1. Introduction
The CYCLAMI S11 Bicycle Saddle Lamp Mount is a multi-functional extension bracket designed to securely attach various bicycle taillights and radar units to your bicycle's saddle rails. This mount provides a stable and firm attachment point, ensuring your safety devices are optimally positioned. It is compatible with a wide range of devices, including Garmin Radar series (RT510, RTL515, RVR315, L308, L508, TL30), Coospo Tr70, and igpsport SR mini.
Image: The CYCLAMI S11 mount installed on a bicycle saddle, demonstrating its use with various radar taillight models.
Image: The S11 mount viewed from the front, installed under a bicycle saddle, highlighting its stable design.
2. Package Contents
Please check the package to ensure all items are present:
- 1x Extension Bracket (Tail Light Bracket)
- 1x Hexagonal Wrench
- 4x Zip Ties
Image: All components included in the CYCLAMI S11 package.
3. Specifications
| Parameter | Value |
|---|---|
| Product Name | Radar Tail Light Bracket |
| Color | Black |
| Material | Nylon with fiber |
| Weight | Approximately 11.6g |
| Length | 60mm |
| Height | 51mm |
| Width | 14mm |
| Mount Diameter | Ø34mm |
Image: Visual representation of the S11 mount's dimensions.
4. Installation Guide
Follow these steps to install the CYCLAMI S11 mount on your bicycle:
- Position the Bracket: Place the extension bracket onto the saddle rails of your bicycle. Ensure it is centered and positioned as desired.
- Secure with Zip Ties: Use the provided zip ties to firmly attach the bracket to the saddle rails. Thread the zip ties through the designated slots on the bracket and around the saddle rails. Pull them tight to ensure a secure fit.
- Adjust Orientation (if needed): The central mounting plate can be rotated for horizontal or vertical orientation. Loosen the screws on the mounting plate using the hexagonal wrench, rotate it to the desired position, and then tighten the screws firmly.
- Final Check: Once installed, gently tug on the mount to ensure it is stable and does not shake. Trim any excess length from the zip ties, ensuring no sharp edges remain that could scrape your legs.
Image: Step-by-step diagram for installing the saddle mount using zip ties.
Image: Illustration of how to adjust the mount's orientation by rotating the central plate.
5. Operating Instructions
Once the CYCLAMI S11 mount is securely installed, you can attach your compatible taillight or radar unit:
- Attaching Device: Align your Garmin-compatible device (e.g., Garmin Varia radar, taillight) with the quarter-turn interface on the mount. Push the device onto the mount and twist it clockwise until it clicks into place.
- Detaching Device: To remove your device, twist it counter-clockwise until it disengages from the mount.
The mount is designed to hold your device firmly, providing a stable platform during your rides.
6. Maintenance
To ensure the longevity and optimal performance of your CYCLAMI S11 mount:
- Cleaning: Wipe the mount with a damp cloth to remove dirt and grime. Avoid using harsh chemicals that may damage the material.
- Inspection: Periodically check the zip ties and screws for tightness. Re-tighten if necessary to maintain a secure attachment.
- Storage: If removing the mount for extended periods, store it in a cool, dry place away from direct sunlight.
7. Troubleshooting
- Mount feels loose: Ensure the zip ties are pulled tight and the screws on the central plate are securely fastened. Replace zip ties if they show signs of wear.
- Device does not attach securely: Verify that your device uses a standard quarter-turn mount compatible with Garmin. Ensure no debris is obstructing the mounting interface.
8. User Tips
- When securing the mount with zip ties, carefully plan where to trim the excess to avoid sharp edges that could rub against your legs during cycling.
- The central section of the mount can be rotated and re-screwed to accommodate different quarter-turn lights or preferred orientations.
- Users have noted the mount feels sturdy, is easy to install, and is lightweight, holding devices like Garmin radar firmly.
9. Frequently Asked Questions (FAQ)
- Q: Is this mount compatible with non-Garmin devices?
- A: The mount features a standard quarter-turn interface, which is commonly used by Garmin and other brands. It has been confirmed to work with devices like Coospo Tr70 and igpsport SR mini. For other brands, please check if they use a Garmin-compatible quarter-turn mounting system.
10. Warranty and Support
For any questions, technical support, or warranty claims, please contact the seller or manufacturer directly. Refer to the original product packaging or purchase documentation for specific contact information.
A digital user manual (PDF) is available for download. You can access it via the following link: View User Manual (PDF)
Manufacturer Contact Information:
- E-Mail: cyclami@outlook.com
- Web: www.cyclami.com
- Address: 7th Floor, Second Industrial Building, No. 16 Jingle Road, Xiangzhou District, Zhuhai City, Guangdong Province, China