zemismart ZM02

Contents

Zemismart Matter WiFi Smart Electric Curtain Motor (ZM02) Instruction Manual

1. Introduction

Thank you for choosing the Zemismart Matter WiFi Smart Electric Curtain Motor (ZM02). This device is designed to motorize your curtains, offering convenient control through voice commands, mobile applications, and a dedicated remote control. It integrates seamlessly with popular smart home platforms such as Apple Home (HomeKit), SmartThings, Amazon Alexa, and Google Home, providing a modern and intelligent solution for your window treatments.

2. Safety Information

  • Ensure the power supply is disconnected before installation or maintenance.
  • This product is designed for indoor use only.
  • Do not expose the motor to moisture or extreme temperatures.
  • Keep children and pets away from moving curtains.
  • Do not attempt to disassemble or repair the motor yourself. Contact qualified personnel for service.
  • Ensure all wiring is done according to local electrical codes.

3. Package Contents

Please check that all items are present in your package:

  • Smart Electric Curtain Motor
  • Curtain Track Sections (Splicing Kit)
  • Drive Belt
  • Pulleys and Connectors
  • End Caps
  • Single-Channel Remote Controller
  • Mounting Brackets (Top Brackets)
  • Power Adapter
  • Instruction Manual (PDF available at User Manual PDF)

4. Specifications

FeatureDetail
Product ModelZM02
Power SourceAC100-240V, 50/60Hz
Rated Torque1.2Nm
Max Current0.5A
Rated Power45W
Speed100 RPM
Wireless CommunicationYes (Matter WiFi)
Battery IncludedNo
Inbox AdaptorYes
High-Concerned ChemicalNone
OriginMainland China

5. Setup Guide

This section guides you through the physical installation of your electric curtain system.

Demonstration of the Zemismart Smart Electric Curtain Motor opening and closing tall living room curtains.

5.1. Step 1: Splicing Track

  1. Insert the 200mm connector into one track section.
  2. Connect another track section to the connector.
  3. Ensure the track sections are aligned and the connector is centered.
  4. Secure the connector with screws after confirming the track length.

5.2. Step 2: Cut the Belt

  1. Thread the drive belt through the Master Driver.
  2. Guide the longer side of the belt through the track's groove.
  3. Fasten the belt at the end of the groove, ensuring the belt length matches the track length.

5.3. Step 3 & 4: Pulley Assembly

  1. Place the Master Driver onto the track.
  2. Thread the belt through the groove of the track.
  3. Attach a belt buckle to the end of the belt.
  4. Install the other belt buckle (pulley wheel).
  5. Place the pulley onto the track.

5.4. Step 5: Ending Assembly

  1. Install the belt gauge on the track side near the Master Driver.
  2. Place the pulley onto the belt at the end of the gauge.
  3. After sampling, pull the pulley back and forth to check for smooth movement.
  4. Remove the gauge buckle and place the pulley and belt onto the Master Driver.
  5. Fasten a belt buckle to the end of the belt.
  6. Install the other belt buckle (pulley wheel) facing the Master Driver.
  7. Assemble the remaining pulleys.

5.5. Step 6: Motor Installation

  1. Install the track onto the wall using the top mounting brackets. Ensure one bracket is used approximately every 60cm.
  2. Insert the curtain motor into the track.
  3. Connect the motor to the power supply.

6. Operating Instructions

6.1. Limit Setting

Automatically Set Limit

  • Control the curtain to open. It will automatically stop when it reaches the fully open position, completing the open limit setting.
  • Control the curtain to close. It will automatically stop when it reaches the fully closed position, completing the close limit setting.

Delete Limit

  • Method 1 (Remote Control): Press the 'Stop' button 3 times quickly, then the 'Up' button 3 times quickly, then the 'Stop' button 3 times quickly.
  • Method 2 (Motor Button): Press the motor button 5 times quickly.

6.2. Remote Control

Zemismart Single-Channel Remote Controller

The remote control features Up/Open, Stop, and Down/Close buttons, along with an indicator light.

Pairing Remote Control

  1. Press the motor button 3 times quickly.
  2. Then, press the 'Up' button on the remote control 3 times quickly.

Deleting Remote Control

  • Delete all remotes from motor: Press 'Stop' 3 times, then 'Down' 3 times, then 'Stop' 3 times.
  • Delete current channel remote from motor: Press 'Stop' 3 times, then 'Up' 3 times, then 'Stop' 3 times.
  • Delete current remote from motor: Press 'Stop' 3 times, then 'Down' 3 times, then 'Stop' 3 times.

Switching Control Direction

If the curtain movement direction is opposite to the remote control input, you can switch it:

  • Press 'Stop' 3 times quickly, then 'Up' 3 times quickly, then 'Stop' 3 times quickly. Repeat to toggle.

