CHANTOWER Pure Sine Wave Inverter Series

Contents

CHANTOWER Pure Sine Wave Inverter User Manual

Model: Pure Sine Wave Inverter Series (2000W - 5500W)

Brand: CHANTOWER

1. Introduction

This manual provides detailed instructions for the safe and efficient operation of your CHANTOWER Pure Sine Wave Inverter. Please read this manual carefully before use to ensure correct operation and to prevent damage.

Product Features

  • Lightweight and compact design.
  • High efficiency with low working noise.
  • Utilizes efficient SPWM Pulse Width Control Technology.
  • Incorporates multiple high-tech and intelligent driver chips.
  • SMT Chip Mounting Technology ensures precise control, high reliability, and low failure rate.
  • High conversion rate, strong load capacity, and wide application range.
  • Multiple intelligent security protections with complete protection functions.
CHANTOWER Pure Sine Wave Inverter 5500W
Front view of the Pure Sine Wave Inverter, showing wattage options and brand.

2. Safety Information and Usage Environment

Requirements for the Usage Environment

  • Dry Environment: Do not immerse the inverter in water or expose it to rain.
  • Temperature Conditions: Operate in a cool place with a temperature between 0°C and 40°C.
  • Space Conditions: Do not use the power inverter in a narrow space. Do not cover the machine during use. Ensure good ventilation around the unit.

Important Precautions

  • When starting appliances with high peak power (e.g., refrigerator compressors, motors), the inverter may trigger overload protection. Turn off all electrical switches first, then turn on the inverter switch, and then turn on electrical switches one by one, starting with the highest peak electrical appliance.
  • Monitor battery voltage. If the DC input voltage drops (e.g., 10.4-11.0V for a 12V battery), an alarm will sound. Turn off sensitive electronics immediately. The inverter will stop outputting current if the voltage drops further (e.g., 9.7-10.3V for a 12V battery), and the red indicator light will illuminate.
  • Start the vehicle or charge the battery promptly to prevent depletion and extend battery life.
  • Avoid input voltages exceeding the specified limits (e.g., over 16V for a 12V battery) to prevent damage to the inverter.
  • Ensure adequate airflow and keep the inverter away from high-temperature objects, especially after continuous use when the casing temperature may rise to 60°C.
  • This power inverter is prohibited for use by minors.

3. Main Components Overview

Familiarize yourself with the key parts of your power inverter:

Diagram of inverter components showing AC sockets, LCD display, positive and negative terminals, and cooling fans.
Detailed view of the inverter's front and rear panels, highlighting AC sockets, LCD display, positive terminal (red), negative terminal (black), and efficient cooling fans.
  • Indicator Light: Green indicates normal operation; Red indicates protection status (e.g., overvoltage, undervoltage, overload, overheating).
  • Universal Shaped Socket: For connecting AC appliances.
  • Independent Switch: Power ON/OFF switch for AC output.
  • Input Terminal Positive Terminal (Red): Connects to the positive terminal of the DC power source.
  • Input Negative Terminal (Black): Connects to the negative terminal of the DC power source.
  • Efficient Cooling Fan: Helps dissipate heat during operation.
  • LCD Display: Shows real-time voltage, wattage, and battery status.

4. Setup and Connection

Direct Connection to Battery

When connecting directly to a battery, ensure the battery's input voltage matches the inverter's specified input voltage. Multiple batteries can be used in parallel for increased capacity.

Diagram showing direct battery connection to inverter for 220V output.
Connection diagram for direct battery use, illustrating DC input to the inverter and 220V AC output.

Connection Method for Car Cigarette Lighters

This method is suitable for power inverters equipped with a car cigarette lighter model. Note that the cigarette lighter output can only handle electrical appliances with a load of less than 150W. For loads exceeding 150W, use the direct battery connection method.

Diagram showing inverter connection via car cigarette lighter for 220V output.
Connection diagram for car cigarette lighter use, showing 12V input from the cigarette lighter to the inverter and 220V AC output for small appliances.

Connection Method for Electric Motorcycles

For electric motorcycles, the voltage of four batteries is typically 48V, and five batteries is 60V. Select an inverter with an input voltage that matches the specific voltage marked on your electric motorcycle.

Diagram showing inverter connection to an electric motorcycle battery for 110V output.
Connection diagram for electric motorcycle use, showing power input from the motorcycle battery to the inverter and 110V AC output.

5. Operating Instructions

  1. Ensure the inverter switch is in the OFF position. Connect the inverter to the battery, ensuring good contact.
  2. Verify that the total power of all electrical appliances is within the inverter's rated continuous power (typically 50% of peak power). For inductive loads, ensure their peak power does not exceed the inverter's peak power. Plug the electrical appliance into the inverter's AC output socket.
  3. Turn on the switch of the power inverter. The green indicator light should illuminate, indicating normal operation.
  4. If the red indicator light illuminates, it signifies that the inverter has turned off due to overvoltage, undervoltage, overload, or overheating. Refer to the troubleshooting section.
  5. If using a vehicle cigarette lighter socket, the inverter may alarm or shut down due to limited output. Start the vehicle or reduce power consumption to restore normal operation.
Inverter connected to various household and power tools.
The inverter can power a wide range of electrical appliances, from household items to power tools.

