Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your WESA Mirror Acrylic Wall Rocker Switch. Please read this manual carefully before installation and use to ensure safe and efficient operation.
Safety Information
WARNING: Electrical installation should only be performed by a qualified electrician. Always turn off power at the circuit breaker before beginning any electrical work.
- Ensure the power supply is disconnected before installation or maintenance.
- Do not exceed the specified voltage and current ratings.
- Keep the switch away from water and moisture.
- Do not attempt to repair or modify the switch yourself. Contact qualified personnel for service.
- This product is designed for indoor use only.
Product Features
- Material: Mirror Acrylic Panel, flame retardant ABS, superior phosphorous copper, composite silver dot contacts.
- Design: Matte gray skin sensation, fine frosted, ultra-thin switch, matte spray paint.
- Durability: High density, high strength, anti-static, easy to clean, explosion-proof, high temperature flame retardant.
- Protection: Anti-scratch protective film.
- Certifications: RoHS, LVD, CE.
Specifications
| Attribute | Value |
|---|---|
| Brand Name | WESA |
| Model Number | YKL-HEI-01 |
| Switch Type | Push Button Switch |
| Current Rating | 16A |
| Voltage Rating | AC 250V |
| Material | Acrylic, flame retardant ABS, silver plated |
| Panel Material | Mirror Acrylic Panel |
| Copper Material | Superior phosphorous copper |
| Contact Material | Composite silver dot |
| Features | Mirror Acrylic Panel, Anti-scratch protective film |
| Certifications | RoHS, LVD, CE |
| Dimensions (Panel) | 83mm x 83mm (3.26in x 3.26in) |
| Mounting Depth | 35mm (1.37in) |
| Item Type | SWITCHES |
| Is Smart Device | No |
| Origin | Mainland China |
Installation Instructions
Before starting, ensure the main power supply to the circuit is turned OFF at the circuit breaker to prevent electrical shock.
- Prepare the Wiring: Identify the Live (L) and Neutral (N) wires from your electrical circuit. For multi-gang switches, identify the load wires (L1, L2, L3) for each light.
- Connect the Wires:
- Connect the main Live (L) wire from the power supply to the 'L' terminal on the switch.
- For 1-way switches, connect the load wire (to the light fixture) to the corresponding numbered terminal (e.g., '1' for 1 Gang, '1', '2' for 2 Gang, '1', '2', '3' for 3 Gang).
- The Neutral (N) wire typically bypasses the switch and connects directly to the light fixture.
- Secure the Switch: Mount the switch mechanism into the wall box using appropriate screws.
- Attach the Panel: Carefully attach the mirror acrylic panel to the switch mechanism. Ensure it clicks securely into place.
- Restore Power: Once installation is complete and all connections are secure, turn the main power supply back ON at the circuit breaker.
Operating Instructions
The WESA Wall Rocker Switch operates as a standard on/off switch for your lighting circuits.
- Turning On/Off: Press the rocker button to toggle the connected light(s) between ON and OFF states.
- Multi-Gang Operation: For 2 Gang or 3 Gang switches, each rocker button controls an independent lighting circuit.
Maintenance
- Cleaning: To clean the mirror acrylic panel, use a soft, damp cloth. Avoid abrasive cleaners or solvents that may damage the finish.
- Inspection: Periodically check the switch for any signs of damage, loose connections, or overheating. If any issues are observed, disconnect power and consult a qualified electrician.
- Protective Film: The switch comes with an anti-scratch protective film. This can be removed after installation for a pristine finish.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on/off | No power to the switch, loose wiring, faulty bulb, faulty switch. | Check circuit breaker. Ensure all wires are securely connected. Replace bulb. If problem persists, consult a qualified electrician. |
| Switch feels loose | Mounting screws are loose. | Turn off power, then tighten mounting screws. |
| Switch is hot to the touch | Overload, faulty wiring, internal short. | Immediately turn off power. Do not use the switch. Consult a qualified electrician. |
User Tips
- Some users have noted that the product looks good despite potential shipping damage to packaging. Always inspect the product itself upon arrival.
- The switch can be used in a commutated setup (e.g., 3-way switching) if wired correctly with appropriate additional switches. Consult a qualified electrician for complex wiring configurations.
Warranty and Support
The WESA Wall Rocker Switch comes with a 10-year warranty. For warranty claims, technical support, or service inquiries, please contact your retailer or the manufacturer directly.
A detailed user manual in PDF format is available for download: User Manual (PDF)