1. Introduction
The Tuya 15-in-1 Smart WiFi Air Quality Monitor is a versatile device designed to provide real-time monitoring of various indoor air quality parameters. With its 2.8-inch TFT display and integration with the Tuya Smart / Smart Life APP, it offers comprehensive data viewing and remote control capabilities. This manual provides essential information for the safe and effective use of your air quality monitor.
The device detects the following parameters:
- Carbon Dioxide (CO2)
- Carbon Monoxide (CO)
- Formaldehyde (HCHO)
- Total Volatile Organic Compounds (TVOC)
- Particulate Matter (PM0.3, PM1.0, PM2.5, PM10)
- Temperature
- Humidity
- Air Quality Index (AQI)
- Date & Time
- Alarm Clock
- Timer
Video: Overview of the Tuya Smart Air Quality Monitor's features and app integration.
2. Important Safety Information
Please read all safety warnings and instructions carefully before use.
- This product has a built-in lithium battery. Use only a standard DC-5V charger.
- Ensure the air inlet and outlet are not blocked during operation to prevent numerical deviations.
- Avoid using the device frequently in dusty environments with poor air quality to prolong its service life.
- Do not use this device in high temperatures, high humidity, dirty places, or near strong magnetic fields to avoid inaccurate readings or internal circuit failure.
- The device operates within a temperature range of -10°C to 50°C. Store the device and accessories between -20°C and 55°C. Extreme temperatures may cause equipment failure.
- Avoid exposure to rain or moisture to prevent malfunctions or damage to the display screen, battery, case, and circuit.
- Do not insert sharp objects (e.g., pins) into the air inlet, outlet, or charging port to avoid damaging the device.
- Upon initial unboxing, if an alcohol odor is present, place the device near a window with good air ventilation for 1-2 hours. This will allow the data to return to normal values.
- TVOC sensors may be affected by smoke, alcohol, formaldehyde, perfume, and other odors. Allow time for readings to normalize after exposure.
- For zero operation (clearing data), place the device near a window with good air ventilation, restart it (counting display for 10-18 seconds), shut down, and restart again. This will clear the data to zero.
- This product provides detection and alarm functions but cannot prevent dangerous substance leakage. The manufacturer is not responsible for accidents caused by such losses.
3. Package Contents
Please check the box for the following items:
- Tuya 15-in-1 Smart WiFi Air Quality Monitor (MT15/MT29)
- Bilingual User Manual
- Type-C Data Cable
4. Product Overview
The air quality monitor features a compact design with a 2.8-inch TFT display. It integrates multiple sensors (infrared, laser, semiconductor) for simultaneous detection of various air parameters. The device supports WiFi connectivity for remote monitoring and smart scene integration via the Tuya Smart / Smart Life APP.
Figure 1: Front view of the Air Quality Monitor displaying time and stopwatch.
Figure 2: Front view of the Air Quality Monitor displaying AQI, CO2, HCHO, TVOC, PM values, temperature, and humidity (Normal state).
Figure 3: Front view of the Air Quality Monitor displaying 'Calibrating'.
Figure 4: Back view of the Air Quality Monitor with ventilation and product details.
5. Setup
5.1 Initial Power-On and Calibration
- Press and hold the "Power button" for more than 3 seconds to power on the device.
- After power-on, the device will count down for 60 seconds. After the countdown, it will begin to detect and display current air quality parameters (e.g., 11 parameters as shown in Figure 2).
- For the most accurate data, allow the device to operate continuously for 24 hours after initial power-on or after inserting the USB charging cable. The general boot-up process takes 30 minutes to display accurate data.
5.2 Charging the Device
The device uses a 2000mAh lithium polymer battery. A full charge typically takes 3-4 hours and provides 6-7 hours of operation. Use the provided Type-C USB cable and a DC5V/1A USB power adapter for charging.
5.3 App Installation (Tuya Smart / Smart Life)
- Search for "Tuya Smart" or "Smart Life" in your mobile phone's app store (e.g., Application Market).
- Download and install the app.
- Register an account after installation.
5.4 WiFi Pairing
- Ensure the device is powered on. Within 2 minutes of power-on, or by pressing the power button 5 times continuously, the WiFi symbol on the device's display will flash quickly, indicating it's in pairing mode.
- Open the Tuya Smart / Smart Life APP and click "Add device".
- The app will search for WiFi devices. Once found, click "Add" again.
