Introduction
This manual provides detailed instructions for the proper use and maintenance of your Casio F-91W or F-91WM-7A digital watch. Please read this guide thoroughly to ensure optimal performance and longevity of your timepiece. The Casio F-91W series is a classic digital watch known for its reliability, lightweight design, and essential features including timekeeping, daily alarm, and stopwatch functions.

Watch Controls and Display
Your Casio F-91W/F-91WM-7A watch features three buttons and a digital display. Understanding these components is key to operating your watch.
- Light Button (Top Left): Activates the backlight.
- Mode Button (Bottom Left): Cycles through different modes (Timekeeping, Alarm, Stopwatch).
- Adjust/Set Button (Right): Used for adjusting settings and advancing digits.

Initial Setup
Setting Time and Calendar
To set the time and date, follow these steps:
- From the regular timekeeping mode, press the Mode button (bottom left) three times to enter the time/calendar setting mode. The seconds digits will start flashing.
- Press the Adjust/Set button (right) to adjust the seconds.
- Press the Mode button (bottom left) to move to the hour setting. The hour digits will flash. Press the Adjust/Set button (right) to increase the number.
- Press the Mode button (bottom left) to move to the minute setting. The minute digits will flash. Press the Adjust/Set button (right) to increase the number.
- Continue pressing the Mode button (bottom left) to cycle through month, date, and day settings. Use the Adjust/Set button (right) to adjust each value.
- Once all settings are correct, press the Mode button (bottom left) to exit the setting mode and return to regular timekeeping.
Quick Digit Advance: When adjusting digits, press and hold the Adjust/Set button for more than 2 seconds to advance digits quickly. Release the button to stop the rapid advance.
Note: If no button is operated for a few minutes while a selection is flashing, the watch will automatically exit the setting mode and return to regular timekeeping.
Operating Modes
Reading the Display
In regular timekeeping mode, the display shows the hour, minute, second, AM/PM indicator, date, and day of the week. Pressing the Adjust/Set button (right) in regular timekeeping mode switches between 12-hour and 24-hour formats.
Stopwatch Operation
The stopwatch measures elapsed time up to 59 minutes, 59.99 seconds. To use the stopwatch:
- Press the Mode button (bottom left) once to enter Stopwatch mode. The display will show "ST" and "00:0000".
- Press the Adjust/Set button (right) to start the stopwatch.
- Press the Adjust/Set button (right) again to stop it.
- To reset the stopwatch, press the Light button (top left) while the stopwatch is stopped.
The stopwatch also supports Net time, Split time, and 1st-2nd place times. Refer to the "Stopwatch operation" diagram in the provided image for detailed visual instructions on these advanced functions.
Daily Alarm
The daily alarm sounds for 20 seconds at the preset time each day. To set and manage the alarm:
- Press the Mode button (bottom left) twice to enter Daily Alarm mode. The display will show "ALARM" and the current alarm time.
- Press the Adjust/Set button (right) to set the hour. Each press advances the hour. Hold for quick advance.
- Press the Light button (top left) to move to the minute setting. Press the Adjust/Set button (right) to set the minutes.
- To turn the alarm ON/OFF, press the Adjust/Set button (right) in alarm mode (without setting the time). The alarm-on-mark will appear/disappear.
- To stop the alarm sound when it goes off, press any button.
Sound Demonstration: In alarm mode, press and hold the Adjust/Set button (right) to sound the buzzer.
Hourly Time Signal
The hourly time signal causes the watch to beep every hour on the hour.
- To turn the hourly time signal ON/OFF, press the Light button (top left) in alarm mode. The time-signal-on-mark will appear/disappear.
Maintenance
Water Resistance
Your watch is water resistant up to 3 bar (30 meters). This means it is suitable for everyday use and can withstand splashes or brief immersion in water. However, it is NOT recommended for swimming, diving, or prolonged water exposure. Do not operate buttons while the watch is wet or submerged.
Battery Replacement
The watch uses one lithium battery (CR-2016, or BR-2020 for Module 1271 only). The battery life is approximately 7 years for CR-2016 and 10 years for BR-2020, assuming daily alarm operation for 20 seconds and one light operation for 1 second per day. When the display becomes dim or functions become erratic, it's time to replace the battery. Battery replacement should ideally be performed by a qualified watch technician to ensure water resistance is maintained.
