Introduction
Thank you for choosing the COOSPO CS300 Wireless Bicycle Computer. This device is designed to enhance your cycling experience by providing accurate data tracking and seamless connectivity. Featuring a clear 2.6-inch display, GPS functionality, Bluetooth and ANT+ compatibility for external sensors, and IPX7 waterproofing, the CS300 is a reliable companion for your rides. This manual will guide you through the setup, operation, and maintenance of your new cycling computer.
COOSPO CS300 Wireless Bicycle Computer
Product Accessories
The COOSPO CS300 package includes the following items:
- COOSPO CS300 Bicycle Computer Unit
- USB Type-C Charging Cable
- Bike Mount
- Rubber Bands for Mount Installation
- Lanyard
- User Manual (this document)
COOSPO CS300 Package Contents
Setup Guide
1. Charging the Device
Before first use, please fully charge your COOSPO CS300. Use the provided USB Type-C cable and a standard DC 5V power adapter.
Charging the CS300
2. Installation
Follow these steps to install the bike computer mount on your handlebar:
- Place the mount base on your handlebar.
- Secure the mount using the rubber bands.
- Align the CS300 with the mount.
- Twist the CS300 clockwise until it locks securely into place.
Bike Computer Installation
3. Initial Power On and GPS Positioning
To power on the device, long press the left button (C) for 2 seconds. For initial satellite positioning, please wait 30-90 seconds in an open outdoor area. Ensure the bike computer remains stationary during this process to acquire the best satellite signal. The date and time will be set automatically upon successful positioning.
4. Connecting to CoospoRide APP
To connect your CS300 to the CoospoRide app:
- Do NOT pair the bike computer directly through your phone's Bluetooth settings.
- Download the CoospoRide APP from the Apple App Store or Google Play Store.
- Enable Bluetooth and location permissions for the CoospoRide app on your phone.
- Open the CoospoRide APP, navigate to Bike Computer > Add Device > CS300, then click on the Device ID to connect.
- Ensure Bluetooth and location permissions are enabled for the app before connecting. Some phone models may not be able to search for Bluetooth devices without proper authorization.
Connecting to CoospoRide App
5. Adding External Sensors
The CS300 automatically recognizes and adds compatible Bluetooth and ANT+ sensors (e.g., heart rate monitors, speed sensors, cadence sensors, power meters). When searching, sensor icons and data will flash; once connected, they will remain solid.
To add sensors via the app: Open CoospoRide > Devices > CS300 > Add Sensor.
For sensor compatibility information, please visit: www.coospo.com/faq
Add Sensor Setting Screen
Operating Instructions
Button Functions
The CS300 features three buttons for navigation and control:
| Button | Function |
|---|---|
| Left Button (C) |
|
| Middle Button (▶▶) |
|
| Right Button (>) |
|
Icons Glossary
Understand the various icons displayed on your CS300 screen:
| Icon/Text | Meaning | Icon/Text | Meaning |
|---|---|---|---|
| 📶 | GPS signal on | ((())) | Speed sensor connected |
| No GPS signal | No GPS signal | ❤ | Heart Rate Monitor |
| GPS off, no signal | GPS off, no signal | Speed Sensor | Speed Sensor |
| 🔋 | Battery | Cadence Sensor | Cadence Sensor |
| ▶ | Start/Ride | ⚡ | Power |
| ⏸ | Stop | ODO | Odometer |
| AUTO | Auto-Pause | DST | Distance |
| 🚲 | Indoor Ride | AST | Ascent |
| Ⓘ | Bluetooth Connection with App | GRA | Gradient |
| AVG | Average | CAL | Calorie |
| MAX | Max | LAP | Lap |
| %MAX | Percentage of max | ⚡ | Power Meter |
| mph | Miles per hour | UTC | Time zone |
| km/h | Kilometers per hour | ALT | Altitude |
| ▲ | Speed above average | C°F | Temperature (may vary from actual environment) |
| ▼ | Speed below average |
Ride Functions
- Start: Short press the Middle Button (▶▶) for a 3-2-1 countdown on the data page. Your ride will begin with the start icon displayed.
- Lap: Short press the Left Button (C) during a ride to mark a lap. The lap display will show for 10 seconds; any key press will cancel the lap display.
- Pause/Auto-Pause: Short press the Middle Button (▶▶) to pause the ride. Press it again to resume. If auto-pause is enabled, the ride will automatically pause when you stop moving or your speed falls below a set value, preventing undesired data recording.
- Save: Long press the Middle Button (▶▶) to save your ride data.
- Check Data: Short press the Right Button (>) to switch between data pages and review data from your last ride. More detailed activity data can be viewed on the CoospoRide APP.
Customizing Data Pages
The CS300 comes with several pre-configured data pages. You can customize these pages or enable additional ones via the CoospoRide APP.
