WESA BZH05

Contents

WESA Wall Socket Instruction Manual

Model: BZH05

1. Introduction

This manual provides essential information for the safe installation, operation, and maintenance of your WESA BZH05 Wall Socket. Please read this manual thoroughly before installation and keep it for future reference.

WESA Black Double Wall Socket

Figure 1: WESA Black Double Wall Socket (Example)

2. Safety Information

  • Always disconnect power at the main circuit breaker or fuse box before installing or servicing electrical outlets.
  • Installation should only be performed by a qualified electrician or a competent person familiar with electrical wiring and local regulations.
  • Ensure all wiring connections are secure and comply with local electrical codes.
  • Do not install in wet or damp locations unless the product is specifically rated for such environments.
  • This product is designed for indoor use only.
  • Do not exceed the rated current of 16A.

3. Setup and Installation

The WESA BZH05 Wall Socket is designed for wall-embedded installation. It is available in both grounded and non-grounded configurations. Always verify the specific type you have purchased before installation.

  1. Power Disconnection: Turn off the power to the circuit at the main electrical panel. Verify that the power is off using a voltage tester.
  2. Prepare Wiring: Carefully strip the insulation from the ends of the electrical wires (live, neutral, and ground if applicable) according to standard practices.
  3. Connect Wires: Refer to the wiring diagram below. Connect the wires to the corresponding terminals on the back of the socket.
    • Live (L): Connect the live wire (usually brown or black) to the terminal marked 'L'.
    • Neutral (N): Connect the neutral wire (usually blue) to the terminal marked 'N'.
    • Ground (PE): If your socket is a grounded type, connect the ground wire (usually green/yellow) to the terminal marked with the ground symbol (⏚).
    Ensure all connections are tight and secure.
  4. Mount the Socket: Carefully place the wired socket into the wall box. Secure it using the mounting screws provided.
  5. Attach Faceplate: Install the decorative faceplate over the socket, ensuring it snaps or screws into place securely.
  6. Restore Power: Turn the power back on at the main electrical panel. Test the socket with a known working appliance.
Back view of WESA socket with wiring terminals

Figure 2: Rear View and Wiring Terminals

4. Operating Instructions

The WESA BZH05 Wall Socket is designed for straightforward operation:

  • Insert the plug of your electrical appliance into the socket. Ensure the plug is fully inserted.
  • The socket provides power when an appliance is plugged in and the circuit is live.
  • This model does not feature a backlight or indication light.
  • Always ensure the appliance you are plugging in does not exceed the socket's rated current of 16A.

5. Maintenance

The WESA BZH05 Wall Socket is made from durable plastic with a smooth, anti-fouling, and fingerprint-free texture, making it easy to maintain.

  • Cleaning: To clean the surface, wipe it gently with a soft, slightly damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
  • Inspection: Periodically inspect the socket for any signs of damage, loose connections, or discoloration. If any issues are found, disconnect power and consult a qualified electrician.
  • Dust Removal: Ensure the socket openings are free from dust and debris.
Hand plugging into a WESA socket, showing smooth, anti-fouling texture

Figure 3: Smooth, Easy-to-Clean Surface

6. Troubleshooting

  • No Power:
    • Check if the circuit breaker has tripped or if a fuse has blown in your main electrical panel.
    • Ensure the appliance you are using is functional by testing it in another known working outlet.
    • If the issue persists, there might be a wiring problem. Disconnect power and consult a qualified electrician.
  • Plug Does Not Fit:
    • This socket is designed for EU standard plugs (Type C, E, F). Ensure your appliance plug is compatible with these standards.
    • Do not force a plug into the socket, as this can cause damage to both the plug and the socket.
  • Overheating:
    • If the socket feels warm to the touch, immediately unplug any devices and turn off power to the circuit. This could indicate an overload or a faulty connection. Consult a qualified electrician.

7. Specifications

BrandWESA
Model NumberBZH05
MaterialPlastic (High Temperature Flame Retardant)
Rated Current16A
Socket TypeSocket 220V (EU Standard)
Installation TypeWall Embedded
GroundingNon-Grounding or With Ground (variant dependent)
Is Smart DeviceNo
ApplicationResidential / General-Purpose
CertificationCE, RoHS, WEEE
Standard Dimensions (Front Plate)105mm x 83mm (4.13in x 3.27in)
Depth (Total)58mm (2.28in)
Depth (Internal)52mm (2.05in)
Front Plate Thickness18mm (0.71in)
Diagram showing dimensions of the WESA wall socket

Figure 4: Product Dimensions

8. User Tips

  • Aesthetic Appeal: Users appreciate the matte plastic finish and stylish appearance of the socket, making it a good choice for modern interiors.
  • Durability: The socket is noted for its durable construction.
  • Compatibility: While designed for EU standard plugs, always ensure your specific appliance plug matches the socket type (e.g., Type C, E, or F).

9. Warranty and Support

For warranty information, please refer to the terms provided by your retailer or the manufacturer at the time of purchase. For technical support or further inquiries, please contact your point of purchase.

A detailed user manual in PDF format may be available for download: View User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.