Troubleshooting
- Confusing Display Information: If the display shows erratic or confusing information, it often indicates an incorrect entry sequence during setting. Please re-read the relevant section of this manual and try setting the watch again.
- Inaccurate Timekeeping: The watch has an accuracy of ±30 seconds per month. Minor deviations are normal. If your watch is losing or gaining significantly more than this (e.g., 12 seconds per month as reported by some users), it is within the expected range for this model. For persistent or excessive inaccuracy, consult a watch repair specialist.
- Backlight Appears Dim/Yellow: The F-91W series typically features a small LED backlight that illuminates the display from the side, often resulting in a yellowish or greenish tint. This is a characteristic of the model and not a defect. It is designed for basic visibility in low light, not for bright illumination.
- Authenticity Concerns (e.g., "Resist" arrow): Variations in markings, such as the presence or absence of a down arrow below "Resist," can occur between different production batches or regional models of the F-91W series. These differences do not necessarily indicate a fake product. Always purchase from reputable sellers to ensure authenticity.
Specifications
| Feature | Detail |
|---|---|
| Accuracy | ±30 seconds per month |
| Display Type | Digital (Hour, minute, second, am/pm, date, day) |
| Calendar System | Auto-calendar (set at 28 days for February) |
| Alarm Function | Daily alarm, Hourly time signal |
| Stopwatch | Measuring capacity: 59 minutes 59.99 seconds Measuring unit: 1/100th of a second Measuring modes: Normal time, net time, split time, 1st-2nd place times |
| Water Resistance | 3 bar (30 meters) |
| Battery Type | CR-2016 (or BR-2020 for Module 1271 only) |
| Battery Life | Approx. 7-10 years (depending on battery type and usage) |
| Case Material | Resin |
| Band Material | Resin |
| Dial Window Material | Resin |
| Movement Type | Digital |
| Features | Luminous, Backlight, Shock Resistant, LED Display, Full Calendar, Multiple Time Zone, Alarm, Week Display |
User Tips
- Check Size: Some users find the watch to be small, especially for adult wrists. Consider the dimensions if you prefer a larger timepiece. It can be a great fit for teenagers or those who prefer a compact watch.
- Keep Documentation: If your watch comes with original packaging and documentation, keep it for future reference regarding authenticity and specific model details.
- Simple and Functional: This watch is praised for its elegant, functional, and useful design. Embrace its classic simplicity.
Frequently Asked Questions (FAQ)
- Q: Is this watch authentic, given variations in markings like the "Resist" arrow?
- A: Minor variations in watch markings, such as the presence or absence of a down arrow below "Resist," can occur due to different manufacturing batches or regional models. These are not definitive indicators of authenticity. Always purchase from authorized retailers or reputable sellers to ensure you receive a genuine Casio product.
- Q: The backlight on my F-91W-1 appears yellow and is not very bright. Is this normal?
- A: Yes, the F-91W series typically uses a small LED light that illuminates the display from the side, often producing a yellowish or greenish glow. This is characteristic of the model and is intended for basic visibility in dark conditions, not for strong illumination. It is not considered a defect.
- Q: My watch is losing about 12 seconds per month. Is this within specifications?
- A: The stated accuracy for this watch is ±30 seconds per month. A loss of 12 seconds per month falls well within this acceptable range. Digital watches, especially at this price point, are not expected to have atomic clock precision. If you experience significantly greater deviation, you may consider consulting a watch repair specialist.
- Q: Does the F-91WM-7A model have a metal case and resin straps?
- A: According to product specifications, the case material for this series is Resin, and the strap material is also Resin. While some models might have a metallic finish on the resin case, the core material remains resin for its lightweight and durable properties.
Warranty and Support
For warranty information, service, or support, please refer to the official Casio website or contact your authorized Casio dealer. Keep your proof of purchase for any warranty claims.
A user manual PDF is available for download from the manufacturer's website for more detailed information: Casio F-91W/F-91WM-7A User Manual PDF