1. Introduction
This manual provides essential information for the safe installation, operation, and maintenance of your WESA wall-mounted electrical sockets and switches. Please read this manual thoroughly before installation and keep it for future reference.

Figure 1: WESA Brown Wooden Double Wall Socket (16A 250V~)
Description: A brown, wood-grain textured wall plate featuring two circular electrical sockets, rated 16A 250V~. The WESA logo is visible in the top left corner.
Product Features:
- High-Quality Material: Constructed from durable, high-temperature flame-retardant plastic for enhanced safety and longevity.
- Elegant Design: Smooth texture with a brown wooden finish, designed to complement various interior decors.
- Robust Construction: Firm shell with anti-drop and impact resistance.
- Versatile Installation: Suitable for various indoor environments including bedrooms, living rooms, kitchens, and bathrooms.
- Multiple Configurations: Available in various types including standard sockets, sockets with USB ports, and wall switches.
2. Safety Information
- WARNING: Always turn off the main power supply at the circuit breaker or fuse box before attempting any electrical installation or maintenance. Failure to do so can result in serious injury or death.
- Installation should only be performed by a qualified electrician or a competent person familiar with electrical wiring and local electrical codes.
- Do not install in wet conditions or areas with excessive humidity unless the product is specifically rated for such environments.
- Ensure the product's voltage and current ratings match your electrical system's requirements.
- Do not overload the socket.
3. Setup and Installation
Tools Required:
- Screwdriver (Phillips and/or Flathead)
- Wire Strippers
- Voltage Tester
- Pencil
- Measuring Tape
Installation Steps:
- Turn Off Power: Locate the circuit breaker or fuse box that controls the power to the installation area and turn it off. Verify with a voltage tester that the power is off.
- Prepare the Wall Box: Ensure you have a standard wall-mounted electrical box installed in your desired location. Refer to the product dimensions for compatibility.
- Remove Old Device (if applicable): Carefully disconnect and remove any existing socket or switch from the wall box.
- Prepare Wires: Strip approximately 10-15mm (0.4-0.6 inches) of insulation from the ends of the electrical wires (Live, Neutral, and Ground, if applicable).
- Connect Wires:
- Connect the Live wire (usually brown or red) to the terminal marked 'L'.
- Connect the Neutral wire (usually blue or black) to the terminal marked 'N'.
- If your model includes grounding and your wiring supports it, connect the Ground wire (usually green/yellow) to the terminal marked with the ground symbol (⏚). Note: Some WESA models are non-grounding.
Ensure all connections are secure and no bare wire strands are exposed outside the terminals.
- Mount the Device: Carefully push the wired socket/switch into the wall box. Secure it using the mounting screws provided, ensuring it is level.
- Attach Faceplate: Snap or screw the decorative faceplate onto the mounted device.
- Restore Power: Turn the main power supply back on at the circuit breaker.
- Test: Test the functionality of the socket/switch with a suitable appliance or device.

Figure 2: Product Dimensions and Rear View
Description: A diagram showing the front, top, and side views of the WESA socket with detailed measurements in millimeters and inches. The rear view displays the internal wiring mechanism and mounting points. Dimensions include 115mm (4.52in) width, 82mm (3.22in) height, and 37mm (1.45in) depth for the visible part, with a total depth of 65mm (2.55in) including the internal mechanism.
4. Operating Instructions
Standard Sockets:
Insert the plug of your electrical appliance into the socket. Ensure the plug is fully inserted. Do not force plugs into the socket.
Sockets with USB Ports (e.g., Model Type "1 Socket and 2 USB"):

Figure 3: WESA Single Socket with 2 USB Ports (10A 250V~)
Description: A brown, wood-grain textured wall plate featuring one circular electrical socket and two USB charging ports. Rated 10A 250V~.
For models equipped with USB charging ports, connect your USB-compatible devices (e.g., smartphones, tablets) directly to the USB ports using a compatible USB cable. The USB ports provide power for charging without needing an adapter.
Wall Switches:
For models that are wall switches, press the switch rocker to turn connected lights or appliances ON or OFF.
Important: Do not exceed the maximum rated current or power for the socket or switch.
5. Maintenance
- Cleaning: Disconnect power before cleaning. Wipe the surface with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- Inspection: Periodically inspect the socket/switch for any signs of damage, cracks, discoloration, or loose connections. If any damage is observed, turn off power and have it inspected by a qualified electrician.
- No User-Serviceable Parts: There are no user-serviceable parts inside the unit. Do not attempt to open or repair the device yourself.
6. Troubleshooting
No Power from Socket:
- Check Circuit Breaker: Verify that the circuit breaker for that outlet has not tripped. Reset it if necessary.
- Check Wiring: Ensure all wires are securely connected to the terminals. If unsure, consult a qualified electrician.
- Test with Another Device: Try plugging in a different, known-working appliance to rule out an issue with your device.
Socket/Switch Feels Loose:
- Turn off power. Gently tighten the mounting screws. If the issue persists or the wall box is damaged, consult an electrician.
Overheating or Burning Smell:
- IMMEDIATELY turn off power to the circuit. Unplug all devices. This indicates a serious electrical issue. Do not use the socket/switch and contact a qualified electrician immediately.
7. Specifications
| Feature | Specification |
|---|---|
| Model Number | EP-05-MM |
| Brand | WESA |
| Material | Plastic (Flame Retardant) |
| Socket Type | EU Standard (220V) |
| Rated Current | 16A (for standard sockets); 10A (for USB socket variants) |
| Installation Type | Wall Embedded |
| Grounding | Non-Grounding (some variants); With Ground (other variants) |
| Dimensions (L x W x D) | 115mm x 82mm x 37mm (visible part) |
| Certifications | CE, RoHS, WEEE |
| Application | Residential / General-Purpose |
8. User Tips
- Always prioritize safety: Double-check that power is off before starting any installation or inspection.
- For optimal safety and compliance with local regulations, consider hiring a certified electrician for installation.
- Regularly check the condition of your wall sockets and switches to ensure they remain safe and functional.
- When using USB charging ports, ensure your device's charging requirements are compatible with the port's output.
9. Warranty and Support
WESA products are manufactured to high-quality standards and are covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to your purchase documentation for specific warranty terms and duration.
For technical support, warranty claims, or further assistance, please contact your retailer or the manufacturer's customer service department.
Contact Information: [Please refer to your purchase invoice or the seller's website for specific contact details.]