- Page 1: Speed, Time, Distance, Gradient, Altitude
- Page 2: Speed, Power, Cadence, Heart Rate, Ascent
- Page 3: Average Speed, Time, Average Altitude, Average Gradient, Distance
- Page 4: Max Speed, Time, Calories, Temperature, Distance
- Page 5: Speed, Time, Distance, Gradient, Odometer (closed by default; enable in CoospoRide > Devices > Page Settings)
Page data can be fully customized within the CoospoRide APP.
Customizable Data Pages
Dynamic Zone Chart
The Dynamic Zone Chart visually represents your current performance zone for speed, cadence, heart rate, and power. For example, if your current speed is 25.6 km/h, it might indicate you are in zone 3 of speed.
These zones can be set and customized in the CoospoRide app: CoospoRide > Devices > CS300 > ALL Settings > My Stats.
Dynamic Zone Chart Display
Device Settings (Advanced)
To access advanced settings on the device:
- Access Settings: Long press the Right Button (>) for 2 seconds. The setting page will blink to indicate it's active.
- Navigate Pages (P1-P5): Short press the Right Button (>) to switch between setting pages.
- Enter/Confirm Setting: Short press the Middle Button (▶▶) to enter or confirm the current setting.
- Adjust Values: Use the Right Button (>) to add values or cycle through options. Use the Middle Button (▶▶) to confirm a digit and move to the next.
- Save and Return: Short press the Left Button (C) to save changes and return to the main display.
- Auto-Save: Settings will automatically save and exit after 10 seconds of no button operation.
P1: Add Sensor
As described in the Setup Guide, this page allows the device to search for and connect to external sensors.
P2: Time Zone
Adjust the time zone setting. Use the Right Button (>) to add values and the Middle Button (▶▶) to confirm the current digit and set the next digit.
P3: Wheel Size
Set your bicycle's wheel size for accurate speed and distance calculations. Use the Right Button (>) to add values and the Middle Button (▶▶) to confirm the current digit and set the next digit.
Common Wheel Size and Circumference (L in mm):
| Wheel Size | Circumference (mm) | Wheel Size | Circumference (mm) | Wheel Size | Circumference (mm) |
|---|---|---|---|---|---|
| 12 x 1.75 | 935 | 24 x 2.00 | 1925 | 26 x 1.40 | 2005 |
| 14 x 1.5 | 1020 | 24 x 2.125 | 1965 | 26 x 1.50 | 2010 |
| 14 x 1.75 | 1055 | 26 x 1.75 | 2023 | 27 x 1 | 2145 |
| 16 x 1.5 | 1185 | 26 x 1.95 | 2050 | 27 x 1-1/8 | 2155 |
| 16 x 1.75 | 1195 | 26 x 2.00 | 2055 | 27 x 1-1/4 | 2161 |
| 18 x 1.5 | 1340 | 26 x 2.10 | 2068 | 27 x 1-3/8 | 2169 |
| 18 x 1.75 | 1350 | 26 x 2.125 | 2070 | 27.5 x 1.75 | 2114 |
| 20 x 1.75 | 1515 | 26 x 2.35 | 2083 | 27.5 x 2.125 | 2174 |
| 20 x 1-3/8 | 1615 | 26 x 3.00 | 2170 | 27.5 x 1.5 | 2074 |
| 22 x 1-3/8 | 1770 | 26 x 7/8 | 1920 | 27.5 x 1.95 | 2146 |
| 22 x 1-1/2 | 1785 | 26 x 1 (59) | 1913 | 29 x 2.1 | 2288 |
| 24 x 1 | 1753 | 26 x 1 (65) | 1952 | 29 x 2.2 | 2298 |
| 24 x 3/4 Tubular | 1785 | 26 x 1.25 | 1953 | 29 x 2.3 | 2326 |
| 24 x 1-1/8 | 1795 | 26 x 1-1/8 | 1970 | 650 x 35A | 2090 |
| 24 x 1-1/4 | 1905 | 26 x 1-3/8 | 2068 | 650 x 38A | 2125 |
| 24 x 1.75 | 1890 | 26 x 1-1/2 | 2100 | 650 x 38B | 2105 |
| 700 x 18C | 2070 | 700 x 19C | 2080 | 700 x 20C | 2086 |
| 700 x 23C | 2096 | 700 x 25C | 2105 | 700 x 28C | 2136 |
| 700 x 30C | 2170 | 700 x 32C | 2155 | 700C Tubular | 2130 |
| 700 x 35C | 2168 | 700 x 38C | 2180 | 700 x 40C | 2200 |
| 700 x 42C | 2224 | 700 x 44C | 2235 | 700 x 45C | 2242 |
| 700 x 47C | 2268 |
P4: Unit Settings
Switch between metric (km/h) and imperial (mph) units. Use the Middle Button (▶▶) to toggle between options.
