paired, you will hear a confirmation sound, and the indicator light will stop flashing. You can now play audio from your device through the speaker.
7.2. TF Card / USB Playback Mode
- Insert a TF card or USB drive (containing MP3/WAV audio files) into the corresponding slot on the speaker.
- The speaker will automatically detect the storage device and switch to TF card or USB playback mode. If not, short press the 'M' (Mode) button to cycle through modes until you reach the desired playback mode.
- Use the '+', '-', and '>' buttons to control playback (next/previous track, play/pause).
7.3. FM Radio Mode
- Power on the speaker and short press the 'M' (Mode) button until you hear the FM radio prompt.
- To auto-search and save stations, short press the '>' (Play/Pause) button. The speaker will scan and store available FM stations.
- Use the '+' and '-' buttons to navigate between saved FM stations.
- For better FM reception, connect the charging cable to the DC 5V port; it acts as an antenna.
7.4. AUX Input Mode
- Connect one end of a 3.5mm audio cable (not included) to the AUX port on the speaker and the other end to the audio output of your device.
- The speaker will automatically switch to AUX mode. If not, short press the 'M' (Mode) button to select AUX mode.
- Control playback from your connected device.
7.5. Hands-Free Calling
- When a call comes in during Bluetooth mode, short press the '>' (Play/Pause) button to answer the call.
- Short press the '>' button again to end the call.
7.6. TWS Function (True Wireless Stereo)
To pair two TG506 speakers for True Wireless Stereo sound:
- Ensure both speakers are powered off and not connected to any Bluetooth device.
- Power on both speakers.
- On one of the speakers (this will be the primary speaker), long press the 'M' (Mode) button for 4 seconds until you hear a