XinYi Sini Audio XY-ST21PRO

Contents

TPA3221 XY-ST21PRO BT Digital Amplifier Board User Manual

Model: XY-ST21PRO | Brand: XinYi Sini Audio

1. Introduction

The XY-ST21PRO is a high-performance 2.1-channel Bluetooth digital amplifier board designed for audio enthusiasts. Featuring dual TPA3221 chips, it delivers a powerful output of 100W + 100W for left/right channels and 200W for the subwoofer. This board incorporates advanced inductors for high current, low magnetic loss, and effective electromagnetic interference resistance, ensuring stable and high-quality audio reproduction. It supports multiple audio input methods including Bluetooth 5.2, AUX, and USB, with decoding capabilities for AAC, SBC, WAV, FLAC, APE, and MP3 formats.

TPA3221 XY-ST21PRO Bluetooth Digital Amplifier Board
Figure 1: TPA3221 XY-ST21PRO Bluetooth Digital Amplifier Board (General View)

2. Safety Warnings

  • Ensure the power supply is within the specified DC12-30V/5A range. Incorrect voltage or current can damage the board.
  • Avoid short circuits during installation and operation. The board includes short circuit protection, but caution is always advised.
  • Do not expose the board to moisture or extreme temperatures.
  • This product is not assembled for delivery; parts need to be assembled by the user. Exercise care during assembly to prevent damage to components.
  • ⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

3. Package Contents

The contents of your package may vary depending on the set purchased:

  • Set 1: Amplifier board x 1
  • Set 2: ST21 amplifier board x 1, Shell kit x 1
  • Set Three: Amplifier board x 1, Lead wire x 5

Note: Power and audio cables are NOT included. External 2.4G antennas (extension cords, antenna rods) are also NOT included and must be purchased separately if needed for extended Bluetooth range or metal casing installations.

Amplifier board and shell kit components
Figure 2: Example of components included in a kit version.

4. Product Variants and Dimensions

The XY-ST21PRO amplifier board is available in different configurations, primarily differing in how the potentiometers are integrated or connected:

  • Integrated Potentiometer Version: Potentiometers are directly mounted on the board.
  • External Potentiometer Version: Potentiometers are connected via wires, allowing for flexible panel mounting.
  • Integrated Panel Version: Similar to the integrated version but designed for direct mounting into a panel.
Dimensions of amplifier board variants
Figure 3: Dimensions of Integrated Potentiometer, External Potentiometer, and Integrated Panel versions.

Approximate dimensions:

  • Without casing: 111mm x 100mm x 23mm (4.37in x 3.94in x 0.91in)
  • With shell: 112mm x 102mm x 28mm (4.41in x 4.02in x 1.10in)
  • Potentiometer connection wire length: 20cm (for external potentiometer versions)

5. Specifications

Parameter Detail
Product NameBT Audio Amplifier Board
Product ModelXY-ST21PRO
Power SupplyDC12-30V/5A or above
DC Seat5.5-2.5mm
Bluetooth Version5.2
Audio InputBluetooth + AUX + USB Flash Drive + Sound Card
Bluetooth Audio DecodingAAC SBC
USB Audio FormatsWAV FLAC APE MP3
Left & Right Channel Output Power
  • 10W+10W @ 8Ω/12VDC
  • 20W+20W @ 4Ω/12VDC
  • 35W+35W @ 8Ω/24VDC
  • 70W+70W @ 4Ω/24VDC
  • 60W+60W @ 8Ω/30VDC
  • 100W+100W @ 4Ω/30VDC
Subwoofer Output Power
  • 10W @ 8Ω/12VDC
  • 20W @ 4Ω/12VDC
  • 35W @ 8Ω/24VDC
  • 70W @ 4Ω/24VDC
  • 60W @ 8Ω/30VDC
  • 100W @ 4Ω/30VDC
  • 200W @ 2Ω/30VDC
Protection MechanismsInput Undervoltage, Input Anti-Reverse Connection, Overheating, Overcurrent, Short Circuit Protection
Dual core TPA3221 chip and high power inductors
Figure 4: Dual core design with TPA3221 chips and high-power special inductors.
Quality components of the amplifier board
Figure 5: Overview of quality components including NE5532, solid capacitance, and large heat sink.

6. Setup and Installation

6.1 Power Supply Connection

Connect a DC12-30V/5A or above power supply to the 5.5-2.5mm DC seat or terminal block labeled 'POWER DC:12-30V'. Ensure correct polarity to prevent damage.

