1. Product Overview
Thank you for purchasing the Ajazz AJ179 Series Wireless Gaming Mouse. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance.


2. Package Contents
Please check the package for the following items:
- Ajazz AJ179 Series Mouse (x1)
- 2.4G Wireless Receiver (x1)
- USB Type-C Cable (x1)
- Magnetic Suction Charging Base (x1)
- Instruction Manual (x1)
3. Setup and Connection
3.1 Charging the Mouse
Before first use, it is recommended to fully charge the mouse.
- Connect the USB Type-C cable to the charging base and a power source (e.g., computer USB port, USB wall adapter).
- Place the mouse onto the magnetic suction charging base. Ensure the charging pins align.
- The dynamic white light on the charger will run from bottom to top during charging. It will turn off when fully charged.

3.2 Connection Modes
The Ajazz AJ179 Series mouse supports three connection modes: 2.4G Wireless, Bluetooth, and Wired.
3.2.1 2.4G Wireless Connection
- Set the power switch on the bottom of the mouse to the '2.4G' position.
- Take out the 2.4G receiver from the mouse or charging base and plug it into a free USB port on your computer.
- The computer will automatically install the necessary drivers. Once prompted that the installation is complete, the mouse is ready for use.
- If the computer does not respond, try a different USB port.
Re-pairing 2.4G Receiver (if connection fails):
- Set the power switch to '2.4G'.
- Press and hold the code matching button (usually located on the bottom of the mouse). The mode light will flash red quickly.
- Once successfully paired, the mode light will turn red for about one second and then turn off.
3.2.2 Bluetooth Connection
- Set the power switch on the bottom of the mouse to the 'Bluetooth' position.
- The mouse has two Bluetooth channels: BT1 (green light) and BT2 (blue light). Short press the channel selection button (usually on the bottom or top of the mouse) to select your desired channel. The corresponding light (green for BT1, blue for BT2) will flash.
- Press and hold the channel selection button for approximately three seconds. The selected Bluetooth channel light will flash rapidly (green for BT1, blue for BT2), indicating pairing mode.
- On your device (computer, phone, etc.), enable Bluetooth and search for 'X11 mouse 1' (for BT1) or 'X11 mouse 2' (for BT2).
- Select the mouse to connect. Once connected, the pairing light will stay on for about one second and then turn off.
3.2.3 Wired Connection
- Connect the provided USB Type-C cable from the mouse to a USB port on your computer.
- The mouse will automatically switch to wired mode and begin charging.
- The mouse can be used normally in wired mode.
4. Operating Instructions
4.1 Button Functions
The mouse features several programmable buttons for enhanced gaming and productivity:
- Left Click Button: Standard primary click.
- Right Click Button: Standard secondary click.
- Scroll Wheel: Scroll up/down, and middle click.
- Forward Button: Navigates forward in web browsers/applications.
- Backward Button: Navigates backward in web browsers/applications.
- DPI Adjustment Button: Cycles through DPI settings.
- Power Switch: Selects connection mode (OFF/2.4G/Bluetooth).
4.2 DPI Adjustment
Press the DPI adjustment button to cycle through different sensitivity levels. Each DPI setting is indicated by a specific LED color:
- 800 DPI (Red)
- 1600 DPI (Green)
- 2400 DPI (Blue)
- 3200 DPI (Yellow)
- 5000 DPI (Cyan)
- 22000 DPI (Purple)
4.3 Return Rate (Polling Rate)
The mouse supports adjustable return rates, which can typically be configured via software (if available) or by specific button combinations. Default rates are 125/250/500/1000 Hz. The AJ179 PRO model supports up to 8000Hz wireless return rate.

4.4 Sleep Mode
To conserve battery life, the mouse enters sleep mode after periods of inactivity:
- Shallow Sleep: The mouse stops working and enters shallow sleep immediately after a short period of inactivity. Move the mouse to wake it up.
- Deep Sleep: The mouse enters deep sleep if there is no operation for 10 minutes. Click any button to wake it up.
5. Maintenance and Care
- Cleaning: Use a soft, dry cloth to clean the mouse. Do not use harsh chemicals or abrasive materials.
- Avoid Liquids: Do not immerse the mouse in liquid or spray it with liquid.
- Temperature and Humidity: Avoid using the mouse in high-temperature or high-humidity environments.
- Storage: Store the mouse in a dry place away from direct sunlight and open flames.
- Handling: Do not press the mouse buttons with excessive force or disassemble the mouse.
- Charging: Use only the provided USB Type-C cable and a standard USB power source. Do not use fast chargers, as this may damage the battery.
6. Troubleshooting
- Mouse Not Responding: Ensure the mouse is charged. Check the power switch position. For 2.4G, try plugging the receiver into a different USB port. For Bluetooth, ensure it's paired correctly and try re-pairing. For wired mode, ensure the cable is securely connected.
- Connection Issues (2.4G): Refer to the 'Re-pairing 2.4G Receiver' steps in Section 3.2.1.
- Bluetooth Pairing Failure: Ensure the mouse is in pairing mode (rapidly flashing light). Remove any previous pairings of the mouse from your device's Bluetooth settings and try again.
- Intermittent Connection: Ensure there are no major obstructions between the mouse/receiver and your computer. Avoid using the mouse near strong interference sources (e.g., Wi-Fi routers, other wireless devices).
- Charging Issues: Ensure the USB Type-C cable is properly connected to both the charging base and the power source. Ensure the mouse is correctly seated on the magnetic charging base.
7. Specifications
| Feature | Specification |
|---|---|
| Model | AJ179, AJ179P, AJ179 PRO |
| Sensor | Pixart PAW3395 |
| DPI Range | 800 - 26000 DPI (Adjustable) |
| Tracking Speed (IPS) | 600 IPS (AJ179/AJ179P), 750 IPS (AJ179 PRO) |
| Acceleration | 50 G |
| Lift-Off Distance (LOD) | 1.0 mm (AJ179 PRO) |
| Return Rate | 125/250/500/1000 Hz (Wired/Wireless), up to 8000 Hz (AJ179 PRO Wireless) |
| Connectivity | USB Type-C (Wired), 2.4G Wireless, Bluetooth |
| Number of Buttons | 6 |
| Switch Type | HUANO (100 Million Clicks Lifetime) |
| Battery Capacity | 400 mAh |
| Weight | Approx. 58g ± 3g |
| Dimensions | 128 x 64 x 40.5 mm |
| Wireless Range | Up to 10 meters |
| Compatible OS | Windows XP/7/8/10/11, Mac OS, Android, Linux |


8. User Tips
- Optimize DPI: Experiment with different DPI settings to find what feels most comfortable and precise for your specific tasks or games.
- Polling Rate: For competitive gaming, higher polling rates (e.g., 1000Hz or 8000Hz on PRO models) can provide a more responsive experience.
- Battery Management: To extend battery life, remember to turn off the mouse when not in use for extended periods, or utilize its sleep modes.
- Firmware Updates: Check the official Ajazz website periodically for any available firmware updates for your mouse model, which can improve performance or fix bugs.
9. Warranty and Support
For warranty claims, technical support, or further assistance, please contact your retailer or the official Ajazz customer service. Keep your proof of purchase for warranty validation.