Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your new Instant Water Heater. This device is designed to provide rapid and consistent hot water for showering, featuring an LCD digital display for precise thermostatic control and a durable stainless steel heating core.

Product Overview
The Instant Water Heater is a compact and efficient unit designed for on-demand hot water. Its main body is constructed from durable ABS material, ensuring longevity and safety. Key components include an outlet switch, a clear screen display for temperature, an adjusting handle for water flow and temperature, and a flexible shower hose connected to a shower nozzle.


The unit incorporates advanced features such as hydroelectricity separation for enhanced safety, an anti-electric wall, and IPX4 waterproof rating, making it suitable for bathroom environments. It also features convenient mounting holes for easy installation.


Specifications
| Feature | Detail |
|---|---|
| Brand Name | KKMOON |
| Material | Stainless Steel (heating core), ABS (body) |
| Origin | Mainland China |
| Hign-concerned Chemical | None |
| Main Unit Dimensions (Height x Width x Depth) | 330mm x 125mm x 65mm (approx.) |
| Bathing Hose Length | 1.4m |
| Shower Nozzle Length | 220mm |
| Waterproof Rating | IPX4 |

Setup and Installation
Installation should be performed by a qualified professional to ensure safety and proper functioning. Ensure the power supply is disconnected before beginning installation.
- Mounting: Choose a suitable location in your shower area. The unit is compact and designed to save space. Use the integrated mounting holes on the back of the unit to securely fasten it to the wall.
- Water Connection: Connect the water inlet to your cold water supply. Ensure all connections are tight to prevent leaks.
- Shower Hose and Nozzle: Attach the 1.4m bathing hose to the outlet switch on the top of the main unit. Then, connect the shower nozzle to the other end of the hose.
- Electrical Connection: Connect the unit to a suitable electrical supply. This device requires a dedicated circuit and proper grounding. Consult local electrical codes and a professional electrician for this step.
- Test: Once all connections are secure, turn on the water supply and check for any leaks. Then, restore power and test the unit's functionality.

Operating Instructions
- Power On: Ensure the unit is properly installed and connected to both water and electricity.
- Activate Water Flow: Turn on the water supply to the unit. Water should flow through the shower nozzle.
- Adjust Temperature: Use the adjusting handle (water flow regulating valve) located at the bottom of the unit to set your desired water temperature. Rotate towards 'High' for hotter water and 'Low' for cooler water. The LCD digital display will show the current water temperature.
- Rapid Heating: The tankless design allows for rapid heating, providing hot water in approximately three seconds.
- Power Off: After use, turn off the water supply and ensure the unit is powered down.



Maintenance
Regular maintenance ensures the longevity and efficient operation of your water heater.
- Cleaning: Periodically wipe the exterior of the unit with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Shower Head Cleaning: Clean the shower nozzle regularly to prevent mineral buildup and ensure optimal water flow.
- Inspection: Periodically check all water and electrical connections for any signs of wear, damage, or leaks.
- Descaling: In areas with hard water, mineral deposits may accumulate over time. Consult a professional for descaling procedures if you notice reduced water flow or heating efficiency.
Troubleshooting
If you encounter issues with your water heater, refer to the following common troubleshooting steps:
- No Hot Water:
- Check if the power supply is connected and the circuit breaker has not tripped.
- Ensure water flow is sufficient. The unit requires adequate water pressure to activate heating.
- Verify the temperature adjusting handle is set to a 'High' position.
- Water Not Hot Enough:
- Increase the water flow regulating valve towards 'High'.
- Check the incoming water temperature, as very cold inlet water may affect output temperature.
- Water Leaks:
- Immediately turn off water and power supply.
- Inspect all connections for tightness. If leaks persist, contact a qualified plumber.
- Error Code on Display:
- Refer to the specific error code in a more detailed product manual (if available) or contact customer support.
For issues not covered here, please contact customer support.
Warranty and Support
This product comes with a standard manufacturer's warranty. Please retain your proof of purchase for warranty claims.
- Free Returns: Enjoy free returns within 90 days of purchase.
- Security & Privacy: Your personal details are protected, and payments are secure.
- Customer Service: For technical support, warranty inquiries, or service requests, please contact the seller or refer to the contact information provided with your purchase.