6.2 Speaker Connections

Connect your speakers to the designated terminals:

  • Left Channel Speaker: Connect to the 'L+' and 'L-' terminals.
  • Right Channel Speaker: Connect to the 'R+' and 'R-' terminals.
  • Subwoofer: Connect to the 'S+' and 'S-' terminals.

6.3 Audio Input Options

The amplifier supports multiple audio input sources:

  • Bluetooth (BT): The board has an onboard Bluetooth antenna. For extended range or if the board is enclosed in a metal casing, an external 2.4G antenna can be connected to the welded IPEX interface. (External antenna not included).
  • AUX Input: Connect an external audio source (e.g., smartphone, MP3 player) to the 'AUX IN' port.
  • USB Input: Insert a USB flash drive into the 'USB AUDIO' port for direct playback of WAV, FLAC, APE, or MP3 files. The 'U disk/sound card input' port can also be used.
Accurate wiring and function guide
Figure 6: Detailed wiring and function guide for the amplifier board.
Bluetooth antenna interface
Figure 7: Close-up of the welded IPEX interface for an external Bluetooth antenna.

7. Operating Instructions

7.1 Power On/Off

Use the 'POWER ON/OFF' switch located on the board to turn the amplifier on or off.

7.2 Volume and Tone Adjustments

The board features several potentiometers for fine-tuning your audio:

  • VOL (Main Volume): Adjusts the overall output volume.
  • SUB-VOL (Subwoofer Volume): Adjusts the volume level of the subwoofer output.
  • SUB-FREQ (Subwoofer Frequency): Adjusts the cutoff frequency for the subwoofer.
  • L&R BASS (Left & Right Channel Bass): Adjusts the bass level for the main stereo channels.
  • L&R TREBLE (Left & Right Channel Treble): Adjusts the treble level for the main stereo channels.

7.3 Playback Controls (for USB/Bluetooth)

The control button (often labeled 'MODE' or similar, near the USB port) provides playback functionality:

  • Click: Pause/Play.
  • Double Click: Next track.
  • Three Strikes: One hit (functionality may vary, typically for mode change or specific track selection).
  • Four Hits: Mode switch (cycles through BT, AUX, USB inputs).
  • Press and Hold: Power switch (long press to turn off/on).

Indicators for USB flash drive playback, AUX playback, and BT playback are present on the board to show the active input mode.

8. Maintenance

  • Keep the amplifier board clean and free from dust. Use a soft, dry cloth for cleaning.
  • Ensure adequate ventilation, especially if enclosed in a case, to prevent overheating.
  • Avoid touching the electronic components directly when the board is powered on.
  • If the board is installed in a metal casing, consider using an external Bluetooth antenna to maintain optimal signal reception.

9. Troubleshooting

  • No Sound:
    • Check power supply connection and ensure the board is powered on.
    • Verify speaker connections are secure and correct.
    • Ensure the correct audio input source (BT, AUX, USB) is selected.
    • Check volume levels on both the amplifier and the audio source.
  • Bluetooth Connection Issues:
    • Ensure the amplifier is in Bluetooth mode (check BT playback indicator).
    • Make sure the device you are trying to pair is discoverable.
    • If using a metal casing, consider installing an external 2.4G antenna.
    • Reduce distance between the amplifier and the Bluetooth device.
  • Distorted Sound:
    • Check if the power supply is stable and sufficient (DC12-30V/5A or above).
    • Reduce volume levels to avoid clipping.
    • Ensure speaker impedance matches the amplifier's capabilities.
    • Check audio cables for damage or loose connections.
  • Board Overheating:
    • Ensure adequate airflow around the heat sink.
    • Verify the load (speakers) is within the specified power and impedance ratings.
    • Reduce prolonged high-volume operation.

10. User Tips

No specific user tips from reviews or Q&A are available at this time. Always ensure proper power supply and speaker matching for optimal performance.

11. Item Guides & Documents

For additional detailed information, please refer to the official user manual PDF:

View User Manual (PDF)

12. Warranty and Support

For warranty information and technical support, please contact the seller or refer to the product's purchase documentation. Keep your proof of purchase for any warranty claims.

13. Statement of Compliance

This product complies with relevant industry standards. For specific compliance details, please refer to the product packaging or contact the manufacturer.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.