1. Introduction
This manual provides essential information for the safe and effective use of your HTBCCHB Rubber Dust Nuts Covers. This product is a universal decorative and protective accessory designed for wheel hubs, offering dust-proof and aesthetic functions. It is suitable for enhancing the appearance and protecting aluminum alloy wheel hubs of specified sizes on various vehicles, including 50cc, 70cc, 110cc, and 125cc ATVs, Go Karts, Quad Bikes, and 4-wheel motorcycles.
Please read this manual thoroughly before installation and use.
2. Safety & Warnings
Important Safety Instructions:
- Improper installation and use may cause the decorative cover to fall off, potentially affecting driving safety.
- During installation, ensure that the decorative cover is completely fitted with the wheel hub clips to prevent it from falling off while driving.
- The product contains plastic parts and must be placed out of the reach of children to prevent accidental ingestion or scratches.
- After installation, gently pull each cover to check for firmness and confirm there is no looseness before driving.
- Avoid prolonged exposure to sunlight and high temperatures to prevent aging and deformation of the material.
- Modification or violent disassembly of the decorative cover is prohibited to avoid structural damage.
3. Specifications
| Attribute | Value |
|---|---|
| Product Name | Wheel dust cover |
| Model Name | ATV universal |
| Brand Name | HTBCCHB |
| Material | Rubber |
| Special Features | Dustproof |
| Item Weight | 0.09kg (approx. 100g per 4 pcs) |
| Item Height | 4cm (40mm) |
| Item Width | 5.5cm (55mm at base) |
| Item Length | 5.5cm |
| Item Diameter (Inner) | 4.2cm (42mm) |
| Top Diameter | 4.4cm (44mm) |
| Quantity | 4 pieces per lot |
Product Dimensions
4. Setup & Installation
Follow these steps for proper installation:
- Installation Preparation: Park the vehicle stably on a flat surface. Clean the installation position at the center of the wheel hub, ensuring all dust and debris are removed.
- Alignment Installation: Align the decorative cover with the central hole of the wheel hub. If the cover has a five-star pattern, ensure its direction is consistent for a uniform appearance.
- Press to Fix: Press the edge of the decorative cover evenly with force. Ensure the clips fully engage with the wheel hub slots. Confirm there is no looseness.
- Repeat Operation: Install the remaining 3 decorative covers following the same steps to maintain a consistent appearance across all wheels.
Visual Guide
Product Overview Video
Video 1: A brief demonstration showcasing the rubber dust covers from various angles.
5. Operating Instructions
After installation, perform the following checks:
- Function Verification: Gently shake each decorative cover to confirm there is no displacement or falling off.
- Start the vehicle and check for any abnormal noise during low-speed driving. If any unusual sounds or looseness are detected, stop immediately and re-check the installation.
6. Maintenance
- Cleaning: Regularly clean the dust covers with a soft cloth and mild soap to remove dirt and grime. Avoid harsh chemicals that may damage the rubber material.
- Inspection: Periodically inspect the covers for any signs of wear, cracking, or looseness. Replace any damaged covers promptly to maintain protection and appearance.
- Storage: Uninstalled products should be stored in a dry and well-ventilated place to avoid scratches or moisture damage.
7. Troubleshooting
- Cover feels loose after installation: Re-check that the clips are fully engaged with the wheel hub slots. Apply even pressure around the edge during installation.
- Cover falls off during driving: This indicates improper installation. Ensure the wheel hub area is clean and dry before installation, and that the cover is securely fastened. Refer to the "Setup & Installation" section.
- Cover appears deformed or aged: This can be caused by prolonged exposure to direct sunlight and high temperatures. Ensure proper storage for uninstalled covers and consider replacing severely affected covers.
8. User Tips
- These covers are noted by users as being "very good hidden hubs for quad arc," suggesting they integrate well visually.
- Compatibility Note: While designed for universal ATV fitment, this product is explicitly stated by the seller as *not* suitable for the 2021 Polaris 570 all-terrain vehicle. It is generally compatible with ATV 150 models. Always verify dimensions before purchase.
9. Warranty & Support
For detailed product information, including additional guides and documents, please refer to the official user manual PDF available at: User manual (PDF).
For any further assistance or inquiries, please contact the manufacturer or your retailer.
Manufacturer Information:
- Company: Yongkang Hongtian Trading Co., Ltd.
- Address: Changcheng Village, Yongkang Economic Development Zone, Jinhua City, Zhejiang Province Room 302, 3rd Floor, No. 66 Jinbi Road, China
- Email: 841996743@qq.com
- Phone: +86-13018090962
EU Authorized Representative:
- Company: MJCM SARL
- Address: 78 avenue des Champs Elysees Bureau 326
- Email: mjcm190928@gmail.com
- Phone: +33-767213611