- Enter your WiFi network name and password in the app, then click "Next".
- Follow the on-screen prompts to complete the pairing connection. Once successful, the WiFi symbol on the device will stop flashing.
6. Operation
6.1 Key Operations
The device is controlled primarily using the "Power button":
- Short press (1 time):
- In the main display mode (Figure 2), switch the temperature unit between Celsius (°C) and Fahrenheit (°F).
- In the alarm/timer display mode (Figure 1), turn on/off the timer or timer function.
- Short press (2 times):
- In the main display mode (Figure 2), turn the buzzer on/off.
- In the alarm/timer display mode (Figure 1), clear the timer or timer settings. If an alarm/timer is sounding, pressing twice will turn off the alarm sound.
- Short press (3 times): Enter/exit the alarm clock & timer display interface (Figure 1).
- Short press (4 times): The instrument enters 120-second parameter calibration mode.
- Short press (5 times): Make the device enter WiFi pairing state / reset WiFi to enter pairing state (the device WiFi icon blinks with a delay of about 5 seconds).
6.2 Display Modes
The device has multiple display modes accessible via key operations:
- Main Display Mode (Figure 2): Shows Date & Time, AQI, CO2, CO, HCHO, TVOC, PM0.3, PM1.0, PM2.5, PM10, Temperature, and Humidity.
- Alarm Clock & Timer Mode (Figure 1): Shows Date & Time, Alarm Clock settings, and Timer/Stopwatch.
6.3 Date & Time Display
When the device is successfully connected to the Tuya Smart APP via WiFi, the time and calendar parameters will be synchronized with the mobile APP automatically. The date and time are shown in both main display and alarm/timer interfaces, using a 24-hour system.
6.4 Alarm Settings
The alarm clock interface is accessed by pressing the power button 3 times. You can set up to three alarms. For example, to set Alarm Clock 1 to 10:00 and Alarm Clock 2 to 10:30, navigate to the alarm settings in the app or device, select the desired time, and confirm. The device will alarm for 30 seconds when the set time is reached, and the alarm clock symbol will flash. Press the power button twice to cancel the alarm sound.
You can also set alarm values for specific parameters (CO2, CO, PM2.5, HCHO) via the Tuya Smart APP. The default thresholds are:
- CO2: > 1500ppm
- CO: > 200ppm
- PM2.5: > 100ug/m³
- HCHO: > 0.08mg/m³
Exceeding these thresholds will trigger 3 rapid buzzer alarms with one-second intervals. The display color will also change (Green: Normal, Orange: Warning, Red: Alarm) as shown in Figure 2 (Normal), Figure 5 (Warning), and Figure 6 (Alarm) on OCR page 1.
6.5 Timer Function
To access the timer display, short press the power button 3 times. In this mode, a single press of the power button starts the positive timing (up to 9 hours, 59 minutes, 59 seconds). Pressing it once more pauses the timing, and another press resumes it. Pressing the button twice cancels the timing and resets it.
To set the timer, long press the power button for 1 second. The 'H' (hour) digit will flash. Use short presses of the power button (1-9 times) to select the number of hours. Long press again, and the 'Min' (minute) digit will flash, allowing you to set minutes and seconds similarly. If no action is taken for 6 seconds during setting, the setting is complete. Alternatively, timer settings can be managed via the Tuya Smart APP.
6.6 Remote Monitoring and Historical Data (Tuya Smart APP)
Once successfully linked to WiFi, the Tuya Smart APP allows remote real-time monitoring of all 11 air parameters. You can view current data, historical data (day, month, year), and manipulate device functions. The APP also provides AQI data color warnings (0-100: green/excellent; 100-250: orange/moderate pollution; >250: red/heavy pollution).
To view historical data curves for 10 air parameters, click "Statistical curve" in the APP. You can then select specific parameters (CO2, HCHO, TVOC, CO, PM2.5, PM10, PM1.0, PM0.3, TEMP, HUMI) and view their daily, monthly, or yearly curves. Note that these curves are calculated by average parameters and may have minor discrepancies with actual instantaneous data.
6.7 Setting Device Sleep Time
You can set the device's hibernation time through the Tuya Smart APP settings.
7. Maintenance
7.1 Cleaning
To maintain optimal performance, keep the device clean and free from dust. Avoid using harsh chemicals or abrasive materials. If an alcohol odor is detected upon unboxing, ventilate the device for 1-2 hours.
