1. Introduction
This manual provides detailed instructions on the operation and maintenance of your Casio AE-1500WH digital sport watch. Please read this manual carefully to ensure proper use and to take full advantage of its features.
The Casio AE-1500WH is a robust digital watch featuring a 10-year battery, 100-meter water resistance, LED backlight, multiple alarms, a chronograph, and dual time capabilities, making it suitable for various activities.
2. General Guide
Your watch has four buttons: A (ADJUST), B (MODE), C (LIGHT), and D (START).
- Button A (ADJUST): Used for adjusting settings and confirming selections.
- Button B (MODE): Used to change between different modes (Timekeeping, Alarm, Countdown Timer, Stopwatch, Dual Time).
- Button C (LIGHT): Activates the LED backlight.
- Button D (START): Used to start/stop operations in Stopwatch and Countdown Timer modes, and to increase settings during adjustment.
In any mode, press Button B to change from mode to mode. In any mode, hold down Button A for about one second to return to the Timekeeping Mode.
3. Setup
3.1. Setting the Time and Date
- In the Timekeeping Mode, hold down Button A until the seconds start to flash, indicating the setting screen.
- Press Button B to move the flashing in the sequence: Seconds → Hour → Minutes → Day → Month → Year.
- While the desired setting is flashing, press Button D to change it.
- Press Button A to exit the setting screen.
Note: The day of the week is automatically displayed based on the date settings. The year can be set from 2000 to 2099.
3.2. Toggling 12-hour and 24-hour Timekeeping
In the Timekeeping Mode, press Button D to toggle between 12-hour and 24-hour timekeeping formats.
- 12-hour format: 'P' (PM) indicator appears for times from noon to 11:59 p.m. No indicator for midnight to 11:59 a.m.
- 24-hour format: Times are displayed from 0:00 to 23:59 without any indicator.
3.3. Setting Dual Time
The Dual Time Mode allows you to track time in a different time zone.
- Press Button B to enter the Dual Time Mode.
- Hold down Button A until the hour setting starts to flash.
- Press Button B to toggle between Hour and Minutes settings.
- While the desired setting is flashing, press Button D to increase the setting.
- Press Button A to exit the setting screen.
3.4. Setting Alarms
Your watch supports up to five independent multi-function alarms (AL1 to AL5) and an Hourly Time Signal.
- In the Alarm Mode, use Button D to scroll through the alarm screens (AL1 to AL5, and :00 for Hourly Time Signal).
- Once the desired alarm is displayed, hold down Button A until the hour setting starts to flash.
- Press Button B to move the flashing between Hour, Minutes, Month, and Day.
- While a setting is flashing, press Button D to change it.
- Press Button A to exit the setting screen.
Alarm Types:
- Daily Alarm: Set hour and minutes. Sounds daily at the set time.
- Date Alarm: Set month, day, hour, and minutes. Sounds once on the specific date.
- 1-Month Alarm: Set month, hour, and minutes. Sounds daily during the set month.
- Monthly Alarm: Set day, hour, and minutes. Sounds monthly on the set day.
4. Operating Modes
4.1. Timekeeping Mode
This is the default mode where the current time and date are displayed. From this mode, you can access all other modes by pressing Button B.
4.2. Alarms
When an alarm is turned on, the alarm tone sounds for 10 seconds at the preset time. For the snooze alarm (AL1), the alarm operation repeats seven times every five minutes.
- To Test the Alarm: In Alarm Mode, hold down Button D to sound the alarm.
- To Turn Alarms On/Off: In Alarm Mode, use Button D to select the desired alarm (AL2-AL5) or Hourly Time Signal (:00), then press Button A to toggle it on or off.
- To Select AL1 Operation: In Alarm Mode, select AL1, then press Button A to cycle through Alarm On, Alarm Off, and Snooze Alarm On.
- To Stop Alarm Tone: Press any button.
4.3. Countdown Timer
The countdown timer can be set from one minute to 24 hours. An alarm sounds when the countdown reaches zero.
- To Use: In Countdown Timer Mode, press Button D to start the countdown. Press Button D again to pause, and again to resume.
- To Set Start Time: In Countdown Timer Mode, hold down Button A until the hours setting flashes. Press Button B to move between hours and minutes, and Button D to change the value. Press Button A to exit.
- Auto-Repeat: To turn auto-repeat on/off, in Countdown Timer Mode, hold down Button A until the hours setting flashes, then press Button D. When auto-repeat is on, the countdown restarts automatically after reaching zero.