6.3. APP Control (Matter Integration)

Zemismart Smart Curtain APP Control Interfaces

The curtain motor can be controlled via Apple Home, Amazon Alexa, Google Assistant, and SmartThings apps.

This device supports Matter, allowing integration with various smart home ecosystems. A Matter-certified ecosystem smart home app and a compatible Home Hub are required for setup.

General Matter Pairing Process

  1. Ensure the motor is in pairing mode (indicator light flashing).
  2. Turn on Wi-Fi on your smartphone.
  3. Open your chosen smart home app (Apple Home, Google Home, SmartThings, Alexa).
  4. Scan the Matter QR code located on the motor.
  5. Follow the on-screen instructions within the app to complete the pairing.

Pairing with Apple Home (HomeKit)

  1. Open the Apple Home app, tap 'Add' (+), then 'Add or Scan Accessory'.
  2. Scan the Matter QR code on the motor.
  3. Select 'Add to Home' and follow the prompts to assign it to a room.

Pairing with Google Home

A Google speaker or compatible Google Home Hub is required.

  1. Ensure the motor is flashing (pairing mode).
  2. Open the Google Home app, tap 'Add' (+), then 'Matter-enabled device'.
  3. Scan the Matter QR code on the motor.
  4. Tap 'Agree', then 'Add to Google Home'.
  5. Choose a location for your device, then tap 'Continue' and 'Done'.

Pairing with SmartThings

A SmartThings Hub is required.

  1. Ensure the motor is flashing (pairing mode).
  2. Open the SmartThings app, tap 'Add' (+), then 'Add device'.
  3. Select 'Matter' under 'Partner devices' and tap 'Add'.
  4. Scan the Matter QR code on the motor.
  5. Tap 'Done' to complete the setup.

6.4. Voice Control

Voice Control with Siri, Alexa, Google Home, Bixby

Supports voice control via Siri, Alexa, Google Home, and Bixby. Requires a corresponding voice speaker.

Once your curtain motor is successfully paired with your smart home ecosystem, you can use voice commands through your compatible smart speakers (e.g., Apple HomePod, Amazon Echo, Google Nest, Samsung Bixby devices).

  • Example Commands:
  • "Hey Siri, close the curtains."
  • "Alexa, open the blinds."
  • "Hey Google, set curtains to 50%."

6.5. Power Off Manual Function

Power Off Manual Function

In case of power unavailability, the curtains can be opened and closed manually by hand.

Should there be a power outage or if the motor is disconnected from power, the curtains can still be operated manually by gently pulling them open or closed by hand.

6.6. Applicable Curtains

Applicable Curtains: Center Open and Side Open

Supports both center-open and side-open curtain configurations.

The Zemismart Electric Curtain Motor system supports two common curtain opening styles:

  • Center Open: Curtains open from the middle, moving to both sides.
  • Side Open: Curtains open from one side, moving to the other.

7. Maintenance

  • Regularly inspect the track for any dust, debris, or obstructions that might hinder smooth operation. Clean with a soft, dry cloth.
  • Do not use abrasive cleaners or solvents on the motor unit or track, as this may damage the finish or internal components.
  • Check the drive belt periodically for any signs of wear or slackness.

8. Troubleshooting

  • Motor not responding: Check if the motor is properly plugged into a power outlet. Ensure the remote control batteries are not depleted. Verify the app connection and Wi-Fi signal strength.
  • Curtains not opening/closing fully: The travel limits may need to be reset. Follow the 'Automatically Set Limit' instructions in Section 6.1.
  • Unusual noise during operation: Check the track for any obstructions. Ensure the drive belt is properly tensioned and not rubbing against any parts.
  • App connectivity issues: Ensure your Wi-Fi network is stable and your Matter Home Hub is online and within range of the motor. Try restarting your router and the motor.
  • Remote control not working: Check battery. Re-pair the remote control following instructions in Section 6.2.

9. User Tips

  • Bracket Compatibility: The manual indicates the use of top brackets for installation. If your specific window frame or ceiling structure requires side-mount brackets, these may need to be acquired separately as they are not typically included in the standard kit.
  • Matter Hub Placement: For optimal performance and reliable connectivity, ensure your Matter Home Hub is placed centrally and within a reasonable range of all your Matter devices, including the curtain motor.

10. Warranty and Support

For detailed warranty information, technical assistance, or to report any issues with your Zemismart Matter WiFi Smart Electric Curtain Motor, please refer to the official Zemismart website or contact their customer support directly. Keep your purchase receipt as proof of purchase for warranty claims.

© 2023 Zemismart. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.