1. Introduction
The EJEAS V6 Pro+ is a high-performance, stable Helmet Bluetooth Intercom system designed for motorcycle riders. It offers reliable communication, phone call management, music playback, and GPS navigation audio. With its robust design, including IP67 waterproofing and HD-Voice technology, it ensures a safe and convenient riding experience.
Key features include:
- Bluetooth 5.1 for stable connections.
- Support for up to 6 riders with 2 riders talking simultaneously.
- Maximum intercom distance of 800 meters.
- Automatic phone call reception.
- CVC noise reduction for clear audio.
- IP67 waterproof rating.
- Long battery life for music and intercom use.
- Compatibility with EUC remote control and SafeRiding APP.
2. Package Contents
Please check the box for the following items:

- EJEAS V6 Pro+ Main Unit
- EUC Remote Controller (Optional, may be sold separately)
- USB Type-C Charging Cable
- Helmet Mounting Clip
- Headphone Velcro Pads
- Earphone Set (with microphone)
- User Manual
3. Setup and Installation
3.1 Device Overview
Familiarize yourself with the buttons and interfaces on your V6 Pro+ unit:

Button Functions:
- MOTOR/A button: Power on/off, Intercom A pairing/connection.
- B button: Intercom B pairing/connection.
- C button: Intercom C pairing/connection.
- D button: Intercom D pairing/connection.
- E button: Intercom E pairing/connection.
- Phone button: Answer/end calls, play/pause music, connect to phone, last number redial.
- Volume +: Increase volume, next music (long press).
- Volume -: Decrease volume, previous music (long press).
- Power off: (Not a separate button, usually part of MOTOR/A long press).
- Antenna: For intercom signal.
- Earphone interface / USB charger interface: Connect headset and charging port.
3.2 Helmet Installation
Follow these steps to correctly install the V6 Pro+ on your helmet:

- Attach the mounting clip to the edge of your helmet, ensuring it is secure.
- Slide the V6 Pro+ main unit onto the mounting clip until it clicks into place.
- Install the speakers inside the helmet, positioning them near your ears. Use the provided Velcro pads to secure them.
- Route the microphone to a suitable position near your mouth.
- Ensure the headphone jack is fully inserted into the device to prevent water ingress, especially in rainy conditions.
4. Operating Instructions
4.1 Power On/Off
- Power On: Long press the MOTOR/A button for about 2 seconds until the main device light flashes.
- Power Off: Press the MOTOR/A button again to power off.
4.2 Connecting with Phone (GPS/MP3)
- Long press the Phone button for 5 seconds until the red and blue lights flash alternately.
- On your phone (or GPS/MP3 device with Bluetooth), enable Bluetooth and search for