1. Product Overview
This manual provides instructions for the installation, operation, and maintenance of your new heated side mirror glass. This product is designed as a replacement for the original rearview mirror glass in compatible Ford vehicles.
1.1 Product Identification
- Product Name: Heated Side Mirror Glass
- Applicable Models: Ford Escape (2013-2016), Ford C-Max (2013-2018)
- Special Features: Integrated heating element for defrosting and defogging.
1.2 Manufacturer Information
Manufacturer: Guangzhou Kuxiong Shi Trading Co., Ltd.
No. 503, Building 3, Courtyard 2, Zhongquantang Road, Industrial Avenue, Haizhu District, Guangzhou City
Contact: +86-18814180059, tingting26181@outlook.com
EU Authorized Representative: Sea&Mew Consulting GmbH
Mittenhuber Straße 4, 92318 Neumarkt
Contact: +4915224685061, Compliance.EU@outlook.com
2. Safety Information
- WARNING: Before driving, always ensure you have a clear view through all mirrors.
- WARNING: Do not modify the vehicle or the mirror assembly in ways not specified in this manual, as this may compromise driving safety and product functionality.
This product is marked with the CE symbol, indicating compliance with European safety, health, and environmental protection requirements.
3. Product Specifications
| Feature | Description |
|---|---|
| Material | Glass and Plastic |
| Special Features | Heated |
| OEM NO. | CJ5Z17K707B, CJ5Z17K707G |
| Item Type | Mirror & Covers |
| Approximate Length | 18.5 cm / 7.28 inches |
| Package Weight | 0.21 kg |
| Package Dimensions (L x W x H) | 20 cm x 15 cm x 3 cm |

4. Installation Instructions
4.1 General Preparation
- Before beginning, verify that the mirror glass is compatible with your specific car model and year.
- Ensure the housing clips on your vehicle's mirror assembly match the base of the new mirror glass.
4.2 Disassembly of Old Mirror Glass
- Adjust the lens angle of the existing mirror to one side to create a gap.
- Carefully reach into the gap and pry the mirror outwards with appropriate force. Alternatively, a suction cup can be used to pull the mirror out. It is recommended to use a professional pry bar to avoid scratching the paint or breaking the clips.
4.3 Installation of New Mirror Glass

- If your vehicle has a heated mirror function, align the base heating harness plug on the new mirror glass with the corresponding connector in the mirror assembly. Connect them securely.
- Align the lens base of the new mirror glass with the motor chuck (the mechanism that adjusts the mirror angle) inside the mirror assembly.
- Push the mirror glass evenly and firmly until you hear a distinct "click" sound. This indicates that the mirror is properly seated and locked into place.
4.4 Installation of Mirror Frame (if applicable)
If you are also replacing the mirror frame, follow these steps:
- Before installation, ensure all clips on the new mirror frame are intact, without any breakage or deformation.
- Align the mirror frame with the rearview mirror base, making sure the top, bottom, left, and right slots are perfectly aligned.
- Press the frame evenly from one end to the other until you hear a "click," confirming that the clips are fully engaged and locked.
- After installation, gently pull on the frame to confirm there is no looseness and that the edges are completely flush with the vehicle body.
5. Operation
5.1 Mirror Adjustment
Once installed, the mirror glass can be adjusted to your preferred viewing angle using your vehicle's standard mirror adjustment controls (e.g., joystick or buttons on the door panel).
5.2 Heated Function

This mirror glass features an integrated heating element. When activated, this element helps to quickly clear frost, ice, and fog from the mirror surface, improving visibility in cold or humid conditions. The heated function typically activates automatically with your vehicle's rear defroster system or via a dedicated switch on your dashboard or door panel.
6. Maintenance
6.1 Cleaning the Mirror Surface
To clean the mirror surface, use a soft, damp cloth. Gently wipe the surface to remove dirt and smudges. Do not use dry cloths, abrasive materials, or harsh chemical cleaners, as these can scratch the lens surface or damage the mirror's coating.
7. Troubleshooting
7.1 Mirror Not Heating
- Ensure your vehicle's defroster or heated mirror function is activated.
- Check the wiring connections at the back of the mirror for any looseness or damage.
- If the issue persists, there may be a problem with the vehicle's electrical system or the mirror's heating element. Consult a qualified automotive technician.
7.2 Mirror Loose or Vibrating
- Re-check the installation steps to ensure the mirror glass and frame (if applicable) are fully engaged and flush with the mirror assembly.
- Verify that the mirror glass is securely seated in the motor chuck.
7.3 Unclear View or Distortion
- Ensure the mirror surface is clean and free from smudges or residue.
- Verify that the mirror is correctly seated and not warped. If the mirror glass itself appears to have manufacturing defects causing distortion, contact customer support.
8. User Tips
- Compatibility Check: Always double-check the product's compatibility with your specific car model, year, and existing mirror features (e.g., electric adjustment) before purchase and installation.
- Installation Tools: When disassembling the old mirror, using a professional pry bar is highly recommended to prevent accidental damage to your vehicle's paint or the mirror assembly clips.
- Quality Inspection: Upon receiving your new mirror glass, carefully inspect it for any visual defects, distortions, or damage that might affect its functionality or clarity.
9. Warranty and Support
For any questions, technical assistance, or information regarding potential warranty claims, please contact the manufacturer, Guangzhou Kuxiong Shi Trading Co., Ltd., or their EU Authorized Representative, Sea&Mew Consulting GmbH, using the contact details provided in Section 1.2 of this manual.
A detailed user manual in PDF format is also available for reference: View User Manual (PDF)