6. Technical Specifications

FeatureSpecification
Brand NameCHANTOWER
Model Number5000W (Available in 2000W, 3000W, 4000W, 4400W, 5000W, 5500W variants)
Output Power>1000KW (This seems to be a general category, actual output depends on model)
TypeDC/DC Converters (Pure Sine Wave Inverter)
Output TypeSINGLE
Output Frequency50/60Hz
Output Voltage110V/220V (depending on model selection)
Input Voltage10-15V (12V), 22-30V (24V), 40-60V (48V), 60-80V (60V/72V)
Current WaveformCorrected Sine Wave or Pure Sine Wave
Built-in Fuse10A/15A/20A/40A/70A/120A/240A (varies by model)
Under Voltage Alarm10.4-11.0V (12V), 20.5-22V (24V), 42-45V (48V), 54-57V (60V/72V)
Low Pressure Shutdown9.7-10.3V (12V), 19.4-20.6V (24V), 39-42V (48V), 48-52V (60V/72V)
Overpressure Shutdown14.5-15.5V (12V), 29-31V (24V), 58-62V (48V), 74-80V (60V/72V)
No-load Current<0.3A
Conversion Rate>90%
Weight3kg
Size380*150*90mm
CertificationCE

7. Common Problems & Solutions

Abnormal PhenomenonReasonResolution Method
The Indicator Light Is Not On, And The Electrical Appliance Is Not WorkingMalfunction Caused By The BatteryCheck if the output voltage of the battery is consistent with the voltage marked on the machine, and replace it according to the specific situation.
Reverse Connection of Positive and Negative PolesCheck the battery connection. The power inverter may be damaged and needs to be replaced or returned for warranty.
Poor Contact at the WiringCheck the connecting wires and connections, and tighten the wiring terminals.
The Indicator Light Is Red, And The Electrical Appliance Is Not WorkingElectrical Appliance Exceeds Continuous PowerUse electrical appliances with a power lower than the continuous power of the power inverter.
Electrical Appliance Peak Power Too HighThe peak power of the electrical appliances used should be within the peak power range of the power inverter.
Battery Discharged (Alarm)Charging or replacing the battery.
Poor Ventilation, Causing Overheating ShutdownTurn off the machine, cool down for 15 minutes, remove items around the fan and converter, place the inverter in a cool place, reduce the use of electrical appliances as required, and restart.
Detected That The Output Voltage Of The Power Inverter Is Too LowInput Voltage Too HighCheck the working status of the charging system.
The Measured Output Voltage Of Voltmeter Is Too LowThe output data of the correction wave inverter should be measured using a "true RMS multimeter" to obtain accurate data.
The Power Inverter Emits A Buzzing Alarm SoundUndervoltage or over-temperature protectionShorten or use thicker wires to connect the battery, lower the temperature of the machine, improve ventilation conditions around the machine, place the machine in a cool place, and reduce the use of electrical appliances as required.
The Power Inverter Can Only Be Used For Low-power AppliancesWhen Current Passes Through A Wire, The Voltage DecaysReduce the length of the wire and use thicker wires.
Battery Usage Time is Too ShortElectrical Power Consumption Is Greater Than The Rated Power Of The Power InverterUsing a larger capacity battery.
Poor or damaged battery healthReplacing the battery.
The Electricity Stored After Being Fully Charged Is Still Insufficient / Current Decays As It Passes Through A WireThe charger cannot fully charge the appliance, replace it with a better intelligent charger. / Reduce the length of the wire and use thicker wires.

8. Maintenance

  • Keep the inverter clean and free from dust. Use a dry cloth to wipe the exterior.
  • Ensure proper ventilation by regularly checking that the cooling fans are not obstructed and are functioning correctly.
  • Periodically check all wiring connections to ensure they are secure and free from corrosion. Tighten any loose terminals.
  • Store the inverter in a dry, cool place when not in use for extended periods.
  • Avoid operating the inverter in harsh environments (e.g., excessively dirty or old conditions) to prevent damage.

9. User Tips

  • Cable Quality: Use powerful and heavy-gauge cables, preferably copper, for optimal performance, especially when running close to full power for extended periods.
  • Load Testing: The inverter can handle significant loads. Users have successfully powered boilers (up to 2kW), refrigerators, laptops, and hairdryers (up to 1850W).
  • Battery Compatibility: Ensure your battery voltage matches the inverter's input voltage. For example, a 60V battery that peaks at 67V should ideally be paired with a 60V inverter version that can handle such peaks without tripping.
  • Voltage Display Accuracy: Some users noted that the voltage indicator might show slight variations. If precise readings are critical, consider using an external true RMS multimeter.
  • Cooling: Ensure good ventilation, especially when powering high-wattage appliances, as the unit can get warm.

10. Warranty and Support

Warranty Terms

To ensure proper after-sales service, customers must strictly follow the instructions when receiving the product. This product comes with a three-year warranty.

  1. Product Exchange Application: Accessories must be complete and not affect secondary sales. Missing relevant accessories will incur deductions based on factory price.
  2. Product Warranty Application:
    • If the machine encounters quality problems without opening or modifying the original packaging, it will be repaired or replaced. Send it back to the manufacturer for free repair.
    • If quality problems arise due to unauthorized opening or modification, maintenance will be paid.
  3. Damage from Harsh Environments: If the machine casing is too dirty or old and used in harsh environments, resulting in product damage, maintenance will be paid.
  4. High-power Machine Casings: Severely scratched, dirty, or old high-power machine casings should be returned to the factory for repair. If repaired within the warranty period, the machine will be returned to the customer in its original condition and repaired for free. For machines modified or unpacked without permission, any malfunctions will incur paid maintenance. Contact customer service for specific costs.
  5. After receiving relevant fees, after-sales service will be promptly handled, and the product delivered to the customer by express delivery.

For further assistance or to obtain the return address and phone number for returns and exchanges, please contact customer service.

A user manual in PDF format is also available for download: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.