7.2 Handling Abnormal Data
If the data displayed is abnormally high, turn off the machine and then turn it on again. Plug in the USB cable and place the device near a window in a well-ventilated environment. Allow it to operate for 24 hours. This process will clear the internal data to zero, and readings should return to normal.
8. Troubleshooting
8.1 Inaccurate Readings
- Ensure the air inlet and outlet are not blocked.
- Avoid using the device in dusty, high-temperature, high-humidity, or dirty environments.
- Keep the device away from strong magnetic fields.
- If TVOC sensors are affected by smoke, alcohol, formaldehyde, perfume, or other odors, allow time for the readings to return to normal.
- Perform a zero operation as described in section 7.2 if data remains abnormal.
8.2 Equipment Failure
- Ensure the ambient temperature is within the operating range (-10°C to 50°C).
- Avoid exposure to rain or moisture.
- Ensure the device is charged correctly using the specified DC-5V charger.
8.3 WiFi Connection Issues
- Ensure the device is in pairing mode (WiFi symbol flashing). If not, press the power button 5 times continuously.
- Verify your WiFi network name and password are correct in the Tuya Smart / Smart Life APP.
- Ensure the device is within range of your WiFi router.
9. Product Specifications
| Parameter | Value |
|---|---|
| CO2 Detection Range | 400-5000PPM, ±50 ±5%PPM |
| CO2 Detection Sensitivity | 1PPM |
| CO Detection Range | 0-999PPM, ±10PPM |
| CO Detection Sensitivity | 1PPM |
| TVOC Detection Range | 0-9.99mg/m³, ±0.05mg/m³ |
| HCHO Detection Range | 0-1.99mg/m³, ±0.05mg/m³ |
| PM2.5 Detection Range | 0-999ug/m³, ±10ug/m³ |
| PM2.5 Detection Sensitivity | 1ug/m³ |
| PM1.0 Detection Range | 0-999ug/m³, ±10ug/m³ |
| PM10 Detection Range | 0-999ug/m³, ±10ug/m³ |
| PM0.3 Detection Range | 0-999ug/m³, ±10ug/m³ |
| Temp Measurement Range | -10 ~ 50°C |
| Temp Measurement Accuracy | ±2°C |
| Humidity Measurement Range | 0% ~ 99% RH |
| Humidity Measurement Accuracy | ±5%RH |
| Charging Mode | DC5V/1A TYPE-C USB interface |
| Battery | Lithium polymer battery 2000mAh |
| Working Current | 260mA |
| Working Voltage | 3.7V |
| Dead Weight | About 160g |
10. Environmental Pollution Index Reference
The following table provides a reference for environmental pollution levels based on detected parameters. Note that initial alarm values are defaults and can be customized via the APP.
| Parameter | Green (Normal) | Orange (Warning) | Red (Alarm) |
|---|---|---|---|
| AQI | 0-100 | 100-250 | > 250 |
| CO2 | 0-900 | 900 - APP set alarm (default: 1500) | > APP set alarm |
| HCHO | 0-0.06 | 0.06 - APP set alarm (default: 0.08) | > APP set alarm |
| TVOC | 0-0.8 | 0.8-1.6 | >1.6 |
| CO | 0-100 | 100 - APP set alarm (default: 200) | > APP set alarm |
| PM2.5 | 0-60 | 60 - APP set alarm (default: 100) | > APP set alarm |
| PM10 | 0-100 | 100-200 | >200 |
| PM1.0 | 0-100 | 100-200 | > 200 |
| PM0.3 | 0-100 | 100-200 | > 200 |
11. User Tips
- For initial setup, ensure the device is fully charged and allowed to stabilize for 24 hours in a well-ventilated area for the most accurate baseline readings.
- Regularly check the app for historical data trends to identify patterns in your indoor air quality.
- Customize alarm thresholds in the Tuya Smart / Smart Life app to suit your specific needs and sensitivities.
- Keep the device away from direct drafts, open windows, or strong odors (like cooking fumes or cleaning products) during measurement to avoid skewed readings.
12. Warranty and Support
This product comes with a 1-year warranty period from the date of purchase.
For detailed guides, additional information, or technical support, please refer to the official user manual PDF available at: User manual (PDF).
If you encounter any issues not covered in this manual, please contact your retailer or the manufacturer's customer support for assistance.