P5: Power Calibration
If you are using a power meter, this setting allows you to calibrate it. Use the Middle Button (▶▶) to initiate calibration.
Maintenance
- Cleaning: Wipe the device with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners.
- Water Resistance: The CS300 has an IPX7 waterproof rating, meaning it can withstand immersion in water up to 1 meter for 30 minutes. However, it is not recommended for underwater use. Ensure the charging port cover is securely closed to maintain water resistance.
- Battery Care: To prolong battery life, avoid storing the device in extreme temperatures (hot or cold) for extended periods. Charge the device regularly, even if not in use, to prevent deep discharge.
- Storage: Store the device in a cool, dry place when not in use.
Troubleshooting
- Device not turning on: Ensure the device is fully charged.
- GPS signal not acquired: Move to an open outdoor area. Ensure the device is stationary during initial positioning.
- Sensors not connecting:
- Ensure sensors are active and within range.
- Check sensor compatibility on www.coospo.com/faq.
- Verify Bluetooth and location permissions are enabled for the CoospoRide app.
- Data not syncing to app: Try turning the CS300 off and then on again to refresh the connection and initiate data transfer.
- Inaccurate speed/distance: Ensure the correct wheel size is set in the device settings (P3).
Specifications
| Feature | Detail |
|---|---|
| Model Number | CS300 |
| Display Size | 2.6 inches |
| Display Color | Black and White |
| Type | Wireless Stopwatch (Bicycle Computer) |
| Connectivity | Bluetooth, ANT+ |
| Waterproof Level | IPX7 |
| Charging Interface | Type-C |
| Battery Life | Up to 40 hours (1000mAh) |
| Automatic Sleep | Yes |
| Auto-Pause | Yes |
| External Devices Support | Yes |
| Navigation | No (Smartphone app recommended for navigation) |
| Language | English |
| Dimensions (L x W x H) | 20 cm x 13 cm x 3 cm |
| Weight | 0.175 kg |
User Tips
- The CS300 is an excellent choice for beginners due to its ease of use and essential data display.
- For seamless data synchronization with Strava, ensure your CoospoRide app is linked, and sometimes toggling the CS300 off and on can help initiate the sync.
- While the CS300 tracks various metrics, for detailed navigation or map viewing, it's recommended to use your smartphone in conjunction with the device, as the CS300's screen is optimized for data display rather than mapping.
- The device offers intuitive operation, making it quick to learn and use.
- Enjoy the long battery life, which allows for extended rides without frequent recharging.
Frequently Asked Questions (FAQ)
- Q: Is the COOSPO CS300 compatible with E-bikes?
- A: The CS300 is a standard bicycle computer that tracks speed, distance, and other metrics. Its compatibility with E-bike specific data (e.g., motor assist level, battery life of the E-bike) depends on whether the E-bike's sensors transmit data in standard Bluetooth or ANT+ protocols that the CS300 can receive. For basic cycling metrics, it should function.
- Q: Is the COOSPO CS300 compatible with Strava?
- A: Yes, the CS300 can sync ride data to the CoospoRide app, which then integrates with Strava. Ensure your CoospoRide app is linked to your Strava account for automatic uploads.
- Q: Does the CS300 have a thermometer?
- A: Yes, the CS300 displays temperature, which may vary slightly from the actual environment.
- Q: Is Italian language available on the device?
- A: The primary language for the device interface is English. For other languages, please check the CoospoRide app settings for display options or updates.
- Q: How do I connect the CS300 to the CoospoRide app?
- A: Download the CoospoRide app, enable Bluetooth and location permissions, then go to Bike Computer > Add Device > CS300 within the app to connect. Do not pair directly via your phone's Bluetooth settings.
- Q: How do I add external sensors like a heart rate monitor or cadence sensor?
- A: The CS300 automatically detects compatible Bluetooth and ANT+ sensors. You can also manually add them via the CoospoRide app under Devices > CS300 > Add Sensor.
Regulatory Information
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
IC Warning
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Waste Electrical Products Disposal
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Contact your local government or a retailer for additional information.
Product Safety Warnings
- Do not open or modify the product.
- Do not disassemble or attempt to service this product.
- This product is safe under normal and reasonably foreseeable operating conditions.
- If the product is operating improperly, contact COOSPO support.
- The product must be returned to the manufacturer for any service or repair.
Warranty and Support
For technical support, warranty information, or any inquiries regarding your COOSPO CS300, please contact us:
- Website: www.coospo.com
- E-mail: support@coospo.com
A detailed user manual (PDF) is available for download from the official COOSPO website or can be accessed via the QR code provided on the product packaging. You can find the PDF here: COOSPO CS300 User Manual (PDF)