4.4. Stopwatch
The stopwatch measures elapsed time, split times, and two finishes, with a display range of 23 hours, 59 minutes, 59.99 seconds.
- Elapsed Time: Press Button D to start, Button D again to stop, and Button A to reset.
- Split Time: Press Button D to start, Button A to record a split time (SP displayed), Button A again to release the split, Button D to stop, and Button A to reset.
- Two Finishes: Press Button D to start, Button A when the first runner finishes (displaying their time), Button D when the second runner finishes, Button A to display the second runner's time, and Button A again to reset.
4.5. Backlight
The LED backlight illuminates the display for easy reading in the dark.
- To Turn On: In any mode, press Button C to illuminate the display for about one second.
5. Maintenance
5.1. Battery
The watch is powered by one lithium battery (Type: CR2032). The battery life is approximately 10 years, assuming alarm operation for 10 seconds/day and one backlight operation for 1.5 seconds/day.
When the battery runs low, the display may become dim or the backlight may not function as effectively. It is recommended to have the battery replaced by a qualified technician to ensure water resistance is maintained.
5.2. Water Resistance
This watch is water resistant to 10 BAR (100 meters). This means it is suitable for everyday use, swimming, and snorkeling. Do not operate buttons while the watch is wet or submerged.
5.3. General Care
- Clean the watch with a soft, dry cloth. For dirt or grime, use a soft cloth dampened with water and a mild neutral detergent, then wipe dry.
- Avoid exposing the watch to extreme temperatures, direct sunlight for prolonged periods, or strong magnetic fields.
- Avoid contact with gasoline, cleaning solvents, aerosols, adhesives, paints, etc., as they may damage the resin case and band.
- The backlight may be hard to see when viewed under direct sunlight. Frequent use of the backlight shortens battery life.
6. Troubleshooting
6.1. Auto Return Features
If you leave a screen with flashing digits for two or three minutes without performing any operation, the watch automatically saves any settings you have made up to that point and exits the setting screen.
6.2. Alarm Tone
If the alarm tone is sounding, press any button to stop it. Performing certain operations (like displaying the Timekeeping Mode setting screen or Alarm 1 setting screen) during the 5-minute snooze interval will cancel the current snooze alarm operation.
6.3. Backlight Visibility
The illumination provided by the backlight may be hard to see when viewed under direct sunlight.
6.4. Time/Date Reset
After the watch's battery is replaced, you may need to reset the time and date. The watch's built-in full automatic calendar makes allowances for different month lengths and leap years, so once set, it should not require frequent adjustment.
7. Specifications
| Feature | Detail |
|---|---|
| Module Number | 3502 |
| Accuracy | ±30 seconds a month (at normal temperature) |
| Timekeeping | Hour, minutes, seconds, p.m. (P), month, day, day of the week. Switchable between 12-hour and 24-hour formats. Full Auto-calendar (2000 to 2099). |
| Alarms | 5 Multi-function alarms (1 with snooze feature); Hourly Time Signal. Alarm types: Daily, Date, 1-Month, Monthly. |
| Countdown Timer | Measuring unit: 1 second. Input range: 1 minute to 24 hours (1-minute/1-hour increments). Auto-repeat function. |
| Stopwatch | Measuring unit: 1/100 of a second. Measuring capacity: 23:59'59.99". Measuring modes: Elapsed time, split time, two finishes. |
| Dual Time | Hour, minutes, seconds, p.m. (P). |
| Backlight | LED (light-emitting diode) backlight. |
| Battery | One lithium battery (Type: CR2032). Approx. 10 years battery life. |
| Water Resistance | 10 BAR (100 meters). |
| Case Material | Resin |
| Band Material | Resin |
Specifications are subject to change without notice.
8. User Tips
- The watch features a super legible, high-contrast display, making it easy to read the time and other information.
- The strap is comfortable for extended wear, though some users note the plastic strap can be a bit stiff initially compared to rubber.
- The watch offers many useful functions including dual time, 5 alarms, timer, and chronograph, all of which are relatively easy to set up.
- The backlight illuminates the display effectively in low-light conditions, though it uses two bulbs at the bottom rather than lighting the entire screen uniformly.
- For users with larger wrists, the watch design is generally well-suited.
- If applying a screen protector, be aware that the acrylic crystal is slightly convex, which might affect adhesion at the edges for flat protectors.
9. Support & Documentation
For further detailed instructions and diagrams, you can refer to the official user manual in PDF format:
View Official User Manual (PDF)
If you encounter any issues not covered in this manual or require further assistance, please contact the retailer or Casio customer support.